How print address in Single line in Address window in Smartform

Hi All,
How print address in Single line in Address window in Smartform?
Thanks in advance.
Message was edited by: Vipin Nagpal

Hi Vipin,
if u r defining the variables for the address manually,
then u can define all the fileds in a single line in the edit mode of address window u will get the address in the single line only
if u r using the standard format
modify the address format by using the user exit:
"EXIT_SAPLSADR_001"
Check OSS Note : 454987
or in the least case u can use the address window setting to change the format and lines
May be this will help you.
Regards,
Naveen

Similar Messages

How to delete the horiz line of addresses beneath the address bar

How to delete the horiz line of addresses beneath the address window. They are not affected by the "delete recent sites" tool.

Do you mean the tab bar?
See [[Tabbed browsing]]

WLC - How to block a single client MAC address?

Hi Sir,
On a WLC (software version 4.1.185.0), how to block a single client MAC address?
I thought of using the SECURITY -> Disabled Clients. Is it right?
There are currently 250 users connected to the WLC. MAC Filtering is not a scalable solution because as I understand it, we have to specify all the legitimate MAC addresses in the local database.
Thank you.
B.Rgds,
Lim TS

Hi Lim,
As you have discovered, the Mac filtering on the WLC is an Allow (based on Mac address) rather than what you need which is a Deny (based on Mac address). I have not tried this feature but I think you are on the right track in using the Exclusion List (Blacklist) feature. Have a look;
Use SECURITY > AAA > Disabled Client then click New or MONITOR > Clients then click Disable to navigate to this page.
This page allows you to manually Exclusion List (blacklist) a client by MAC address.
Add the MAC Address and an optional Client Description for the client to be disabled.
Note When you enter a client MAC address to be disabled, the Operating System checks that the MAC address is not one of the known Local Net clients ( Local Net Users), Authorized clients ( MAC Filtering), or Local Management users ( Local Management Users) MAC addresses. If the entered MAC address is on one of these three lists, the Operating System does not allow the MAC address to be manually disabled.
Hope this helps! Let us know.
Rob

How to stop auto from-feed on a dot matrix printer for printing only a single line of data at a frequency of 30 seconds

Hello friends
In a particular application, it is required to print a single line of data on a dot matrix printer (continuous sheets) at a frequency of 30 seconds. That is printing is to be carried out line-by-line on the same form without a form feed.
We are facing a problem of a form feed after printing of each line. Kindly help me to solve this problem of auto form-feed. How to continuously print at a regular interval without from-feeding.
Shahid Baig

Is this printer connected to a network?
You may need to look at the printer manual to see if there is a setting for a form feed. I remember when we had a dot matrix printer on the network about 12 years ago, there would be a network timeout setting of something like 30 seconds. So if you didn't continue to send data, the network will end the print job and send the file to the printer which would auto form feed at the end. Many of our basic programs had to be rewritten because they would do an LPRINT periodically, if you took along time progressing through the inputs, you would easily hit the 30 second timeout. So all the programs had to be rewritten to save the data to be printed to a file, and only once you execute a print command, it would read the file back in and Lprint it (or a Print#1) to the LPT port.
Since the printer was on the network, and basic could only print to LPT's, we had to use a net command to capture the LPT1 port and direct it to the network queue.
I don't remember all the details, but those are the bits and pieces I do remember. I think the answer to your problem lies in there somewhere.
Namely:
1. Printer setting to auto form feed.
2. Network setting that closes print job after timeout period.

