How many Read Only Cache Groups?

How many Read Only Cache Groups we can createin in one DSN?
I mean if e.g. 100 are possible?
Thanks
BR
Andrzej
Edited by: user8181100 on 2009-04-07 05:53

As many as you like. There is no fixed upper limit.
Chris

Similar Messages

  • Can an unique index be created on read only cache group

    Hi
    Can an unique index be created on read only cache group
    Regards
    Siva Kumar

    No, I do not think so. Creating a unique index could cause autorefresh operations to fail if the data being refreshed contains duplicate values that would not be allowed by the index. You can create regular indexes on a table in a readonly cache group.
    Chris

  • Suggestions required for Read-only cache group in timesten IMDB cache

    Hi
    In IMDB Cache , If the underlying oracle RAC is having two schemas ( "KAEP" & "AAEP" , having same sturcture and same name of objects ) and want to create a Read-only cache group with AS pair in timesten.
    Schema                                              
        KAEP  
    Table  
        Abc1
        Abc2
        Abc3                                    
    Schema
        AAEP
    Table
        Abc1
        Abc2
        Abc3
    Can a read-only cache group be created using union all query  ?
    The result set of the cache group should contain both schema records in timesten read-only cache group will it be possible ?
    Will there be any performance issue?

    You cannot create a cache group that uses UNION ALL. The only 'query' capability in a cache group definition is to use predicates in the WHERE clause and these must be simple filter predicates on the  tables in the cache group.
    Your best approach is to create separate cache groups for these tables in TimesTen and then define one or more VIEWS using UNION ALL in TimesTen in order to present the tables in the way that you want.
    Chris

  • How to boot only one group in remote machine from master machine

    Hi,
    I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
    Thanks
    Amit

    You can boot the entire remote machine (after booting the Master machine) as follows:
    tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
    For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
    Regards,
    Malcolm.

  • Read-only radio group losing value on validation error

    It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
    For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
    Is this a bug or am I simply missing something?
    Apex 3.1.2
    Rgds/Mark M.

    It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
    1 Display=Yes, Return=Y
    2 Display=No, Return=N
    The settings in the LOV section on the item iteself:
    Named LOV: LOV_YN
    Display Extra values: No Dynamic translation: Not translated
    Number of columns: 2 Display null: No
    Null display value is blank as is null return value
    Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
    Rgds/Mark M.

  • How many vendor  and customer groups

    Hi,
    Seniors can any one explain,
    normally  for foreign client
    how many vendor ,  Customer  account groups maintained in the projects
    Plz  give me the  account group name details

    Hello,
    The customer / vendor account groups are mainly depends on the requirement of the client.
    The requirement depends on how their customer / vendors are depends on the following things
    (a) Number Range - How many number ranges are required (either channel / one time customer / Division Specific / Geographic Specific etc)
    (b) Field Display / Mandatory during Master Record - Few fields are mandatory for certain range customers etc
    (c) Assignment of Reconciliation Account- How your schedule -VI of the companies act required.
    This is for your information.
    Regards
    Anilkumar

  • Read Only for "Group" and "Others" via SMB

    I see when Windows vista users of my OS X 10.5.8 server save a file to the server, the permissions show on the server as Read & Write for the owner and Read Only for 'Group' and 'Others'.
    Is there a way I can make the OS X server always make 'Group' and 'Others' always be Read & Write?
    Thanks!

    It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
    1 Display=Yes, Return=Y
    2 Display=No, Return=N
    The settings in the LOV section on the item iteself:
    Named LOV: LOV_YN
    Display Extra values: No Dynamic translation: Not translated
    Number of columns: 2 Display null: No
    Null display value is blank as is null return value
    Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
    Rgds/Mark M.

  • HT2486 Where and how can you see how many members in a group?

    I wish to know how many members I have in my group. In the old address book I just clicked on the group and it told me but now it doesnt. PLease help

    Scroll to the bottom of the list. If the contacts inside a group are just a few, there is no counter.

