How much Image Data can the Scenegraph hold? handling big pictures?

I have some jpg pictures that are taken with a standard compact camera.
Pictures are around 2MB in size. I would like to load them full size so I can Zoom into them later.
I can load about 4 of this pictures (total 8MB data), but not 5 of them.
Where is the limitation?
How much Image Data can the Scenegraph hold?
any tweeks or workaround for big pictures?

You mean this:
The default maximum heap size is half of the physical memory up to a physical memory size of 192 megabytes and otherwise one fourth of the physical memory up to a physical memory size of 1 gigabyte.
For example, if your machine has 128 megabytes of physical memory, then the maximum heap size is 64 megabytes, and greater than or equal to 1 gigabyte of physical memory results in a maximum heap size of 256 megabytes.So Java doesn't want to use a lot of ram by default. My 3 Year PC has allready 4 GB Ram. But well there are laptops with 1 or 2 gb RAM. Even my 5 year old video-pc, only there to watch some movies, has 1.2GB RAM. So Whatever, maybe Oracle will change this in Java7 or 8. As well also Anyway, i can do make the a little bit more effiecient, but if someone want to load a jpg captuared with a 12MegaPixel Camera, you just need some Ram.

Similar Messages

How much extra data can you get with Share Everything?

It says that if you need more than 10 GB you can buy 2 GB for $10. Is that a 1 time shot or could someone buy an additional 20 GB for $100? Or even an extra 100 GB for $500 if they wanted too?

rcschnoor wrote:
Brian68 wrote:
Tidbits wrote:
Why would they stop you while you are paying for it? It's an overage and they more than likely let you go as high as what you are willing to pay for like with their other data plans(That are not unlimited).
Well for one if even a small % of people used 100 GB a month I suspect that would hamper the network. That's the whole reason for them scrapping unlimited and having caps isn't it? So I assume there would be some limit. And yes I realize the number of people that would actually do that is extremely small. But if you use a lot of data on a pay for what you use basis as opposed to $30 for unlimited, that extra money can be utilized for the network so it can handle the extra data.
Of course these new plans say up to 10 devices. Unless otherwise stated I assume that could be 10 smartphones. So 10 people could just all be a part of one plan and get data cheaper than if they were all on single plans.
For example 10 individuals who each wanted 4 GB of data would pay $110 a month each on single plans.( $40 for the phone $70 for 4 GB of data ) Combined they could get a plan with 10 phones; $400 for the phones, the initial 10 GB for $100 and another 30 GB for $150( 15 2GB add-ons at $10 each ) for total of $650 so a cost of $65 each. I'm not sure if that's what Verizon had in mind. How many people are going to agree to be financially responsible for the cell phone bills for themselves and 9 of their friends? I know I am not going to take that on my shoulders and I doubt there are many that would. The ones that would, will quickly change their minds when some of their friends start skipping payments for their usage and the person responsible is left holding the bag.
A) I doubt any extar money I pay will IMMEDIATELY be put to use expanding the network. My extra usage is happening NOW while improvements to infrastructure take YEARS.
B) 10 friends? maybe not. 10 family members? maybe. For example under the old plans you couldn't have more than 5 to an account. My friend recently got married to a woman that has 4 kids. All teenage years and older. He has 3 himself. That's 9 people. No way they could all have been on the same plan. Now they can. Whether that's wise or not that's their decision but at least it's an option. And if everyone wanted 2 GB or more data each that would require the purchase of several 2 GB add-ons.

How much attached storage can a mac server handle? What would be the best suggestion for this?

Hello, hopefully I am in the correct location, if not, i apologize. Please bear with me as I am fairly new to MAC server. Here is my dillema. I have a mac graphics group that uses about 6TB of storage currently on a Windows server. We are running into issues such as permissions and searching inability. I was considering moving them to a mac server but will need to add storage to this. What would be recommended for such large disk space? We do currenlty have 2 mac mini servers and all the users are bound to AD as well. Thank you in advance for any suggestions!