DBMS_Output.put_line doesn't print in one single line

Hi People,
I am using 'DBMS_Output.put_line' in my procedure for the output. Here's the code:
DBMS_OUTPUT.put_line('LOGIT_T. Detail records for act:'||v_count_act||',Detail records for Bal:'||v_count_bal||',Updated records for act:'||v_updat_act||',Updated records for bal:'||v_updat_bal||',Total records for act:'||v_count_act||',Total records for Bal:'||v_count_bal);
When the procedure runs, it prints the output as shown below:
LOGIT_T. Detail records for act:619,Detail records for Bal:324,Updated records
for act:0,Updated records for bal:0,Total records for act:693,Total records for
Bal:410
As a result, when inserting this whole line into table, it only inserts the following text. Hence, ignores the rest of the text (table field width is 2000 bytes):
LOGIT_T. Detail records for act:619,Detail records for Bal:324,Updated records
Looks like, it is automatically wrapping the text to the next line. While I want the above output in a single line as shown below and to be inserted into my table the whole text:
LOGIT_T. Detail records for act:619,Detail records for Bal:324,Updated records for act:0,Updated records for bal:0,Total records for act:693,Total records for Bal:410
Any idea how to achieve this? Any parameter or setting I am missing here?
Hope I made sense above and clearly described my situation.
Thanks in advance guys!

in sqlplus, you can use set linesize:
SQL> set serverout on
SQL> set linesize 10
SQL> exec dbms_output.put_line('This is a line of text that exceeds 10 characters');
This is a
line of
text that
exceeds 10
characters
PL/SQL procedure successfully completed.
SQL> set linesize 132
SQL> exec dbms_output.put_line('This is a line of text that exceeds 10 characters');
This is a line of text that exceeds 10 characters
PL/SQL procedure successfully completed.

How to handle the single line selection in table control

Hi All,
 I am facing a problem in the table control of modulepool program.
 I have line selection as "Single" in the table control attributes. But when i am selecting a line in the table control as long as it is in the same page,the line selection is single but when i am selecting the line in the next page,the previous selection is not deselected. So I am seeing two selection for "Single line selector" attribute.
 Could any one help me solve this problem?
Thanks & Regards,
S.Lakshmi

Hi Lakshmi,
Just Go to Table control , click on it , you can see the attributes screen , there you can see option for
Line selection
none
multiple selection
single selection
check the radio button single selection.
that will solve your problem..
regards
vijay

How to create a single line textbox with up-down button?

Hello,
I mean for example is a text box for percentage. You can type in the value, or click the up or down button to get the value you desire. I tried attaching a small-sized vertical JScrollBar to a JTextField, but it is getting complicated that I need 2 different listeners(AdjustmentListener & FocusListener) for this.
If you have done this before, or maybe you have some suggestions, I would appreciate the help. These are some conditions that the percent text box needs:
- a click on up/down button increase/decrease the value by 1.
- the user types in a value more than 100 or less than 0 and press one of the button(up/down), setText to 100 or 0.
- the user types in a value in range, increase/decrease that value when up/down button is clicked.
Thank you for your time.

That's called a "spinner". I understand that it's a standard component in SDK 1.4, but I haven't looked at that myself, it's still in its beta stages. If you go to this page:
http://www.toedter.com/en/jcalendar.html
you will see an example (JSpinField), and you can download it for your own use.

EMPTY LINE IN MAIN WINDOW OF SMARTFORM

Hi All!
I am designing a smartform in which i had included several windows.I have a query on the main window.
My main window is displaying several line items through table one by one.Now my requirement is to put one blank line in between every line item i.e. for every line item printed in the main window through a table I want a blank line in between.
Please suggest me how to achieve this..
Regards
Praneeth

Hi Praneeth,
I will tell you one simple technique to display. You dont have to do anything in the smartform at all while displaying.
The value in the internal table will be obtained by some method in your code. So while adding a record or appending a record to your internal table just append an empty line to your internal table. So while displaying the smartform will display all the records in your internal table including the blank lines. Hope this solves your issue.
LOOP AT i_vbak.
MOVE i_vbak-vbeln TO i_output-vbeln.
APPEND i_output.
APPEND INITIAL LINE TO i_output.
CLEAR i_eanl.
ENDLOOP.
Reward if helpful.
Regards,
Tushar
Message was edited by: Tushar Marshall Dass

Missing one line in FOOTER window in SMARTFORMS

hi experts,
In the footer one line is missing in the print preview for ME23N Tcode.
what should be the problem. Actually in the Footer window, in the template i have mentioned the 25,50 CM width and 19,00 MM height. I have divided the width into 2 columns, 1st column i have taken 5,00 CM and 2nd column 20,50 CM. In the 2nd column I cannot able to see last line.
Please let me know how to solve my problem.
Regards
Vinay

Hi Vinay,
I hope its not a problem with the width, can you check height.
Regards,
Dj
reward for all useful answers.