  • Read Only RPD Group

    Can you create a group in the OBIEE Admin Tool (RPD) that has read only rights to the RPD? I want to grant access to the RPD to a group of users, but do not want them to be able to make any changes to the RPD. Is this possible?

    hi,
    Only a user who belongs to Administrators group can access/login to rpd there no question of having read only access to rpd
    Thanks,
    Saichand.v

  • How to sync only one group of contacts

    I have created a "Group" of contacts in Address Book that are just those that I would like to carry on my iPhone 4. How can I set-up/sync only that group. Also, the bluetooth system on my auto, grabs the whole contact list, rather than the group that is "up front" on the iPhone. 
    Normally, I sync my iPhone thru Mobile Me, and when I try to sync through iTunes, I get a message warning me that this could create duplicates.  Of course, I would like to avoid this. Would appreciate suggestions.

    Page 10 of the manual:
    "You can sync contacts with applications such as Mac OS X Address Book, Microsoft
    Entourage, Yahoo! Address Book, and Google Address Book on a Mac, or with Yahoo!
    Address Book, Google Address Book, Windows Address Book (Outlook Express),
    Vista Contacts, or Microsoft Outlook 2003 or 2007 on a PC. (On a Mac, you can sync
    contacts with multiple applications. On a PC, you can sync contacts with only one
    application at a time.) "
    Are you trying to sync with two different applications?
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • How enable read only access for ACS server itself

    Hi,
    We would like to know whether its possible to create a read only access to the ACS server. Currenlty ACS server has a generic login with full admin rights.
    We need to create a login to couple of users to log into ACS to check the "Report and Activity" tab. Access to all other tabs should be disabled.
    We are using ACS4.0 verison. Please let me know whether its possible.
    Thanks
    Nachi

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • How to read only particualr columns from excel sheet to internal table

    Hi,
    I have and excel sheet which has around 20 columns, in which i want to read only 6 columns. They are at different column positions, means the 1st column, 6thcolumn, 8th column so on..
    Can we do this in sap? do we have any FM to do this?
    Thanks.
    Praveena.

    hi,
    Use the below logic to fetch the data into internal table..You need to read the data cell by cell and update the internal table,
    DATA l_count TYPE sy-tabix.
       CONSTANTS: lc_begin_col TYPE i VALUE '1',
                  lc_begin_row TYPE i VALUE '2',
                  lc_end_col   TYPE i VALUE '2',
                  lc_end_row   TYPE i VALUE '3000'.
      CLEAR p_i_excel_data. REFRESH p_i_excel_data.
    * Function module to read excel file and convert it into internal table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = p_p_file
           i_begin_col             = lc_begin_col
           i_begin_row             = lc_begin_row
           i_end_col               = lc_end_col
           i_end_row               = lc_end_row
         TABLES
           intern                  = i_data
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
    * Error in file upload
       IF sy-subrc NE 0 .
         MESSAGE text-006 TYPE 'E'.
         EXIT.
       ENDIF.
       IF i_data[] IS INITIAL .
         MESSAGE text-007 TYPE 'E'.
         EXIT.
       ELSE.
         SORT i_data BY row col .
    * Loop to fill data in Internal Table
         LOOP AT i_data .
           MOVE i_data-col TO l_count .
           ASSIGN COMPONENT l_count OF STRUCTURE p_i_excel_data TO <fs_source> .
           MOVE i_data-value TO <fs_source> .
           AT END OF row .
    * Append data into internal table
             APPEND p_i_excel_data.
             CLEAR p_i_excel_data.
           ENDAT .
         ENDLOOP .
       ENDIF .

  • How do I change permissions for West Dig USB HD, how said "read only" and can't use it.

    I have a West Did Hard drive from my PC that want to use on my Macbook.  Looking at the permissions said "read only".  I tried to move files on the drive and could not when attached to my Macbook.  Where do I change these settings that will allow me to use this drive.  Thanks for any help.
    This is my first Mac so do not know much about the Mac process, moving slow and steady.
    Donco

    Was this drive in use with a windows machine previously?
    If yes then I would guess that it is formatted as NTFS, Mac's can not write to NTFS discs.
    If you have sufficient space on your Mac copy the disk contents to a folder on your desktop and reformat the drive for use with Mac and Windows, then put the files back.
    Post back with some answers and I'll try to guide you through this

  • PSE 10 Can't edit read-only layer groups (a.k.a.  I just want to make a custom DVD menu in Elements)

