How receive all the changes in a displayed table using internal table in WD
The same thing can be done in ordinaty Dyn Pro as
PAI
Loop at <It>
Module get_details [ Accessing the screen structure and modify the internal table with the current index of the table control]
endloop
First say who your draw your data in Table..
or before drawing the data create a session and than
dont use java Script you can use jsp <% %>
............
Similar Messages
-
Submititng the program to another program using internal table values
Hi All,
How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
thanks
rajHi All,
Thank you very much for your inputs.
i am facing another issue:
For each 10,000 records it should trigger a job (we are trying to call a program) were the validation will be done only through the other program.
please find the code mentioned below :
TABLES : but000.
DATA: int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
data released like BTCH0000-CHAR1.
DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
jobname LIKE tbtcjob-jobname, " job name.
startdate LIKE tbtcjob-sdlstrtdt, " Start-time
starttime LIKE tbtcjob-sdlstrttm, " window specs.
laststartdate LIKE tbtcjob-laststrtdt,
laststarttime LIKE tbtcjob-laststrttm,
job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
DATA : l1 TYPE i,
b_size TYPE i,
b_cursor TYPE cursor.
INITIALIZATION.
b_size = 5000.
START-OF-SELECTION.
OPEN CURSOR WITH HOLD b_cursor
FOR
SELECT *
FROM but000
WHERE bpkind = 'AA'.
IF sy-subrc = 0.
DO.
FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
PACKAGE SIZE b_size.
Note : here in this point we are getting a dump for the second job trigger.
IF sy-subrc = 0.
CLEAR jobname.
CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
export int_bp to memory id 'ABC'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobnumber.
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = sy-uname
jobname = jobname
jobcount = jobnumber
report = 'YTEST_RRR'.
variant = lv_variant.
SUBMIT ytest_rrr
VIA JOB jobname NUMBER jobnumber
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_periodic = 'X'
jobcount = jobnumber
jobname = jobname
strtimmed = 'X'
IMPORTING
job_was_released = released
else.
EXIT.
ENDIF.
ENDDO.
calling program :
REPORT YTEST_RRR .
data itab1 like but000 occurs 0 with header line.
data l type i.
import itab1 from memory id 'ABC' .
describe table itab1 lines l.
free memory id 'ABC'.
write:/ 'total records are:', l.
Please give your suggestion why its going for dump in the second iteration.
thanks in advance. -
Extracting the result of a query into a internal table
Hi,
Does anyone knows or have an idea how to extract the result of a query into a internal table, is there a function module or BAPI?
Thanks in advance,
CKSo then normally I would use a statment like:
IFunctionTemplate ftemplate = repository.getFunctionTemplate("<b>BAPI_SALESORDER_GETLIST</b>");
to call a particluar function, but I tried using
IFunctionTemplate ftemplate = repository.getFunctionTemplate("<b>BAPI_MDDATAPROVIDERBW_GETCATALOGS</b>");
and it did not seem to work. I also tried -
IFunctionTemplate ftemplate = repository.getFunctionTemplate("<b>MDDataProviderBW.GetCatalogs</b>");
How do I format the function?
Thanks
Paul -
With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
Thanks
RozAre you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
How to find out what are all the change pointers assoicated for an idoc ??
Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
VarmaVerma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps.. -
How to find all the changes management details (thr DB tables or FMs)
Hi Experts,
Could anyone please tell me how to get all the Change management details.
I mean are there any database tables or FM through which I can get all the Changes Management(CHARM) details.
like status,priority,texts,descriptions etc...
I need them for an interface....
Thanks
Yogesh GuptaHi,
Yet another request to use my crystal ball.
We had one pc which is having oracle 9i enterprise manager configured(windows 2000) only to connect the db.
This remembers me of the Gospel of St. Luke, chapter 2, where it is stated,
'and they found the child in the manger'.
This resulted a Jewish theologian to remark: 'The manger? Well, so that must have been their own manger'
So what does 'the' db mean? The Linux one? Or a separate on Win2000?
It is quite possible to manage a Linux database using OEM on Win2000, with OMS on Win2000.
'But our server is not having enterprise manager'. Yet another riddle. Which server? There seem to be at least two.
1 Now if I drop these tables, will I be able to connect to our database using the windows2k pc through Enterprise Manager?