Output of select query in a single line

hi,
I want to know how to get the each row in a table to be printed in a single line.. Each row in the table will be of 1500 characters length..
Thanks

Is there any limit to the value that we can specify
for linesize.. I read somewhere that the max value is
dependent on systemIn [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm#SQPUG085]the documentation, they don't talk about a maximum, but I saw there is one:
SQL> set linesize 1500
SQL> set linesize 32767
SQL> set linesize 32768
SP2-0267: linesize optie 32768 ligt buiten toegestane bereik (1 t/m 32767).Regards,
Rob.

Best way to handle single line Customer and Address Data

Hi, We have customer data in a single line means name, address everything is in a single line. I am now suppose to cleanse this data using Data Quality. Now my question is how to parse this data. Normally I have dealt with multiple line or address data which I can map to input fields of the Address cleanse transforms. In this case, Shall I just map that single field to "Address_line" of the Address cleanse transform? It should be able to parse or shall I parse all the fields using some function in Query transform and then feed into Address Cleanse transform?
Thanks,

Hi, We have customer data in a single line means name, address everything is in a single line. I am now suppose to cleanse this data using Data Quality. Now my question is how to parse this data. Normally I have dealt with multiple line or address data which I can map to input fields of the Address cleanse transforms. In this case, Shall I just map that single field to "Address_line" of the Address cleanse transform? It should be able to parse or shall I parse all the fields using some function in Query transform and then feed into Address Cleanse transform?
Thanks,

Smartform address in a single line

I am having a window where I have address as 3 lines..but I want to keep in the footer in a single line with comma.
I am using the address node's for it.
do you have any idea how to do it.

Hi mark,
Using ADDRESS NODE the text cannot not be displayed as per your requirement.If you want to display the address in a single line with comma then use TEXT NODE.
Regards,
Sravanthi

How to single out email addresses in a text

Gurus,
How can I get email addresses in a single text?
for example if given
'"has, Fez" <[email protected]>,"Heidinger, Matk" <[email protected]>,'
how can I get just
[email protected]???
[email protected]
??? it comes in a single line but I need to have it in a column so
the column shows a list of unique email addresses
ebro

Assuming consistent format you can use this
declare @emailist varchar(1000)='has, Fez" <[email protected]>,"Heidinger, Matk" <[email protected]>,'
select STUFF(Val,1,CHARINDEX('<',Val+'<'),'')
FROM dbo.ParseValues(@emailist,'>,')
WHERE LTRIM(STUFF(Val,1,CHARINDEX('<',Val+'<'),''))> ''
See udf here
http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

Howdy there johnzcarp,
As I understand it you want to have more than 1 email address under your Apple ID. You can have what are called Alternate Email addresses associated with your Apple ID and this article will help you get those setup:
Manage your Apple ID primary, rescue, alternate, and notification email addresses
Alternate email address
You can add one or more alternate email addresses for use with Apple services such as Game Center, FaceTime, Find My Friends, iMessage, and OS X notifications.
Go to My Apple ID (appleid.apple.com).
Select “Manage your Apple ID” and sign in.
Add an alternate address:
Select Add Email Address, then enter your alternate address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Edit an alternate address:
Select Edit next to the address, then enter the new address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Delete an alternate address: Select Delete next to the address.
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I use a previous email address with my printer?

How do I use a previous email address with my printer? I reset my printer and want to use the same email address as before.Thanks

At this time the printer's email address will not be available for for re-use for 6 months. This is a security measure once an email has been disabled. After that time, one can go into their account and then change the customized email address for the printer.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How print address in Single line in Address window in Smartform

Similar Messages

Maybe you are looking for