    A little background: I wanted to make a custom menu so I opened a copy of one of the canned menu.PSD files in PS Elements 10.  It opened up with all layers and their sublayers showing.  So far, so good.  I did a bunch of editting and had my menu just about right, saved it and burned a DVD with it.  I saw some corrections that I needed to make so I opened the same .PSD file and it showed all the main layers (with the folder icon) but not the attached layers. 
    I double-clicked to open these layers and got:
    "You are attempting to open a group, which is not supported in Photoshop Elements.  The layers in this group will be simplified into a single layer.  Simplify the layers? Yes No."
    I was just editing these things the day before yesterday.  All I've done since then is register my software online. I have seen it stated in this forum that "Elements doesn't support layer group/sets" but it was referring to an earlier version I'm guessing.
    Question 1:  Is this still true of PSE 10?
    Question 2:  If so, how was I editing them the other day? 
    Thanks in advance for any help you can offer.
    Joe

    If you haven't uninstalled premiere elements then it should work, but there are a few things that will not work when editing the dvd templates:
    (it only works on certain dvd templates and only on a machine with premiere elements installed)
    *If you change the document dimensions either larger or smaller. (not the size of the elements in the template but the overall size such as using
    Image>Resize>Image Size or Canvas Size)
    *If you delete any of the layer groups
    *Changing the name of the document
    There are probably other causes and they may know more on the premiere elements forum:
    http://forums.adobe.com/community/premiere_elements?view=discussions
    MTSTUNER

  • How to read only the most current records in PL/SQL

    Oracle version: 11.2
    I have a table in ORACLE called RATES and there is a EFFECTIVE_DATE, RATE_NAME, RATE_AMOUNT
    RATE
    1 RATE_ONE 1/1/2000 0.10
    2 RATE_ONE 5/1/2005 0.15
    3 RATE_ONE 12/1/2010 0.20
    4 RATE_TWO 10/15/2009 0.33
    5 RATE_THREE 9/7/2011 0.05
    6 RATE_THREE 12/31/2011 0.06
    A rate can be in there multiple times, but the most recent rate is the active rate. I need to query this table and only want to bring back the currently active rows:
    RECORDS 3, 4 and 6
    How can I do this in the most elegant way?
    Can I say:
    SELECT RATE WHERE trunc(sysdate) between EFFECTIVE_DATE and trunc(sysdate);
    (this will not work. I'm not sure how to do this without an exp date column and then I could say
    SELECT RATE WHERE trunc(sysdate) between EFFECTIVE_DATE and END_DATE
    The problem is that I cannot add that column at this time, so need to find a way to do it programatically
    Edited by: userLynx on Feb 1, 2012 8:56 AM

    Try This:
    WITH a
            AS (SELECT 'RATE_ONE' ratename,
                       TO_DATE ('1/1/2000', 'mm/dd/yyyy') eff_date,
                       0.10 amount
                  FROM DUAL
                UNION ALL
                SELECT 'RATE_ONE' ratename,
                       TO_DATE ('5/1/2005', 'mm/dd/yyyy') eff_date,
                       0.15 amount
                  FROM DUAL
                UNION ALL
                SELECT 'RATE_ONE' ratename,
                       TO_DATE ('12/1/2010', 'mm/dd/yyyy') eff_date,
                       0.20 amount
                  FROM DUAL
                UNION ALL
                SELECT 'RATE_TWO' ratename,
                       TO_DATE ('10/15/2009', 'mm/dd/yyyy') eff_date,
                       0.33 amount
                  FROM DUAL
                UNION ALL
                SELECT 'RATE_THREE' ratename,
                       TO_DATE ('9/7/2011', 'mm/dd/yyyy') eff_date,
                       0.05 amount
                  FROM DUAL
                UNION ALL
                SELECT 'RATE_THREE' ratename,
                       TO_DATE ('12/31/2011', 'mm/dd/yyyy') eff_date,
                       0.06 amount
                  FROM DUAL)
    SELECT ratename, eff_date, amount
      FROM (SELECT ratename,
                   eff_date,
                   amount,
                   RANK () OVER (PARTITION BY ratename ORDER BY eff_date DESC) rk
              FROM a)
    WHERE rk = 1

Maybe you are looking for