How often is it ok to reset preferences?

Hi, I demonstrate indesign for education a lot, and I am also experimenting with a lot of different mixes of settings, such as type and composition options, units and increments etc, lots of things. Some workshops I am doing will mean that I will have to trash/reset the preference files a lot with the SHIFT>CTRL>OPTION>COMMAND Mac keyboard sequence on startup, like 8 times a day for a week or so between multiple 101 sessions on my machine. Other than me having to reenter my favourites at the end of the session, can it damage my installation of Indesign at all doing this so much?

It shouldn't hurt anything to use Restore Preferences often. However, I'd keep a copy of your preferences to restore them (to save time). This article explains the file which are changed when restoring preferences:
Trash, Replace, Reset, or Restore the application Preferences

Similar Messages

  • My apple id is not working on my ipad no matter how often i reset it

    My apple id doesn't work no matter how often i reset it so I cant download any apps

    You change the name of your ID at https://appleid.apple.com.  See http://support.apple.com/kb/HE40.

  • How to reset Preference settings in Acrobat.

    How to reset Preference settings in Acrobat to default settings.

    Remove restriction passcode
    1. Restore to Factory Default
    http://support.apple.com/kb/HT1414
    2. You can restore from a backup that was done before you enable the Restriction Code.

  • How often do YOU reset your Home Hub, please?

    I have Infinity and Home Hub 3.0 type B.
    I posted a few weeks ago about my wireless printer going off-line. To cut a very long story short, the problem was my Home Hub. After resetting it, as someone here advised, my printer worked OK.
    The same thing happened last week so out came the giant paperclip and I reset my Home Hub = worked.
    I'm having problems connecting to a site - on both my IE8/XP and Win7/IE11 PCs - but a friend gets through OK.
    So it's not the site, nor IE8.
    My Win7 laptop suggested that I run HP Network Check, which I did. It's fixed a problem - it had to "purge my DNS Resolver cache" - sounds painful - but says I must reset my router.
    Does anyone else with a Home Hub 3 have to reset it weekly? What affects the frequency of resetting?
    Thanks in anticipation!

    I use an HH3, supplied when I joined BT Internet from Virgin due to appalling service from them. 
    When using a Netgear or TP-Link router/modem our connection was always 'breaking' and being reset - almost every night!  With the HH3 that doesn't happen so often and the throughput is generally better (despite a slower sync speed being reported!). Reverting to the other router/modems gives the same unreliable service as before.  Even trying a different Billion router/modem gives the same old interuptions, etc.  So I suspect the way the BT Internet system is set up favours the HH range but they appear to have fundemental design problems too.
    As for how often I have to do a soft restart, or power cycle, depends on how the exchange equipment decides to reset the connection. It can go for a couple of weeks without a change but then decide to make changes most nights (during the night and not the daytime for some strange reason). When it makes the changes, it always reverts to a much slower sync and throughput with often enormously high noise margins (the ideal for us is about 8 dB but it usually resets to 15-18 dB!). So then a reset is called for and afterwards we generally get fair to good results but rarely anything outstanding. Our line length is a serious limiting factor and we'd love to be able to get ADSL2+ but that is not planned and we'll have to wait for the BDUK Intervention plans to find out if we'll ever get fibre in the area.
    And as for 'technical support', as an experienced electronics engineer (now retired after 50 years in the business) I have to cry!  They don't know what they are talking about at all, but read from a script that does not cater for many actual problems. 

  • How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
    To unlock this limitation, do the following:
    1) Type “about:config” at the address bar
    2) Search for “services.sync.syncInterval”
    3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
    4) Close and restart Firefox
    The Sync action will now trigger at the interval you just set.
    from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

  • How often reset Apple tv-2?

    Have had ATV-2 for about a week and all's well for the most part. But I found yesterday that my photo streaming from my iMac was very sluggish. Thought it was my network, but I decided to do a Reset on the ATV. That fixed the problem. I use a Time Capsule (500G) for my router.
    Question: Under what circumstances and how often do y'all find you need to do a Reset?
    Thanks,
    picman

    The only time I've ever had to perform an unscheduled reset my Apple TV 2, was to enable netflix for the first time.