One of the Mac Mini Server boxes I deal with has 24 TB hanging off of the box (configured as RAID-6), plus a two-disk RAID-1 mirror set inside the box. That's also a pretty small configuration, both in terms of its physical size and in terms of its storage capacity in the grand scheme of things.
A Mac Pro or Mac Pro Server will do 8 TB inside the box, plus a whole lot more outside the box either direct-attached storage (DAS) or via a Storage Area Network (SAN) configuration, but the performance of a Mac Pro Server is probably overkill for your needs, too.
As much as you are focusing on the capacity, you'll also want to look at how you'll archive and manage that much storage. At how you'll manage and conduct backups of your data.
You'll also be looking at the speed and the design of your network, if you're moving large files around regularly. Gigabit Ethernet does pretty well for small groups, but you may be looking for a different setup of that's not fast enough.

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

How much storage units can be added in the single bin.

Hi all,
Can anybody tell me how much storage units can be added in the single bin.
Dev

Hi Dev,
AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
In bulk storage, you need to define for each block (or row) how many
storage units fit into the block. For this purpose, you must define
both the number of columns as well as the maximum stack height. *The*
product of these factors usually gives the maximum number of storage
+units and is determined automatically by the system. However, it is+
possible to change the maximum number of storage units to a lower number
if the storage bin or the material features require this.
Hope it helps.
Thanks & Regards,

How many contacts can the iPhone hold....now?

This question was asked back in 2008 and has been archived, however I'd like to revisit this issue.
What I'd like to know, is this:
How many contacts can the iPhone hold before it effects performance?
I have a iPhone user with an MS Exchange email account on the phone, Calendar and Contact sync is turned on. The problem is, the user has 10,000 contacts.
The contacts synchronized to the iphone, however, when writing emails or doing any task that accesses the contacts database (i.e. auto-completion of names), There is a good 35 to 40 second lag before you can enter the second letter of a name on the keyboard. I can only assume that this is due to the pure insanity of having 10,000 contacts on a mobile device... The search takes too long. Although it did work just fine on the blackberry (a lessor device ).
Can anyone tell me if there is a limit on how many contacts one can successfully store on an iPhone without running into the "lag" issue?
Thanks in advance.
Nigle

What is the overall size of all these songs?
This will determine how many songs the iPhone can hold.
The actual capacity of an 8GB iPhone is around 7.3 GB - OS X alone takes up approximately 500MB.
You should leave some free space available on the iPhone for general operating purposes and if you access any email accounts and for Safari cache purposes, etc.
So you have around 7GB available - as long as the overall size of all 9400 songs isn't greater than 7GB or so, you are covered.

Is there a limit to how much text I can put in the scrolling sidebar widget in iBooks author?

Is there a limit to how much text I can put in the scrolling sidebar widget in iBooks author? I have recently tried putting about 3,500 words into a scrolling sidebar widget, and I can't seem to get all of the text into the widget. Thoughts? ideas?

There are button limits in the DVD spec (not just Encore).
DVD, 4:3 menu = 36 buttons
DVD, 16:9 menu = 18 buttons

What formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you

what formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you

thanks a lot jerry.
Can I ask you another question?
it works well but it gives me a number like 14,567
and I would like it if it will automatic round up an give me the number 15 in this case.
I do know the seperate folmula to round up numbers but can I combine the two formula's ?
thank you and bye bye

How can one find out how much hard drive space the apps and media are using?

how can one find out how much hard drive space the apps and media are using?

See Here > Where did my Disk Space go?
And Here > The Storage Display

How to insert data to the specified row column of the multi column list box

Hi All
How do i insert data into the specified column of the multi cplumn list box?
I have a table that containsall station nos and name.Then another table contains the data the various stations having at for 24 hrs.That is 12 am to 11 pm.
And i want to display each stations details as follows using a multi column list box/table
My stationinfo table
stnno   stnname......................
s1           stn1
s2            stn2
s3             stn3
The other table
stnno      sysdatetime       data
s1             12am                   1
s2              12am                   4
s1               1 am                 2
So the station s1,s2.... will have data for 24 hrs.
And i want to display it as follows using a multicolumn listbox
stnname        12am   1 am ......................................11pm
s1                   ...................
s2                 ........................
What i have in my mind is to get all station nos
and in a for loop get the station's data from 12 am to 11 pm
or
select every statios data for each hor.But in this case i have to query the database 24 times.So i dont think its a good way.
Or any other better query available?
Can anybody suggest me a good idea?
One more thing...how to insert data into the specified field row or column of a multi column list box?
Thanks in advance