Yes, but only in standalone mode, and you can't use OEM alerts, and jobs anymore. You would be better off using Sqldeveloper, as OEM Sql worksheet is a nightmare.
2 That is your decision.
3
oemctl ping oms
will check whether you have an Oracle Management Server running.
You already seem to have the Enterprise Manager Repository, so you must have OMS running somewhere. (Why install the repository, if you don't use it)
Sybrand Bakker
Senior Oracle DBA -
Now that my husband has an iPhone5, he receives all the messages sent to me, and I receive his. Do I have a setting wrong? How can we keep our messages private?
Go into the settings app.
Settings > Messages > Send and Receive from
Set each phone to send and receive only from the specific phone number assigned to the phone and the specifics one number of each user.
If you each are using the same App,e ID I suggest one of you getting a different ID to keep all your stuff separate. I also recommend that each of you have different email addresses. -
HT5557 how do i stop receiving all the free ibooks?
how do i stop receiving all the free ibooks?
Hi Roger. Thanks for that. Have amended the action - "Stop email notifications". Will wait with optimism!!
Regards
John -
How to find the Changes like functional location category
Hi Experts,
Can anyone guide me as to how to get the changes in Func loc category made for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
Faster response will be highly appreciated and rewarded.
Regards,
ManishHi,
Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
Regards,
Maheswaran. -
HOW TO SEE THE JOB NUMBER IN DISPLAY MODE?
Hi all,
I am new to apo and how to see the job number in display mode?
i can see a couple of trns for create, delete and change and not to display it?
Can anyone tell me abt it?
Thanks
poojaHi Pooja,
I assume your query is on identifying job ID in display mode
To find out that, goto sm37, execute it and double click on
the job, and then click on job details, you will get the
job id (job number) in display mode
Regards
R. Senthil Mareeswaran. -
How to set the number of records displayed at run time
Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!
Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica -
How to restrict the change access in CRM for OLTP orders
Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
SuneelHi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards. -
How to get the Change node in Production Server!!!!!
Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S -
Hi,
i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
now i have placed two buttons there.
one is Apply and second is Cancel.
when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
can anybody help me how this can be done and what code should i write in action performed method
thanks in advance
plz replythanx.
one more thing
In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
1) Now how can i restrict user to create one more internal frame unless first one is closed.
2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
3) and how can pass those parameters value to my main frame from where i m calling internal frame
Plz reply
Edited by: neel007 on Mar 11, 2009 8:02 PM -
How to know the changes made to Quotations & Sales orders?
Hi all
I want to know how we can have the records of changes and alterations that are made in quotations and Sales orders. For example, once the quotation is created and saved, there must have been many alterations either on pricing or in terms & conditions based on the final negotiations with the customer. Please let me know how do we record the changes.Hi,
what ashish told is exactly correct.You just go to the Environment-changes and execute,it will shows all the changes made for that order like pricing,payment terms etc.
Regards,
Hari.
Maybe you are looking for
-
Description Faulting Application Path: C:\Program Files\Safari\Safari.exe Problem signature Problem Event Name: APPCRASH Application Name: Safari.exe Application Version: 5.34.57.2 Application Timestamp: 4f982b5e Fault Module Name:
-
Can't use Mail in Applications
I'm not sure I'm even phrasing this correctly - I am an absolute Luddite regarding computer terminology/usage. I can use an email account by accessing it via Explorer, but when I send or receive attached Quark files they are corrupted, although Photo
-
Could not able to show a scalar value in Page Header/Group Header of the re
Hi, I could not able to show a scalar value in Page Header/Group Header of the report which is returned from Sub-report. But I am able to display it in both Group Footer and Page Footer. I used shared variable in formula filed of both main and sub re
-
Nokia E71: WhatsApp shows message as we are runnin...
Hello I was using Whatapp one version earlier to 2.11.398 a week back with out any issues. But application stopped working with error below. "This version of WhatApp is too old and no longer functions. Please upgrade to the latest version". Then I re
-
How to start BusinessObjects Software Inventory Tool?
Hi there, I've got a BusinessObjects XI 3.1 Installation on Linux and I'm searching the Software Inventory Tool. But I don't find the directory.. Thanks and best regards, Max