  • How do I reset preferences?

    For some reason I cannot download from firefox. I pasted the error message in the trouble shooting window below
    == This happened ==
    Not sure how often
    == Uncertain maybe a month ago.

    See this KB article:
    [http://support.mozilla.com/en-US/kb/Managing+file+types]

  • How often to repair permissions?

    How often should one need to repair permissions?
    It seems that I need to do so too frequently in order to repair sluggish or erratic performance.
    Adam

    Permissions shouldn't have to be repaired unless there is a permissions problem. Are you getting permissions messages when you open files/apps?
    Slow, erratic behavior doesn't sound like a permissions problem. I'm not sure why RP is helping this.
    How much RAM do you have installed?
    How often and after how long does this happen?
    Please post your Console > system.log from around the time of the last slowdown/permissions repair. Maybe we can find something there. Depending on how often this happens, you may be able to test it bystarting up in Safe Mode  (It will take more time to startup because it runs a directory check.)
    If your system functions correctly that way, go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If not go to/Users/yourname/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving/Users/yourname/Library/Fonts to your desktop.

  • How often does Mail download from a POP account?

    I'm trying to help a friend, but I'm not that Apple-savvy. I know in Windows mail clients, there are settings to adjust how often mail is downloaded from a POP server, but I couldn't find any such setting in my friend's MacBook mail application. He is running 10.4.11. Does it only download each time you launch the mail application or click the "Get Mail" button? Does it download on some pre-set schedule that can't be changed? Any help is appreciated. Thanks.

    "but I couldn't find any such setting in my friend's MacBook mail application."
    I believe the equivalent setting is:
    Mail>Preferences>General>*Check for new mail.*
    "Does it download on some pre-set schedule that can't be changed?"
    You can change the times for the +"Check for new mail"+ setting manually or use the computer setting.
    !http://i45.tinypic.com/jl0z95.jpg!

  • How Often to Restart an ECC 6.0 Instance?

    Hi,
    I have notice that after a few weeks the buffers start swapping a lot in ST02 in our production instance application servers.  The only way I know to fix this is to restart the instance.  1. Is there a way to clear/defragment the buffers without restarting?  2. How often should the instances be restarted?  Our plants run 24x7 so downtime is hard to come by.  
    Our buffer parameters are set according to SAP Earlywatch recommendations.
    Thank you,
    Shelby

    Hi,
    /$sync it will reset the buffer as well as number ranges too. so i recomend /$TAB instead of /$Sync.
    /$TAB will just reset the buffer without restarting the system.
    For more information click [Buffers|http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/3a6e98505211d189550000e829fbbd/frameset.htm]
    With Regards,
    Krishna.

  • How often can I swap a Creative Cloud activation between more than two systems?

    I have three computers - one at work (desktop) and two at home (desktop and laptop). My Adobe CC account is currently installed on two of them (desktop at work, desktop at home) but I would like to swap one of those activations as often as twice a week when I need to take my laptop on the go. i.e. I would activate my laptop and deactivate my home desktop for about 24 hours and then re-deactivate/re-activate..
    How often can I do that activate/deactivate without breaking the EULA?

    Hi Midimid,
    Welcome back to Adobe Forum,
    In Creative Cloud, you sign in to activate your software.
    Make sure that your computer is connected to the Internet.
    Start the application.
    Choose Help > Sign In. (If this option is dimmed, you've already signed in and don't need to activate your software.)
    Log in with your Adobe ID (usually your email address) to activate your subscription. If you don’t have an Adobe ID, you see an option to create one.
    Note: If Creative Cloud prompts you to enter a serial number after signing in, see Creative Cloud applications ask for serial number.
    Signing out of one Creative Cloud application deactivates all Creative Cloud applications associated with your Adobe ID on that computer.
    Make sure that your computer is connected to the Internet.
    Start the application.
    Choose Help > Sign Out (Your Adobe ID).
    Click Sign Out.
        Alternately, you can sign out from all Creative Cloud applications on your machine using the Creative Cloud app for desktop. 
    Open the Creative Cloud Desktop App.
    Choose the Settings icon.
    Choose Preferences.
    Choose Account.
    Choose Sign Out from Creative Cloud.
    Running into a problem? See Common Deactivation Issues.
    Please check the details in http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ho w-to
    However I would request you to go for Creative Cloud for Team in which you can add the number of seats & install it on computers required.
    Hope this information helps you, please mark the post if the issue is addressed, we value your opinion.
    Kind Regards,
    Rajshree