hi
i want to know,,can u say ur need clearly...and i attached two image u see that one
Indrajit
| [email protected] | [email protected] .
Attachments:
station.JPG ‏35 KB
station2.JPG ‏79 KB

How old historical data can be available for SCOM performance views to show up in graphs?

I have created performance rule based on performance counter and created a performance view on the target of the rule. It shows me the graph of how performance counter value changed over the period of time.
In SCOM console there is an option in performance views, to choose start date-time and end date-time for the performance graph. It allows me to select a range of say few years.
However going by the Microsoft documentation, it appears that performance data is stored in OperationsManagerDW database only for limited period.
I have a feature requirement where we need to have performance views or reports or some means where for compliance purpose we should be able to show older data as well.
So my query is exactly how much historical data(up to how old) is actually available for performance views? Is there any specific information or MS documentation available where I can get this information (duration of historical data in specific number of days
or years or so.) I need to decide based on this if I can use performance views or I need to go for some kind of reports like SSRS reports instead.

Hi,
Additionally, I would like to share the following article with you. Hope it helps.
Understanding and modifying Data Warehouse retention and grooming
http://blogs.technet.com/b/kevinholman/archive/2010/01/05/understanding-and-modifying-data-warehouse-retention-and-grooming.aspx
Niki Han
TechNet Community Support

How much does an iPhone 4 8gb hold

I was wondering how much will my iPhone 4 8gb hold. It only give 6gb available. So how many songs apps photos and videos Can I store with in my available 6gb all together
Someone please help this is urgent!!!

on average about 250 - 300 songs per gb but you will have apps and movies of varing lengths, you can go to settings general useage and it will tell you exactly the size of everything on there. That way you could delete a bulky app or movie that you might have on there to free up space. You can delete items from the Settings?General/USeage screen

How much Internet data does Creative Cloud send/receive when it connects?

For a number of reasons, the only Internet access that I have on my main computer (a desktop) is via my phone's mobile hotspot feature. Unfortunately, this means that I have a limited amount of data available. So, before I set up Creative Cloud on my computer, I'd like to verify that CC won't be using up all my data.
The programs that I'll be using are Photoshop, Illustrator, and InDesign. My computer is a PC, if that makes any difference. Can anyone tell me: How much Internet data will these programs use for their routine connections?
Also, if I want to keep up-to-date on the updates, approximately how much additional data would that use?
Thanks much.
P.S. I may not be able to access the Internet at all on my computer for several months. (I'd be transferring documents to and from the computer using a flash drive.) If this happens, will I be able to continue using my CC programs?

Hi CarlaDee,
I think downloading apps and updates will be the most data intensive. With the yearly plan the service would need to do a license check every 99 days. I'd recommend using the trial to get a sense of the bandwidth usage.
-Dave

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

I bouhght my computer a week ago and I spilled a liquid on my keyboard , and i would like to know how much coast to repaid the damage , i didnt buy in the offical apple shop.

i bouhght my Macbook pro retina display 13 Inch i5 a week ago and I spilled a liquid on my keyboard , and i would like to know how much coast to repair the damage in apple store , i didnt buy in the offical apple shop. Some places are asking to pay 620 Pounds.

The only way you can get a valid estimate is by someone examining the MBP directly. Since no one on these forums can see or examine your MBP, you will need to get this infomation from a qualified repair shop. It seems that you already have secured one estimate. You can also bring the MBP to an Apple store and have a genius bar examine it for FREE.
Ciao.

How much Image Data can the Scenegraph hold? handling big pictures?

Similar Messages

Maybe you are looking for