  • Reset preferences on next launch

    How do I reset my preferences? My "add glow" is giving me a dark grey, grainy effect instead of the usual glow effect. I tried ctrl, shift and alt but nothing comes up and when I go to my general preferences the "reset preferences on next launch" button is not there.
    Please help 

    Try the following steps:
    1. Launch Welcome Screen
    2. Press Ctrl+Alt+Shift (Command+Option+Shift on Mac). Click on big Editor button.
    3. It will launch a dialog to reset preferences
    See if this works for you.

  • TS2446 my account was disabled because i could not remember my security question awnsers... how do i fix this and reset my awnsers

    how do i fix this?

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
    Go to: Apple Express Lane;
    Under Product Categories choose iTunes;
    Then choose iTunes Store;
    Then choose Account Management;
    Now choose iTunes Store Security and answer the bullet questions, then click Continue;
    Sign in with your Apple ID and press Continue;
    Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
    Click Send/Continue.
    You should get a response within 24 hours by email.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
    on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
    Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
    sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
    At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • Remove cookies?  Why and how often?

    Remove Cookies?  Why and how often?  Option seems to be different now that I'm running Mountain Lion.

    The only reason to remove Cookies is if your concerned about being tracked and your privacy. It's futile to keep removing Cookies from sites you frequently visit.
    In your browser settings, you should set the cookie preferences to block cookies from third parties and advertisers. In Safari you do that in Preferences/Privacy.
    In Safari you can also set Preferences/Privacy to ask websites not to track me
    If you delete the apple.com cookie, you will need to constantly sign into iTunes because the apple.com cookie contains the iTunes username and password.

  • Indesign resetting preference

    Hi everyone, every time a restart my mac, indeisgn resets preferences, so dynamic spelling, measurements etc are all reverted to default.
    However my panels layout remains.
    Can anyone advise how I can stop this happening? (Mountain lion 10.8.2, aka the Turd)
    Cheers

    Actually I did install OSX Server because I have been having no end of issues with time machine, server corrects this issue.
    PErhaps this has caused issues? To be honest the whole system 'feels' unstable if you know what I mean, aperture keeps falling over and it goes on a spotlight index a lot!

Maybe you are looking for

  • Two Fundamental questions on UPGRADE/Patch

    Question 1. If i upgrade from 10.2.0.1.0 to 10.2.0.3.0, should i call this as an Upgrade or Patching? Question 2. If i upgrade(or patch) from 10.2.0.1.0 to 10.2.0.3.0, can i reverse theses changes and go back to 10.2.0.1.0?

  • Java Web Start and DNS with multiple IPs fails

    We have a number of servers that deploy a Web Start application. We have a DNS entry with the 3 IPs of the servers (e.g. nslookup webstart.mydomain.com returns 3 different IPs). This is fine for a browser (running a packet capture program e.g. Wiresh

  • IPad : impossible to update or sync the Apps

    Hi, Ever since I updated (difficultly, had to try 13 times !) to the new Operating System, I lost the "App" logo on my iPad, and I can't update, sync or add new (downloaded) apps to the iPad. In iTunes (the latest version) the "app" part is lightly g

  • 0SD_C03 transfer rule and update rules do not exist in BI Content

    I am working on SAP BI 7.0 support level 16 and BI Content 703 support level 9. I am not finding these objects in BI Content for the Sales Overview Infocube  0SD_C03: Update Rules do not exist for 2LIS_11_VAKON, 2LIS_11_VASCL, 2LIS_11_VASTH, 2LIS_11_

  • Is there a way to remove the autoformatting of the "Places" slideshow theme?

    The Places slideshow theme in Aperture is a great one for what I want to do; however, it automatically formats the slides where it will place two or three images per slide.  I'd like to have only one image per slide.  Is there a way to remove or adju