How RONA (CallsRONAToHalf) Calculated in ICM reports

Dear All,
Please any one advise me how RONA calls Calculated in the ICM reports.
As per my understanding Number of calls that have been Redirected On NoAnswer in the half-hour interval which is routed to agent phone.
apart from this agent ring no answer, anywhere else the RONA Calculated (Like queue to IVR or sending the call to IVR and queuing back to skill group).
We have ICM 7.2.5 with IPIVR. when we pull the Call type reports, we can see CallsRONAToHalf shows 20 to 25 calls per day in per call type.When we manually monitoring the agnets in the floor and agents are not missing single calls. but reports show RONA 20 to 25 per call type.
Please advise which are the condition RONA calls Calculated?
Thanks & Regards,
Naveen.S

I would dig into the database of ICM and UCM to get down to the root of the problem.
1. In the TCD look for a call with the RONA call disosition and find out which agent it went to.
2. In UCM log match that the call was actually answered by the agent.
If you do the above and find the information that supports that there was no RONA, then you need to talk to Cisco you might have yourself a bug. However, if you can't find the call in the UCM logs, then more than likely your agents are doing something or one of your agents is doing something you're missing. I've never had problems with RONA, it has always been spot on when reporting an agent letting the call roll by.
david

Similar Messages

How to give the calculation in Finacial report templates asper indian local

Dear experts
help me, how to give calculation in Financail report Templates in SAP b1 for calculating Gross profit and Netprofit seperately. I am facing some error while giving formula in financial report templates.
Thanks
Regards

Hi Mathiladath,
Try this,
->> Financials. -> Financial Report Templates in that follow this steps.
1.Report. -> Choose (Profit and Loss)
2.Template.-> Define New -> Give the name for template.
3.And click the Generate Chart of account button in bottom right.
4.put the Tick mark in Subtotal Check box
5.now u can see Formula button (Click and Open the Formula Definition window and put the Formula)
using this button create appropriate formula for your requirement(ask help your A/C department)
6.Chose this template in P/L.
Regards,
Madhan.

GRCT    HOW TO ADD Z TABLES IN REPORT PAINTER

Hi Gurus
Could you please send me information about how to activate z tables in report painter ?   someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Moreno

hi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01   (Plan)
Version 0   (Actuals)
Valuation 0   (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit

How to display calculated matrix columns in a graph?

Hi,
I am working in VisualStudio 2010 hitting SQL Server 2012 to build SSRS reports.
I have a need to graph year over year percentage growth as derived from two SSRS matrix columns. Everything is working except that the chart displays only one value for each year series, rather than displaying the correct percentages for each audience
for each of the two years.
The values in the chart series properties are called with the expression: =ReportItems!YoYGrowthPercent2014.Value (or =ReportItems!YoYGrowthPercent2014.Value, respectively), where "YoYGrowthPercent2014" is the name of the detail cell holding
the expression to calculate the growth percentage at the audience level in the matrix.
It looks like it should work yet the results are incorrect. I've read several hundred articles and posts at this point and do not have an answer.
Is there any way to do this? It seems like it should be so simple, and yet...
Thank you!
~Khrys.

I can reproduce your issue. If you toggle open Audience P I think you will find the very last value for the last Category and the last Product_Group will be around 15% for Growth 2014 and around 23% for Growth 2015. The chart series expression
is choosing the last value for ReportItems!YoYGrowthPercentage as it doesn't know how to attribute that ReportItem to the Audience matrix. If you want a chart to display only the percentage for Audience, I suggest that you have a separate data
source with the values for GrowthPercentage for only the Audiences, and make that the data source for your chart. Also, I would make the growth figures in your matrix also a matrix by doing the percentage calculation directly in the table. You would pull in
the value for this year and the value for last year into your data set, and then do the calculation within the report as follows:
=SUM(Fields!Value.Value)/Sum(Fields!LastYearValue.Value)-1
Create a second Column Group adjacent after, also by year. Your query could look something like this, depending on how your tables are structured:
SELECT a.Audience, a.Category, a.ProductGroup, a.Year, a.Value, b.Year as LastYear, ISNULL(b.Value,0) as LastYearValue
FROM YoYGrowth a LEFT OUTER JOIN
YoYGrowth b ON a.Audience = b.Audience and a.Category= b.Category and a.ProductGroup = b.ProductGroup
AND a.Year-1 = b.Year
Hope it helps. Cheers,
Martina White

How Achieve timedseries calculations with out using AGO And ToDate function

Hi,,
1)
How Achieve timedseries calculations with out using AGO And ToDate functionion
this question asking in interview ..is it possible..?
if yes please response as soon as possible..
2) i have 2 cloumns Product and value...
client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
how to achive this ?
thanks,
raj

Consider yor first question:
1. Yes, we can create timeseries measures without using AGO and TODATE
1. Create ALIAS of fact tabe in the physical layer
2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
4.Keep the mapping of the columns from the ALIAS table as its is
5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
See if this helps you

How is YTD calculated in bex ?

we have a requirement to calculate YTD for revenue in a report. Just want to understand if YTD is always the current year restricted to KF or we need to consider the value from the user like 0fiscper and adjust YTD, as per the user input. I mean for example if user enter input 002.2013, then the YTD will have 2013 value or still 2014 value because YTD is current year to date.
My reporting requirement is as below. red are colmns.
customer YTD revenue Feb 2013 ( user input value- revnue will be fetch based on user input).
But YTD will be always for current year right ? Does it depend on the user requirement ? Should I ask user or its generic, Please confirm.
Thanks
DR

The reason I put this thread is to find out how is YTD calculated normally in a report. Will it be always the current year data to be displayed or it depends on the requirement. Hope you would have handled YTD in your reports, can you please clarify.
Anyways' thanks a lot Anshu and Suman. You guys are experts and always provide prompt respone to me. and provide different approaches even on weekends. I appreciate it. Have awarded you guys full points. I will try your approach on monday will post you questions. I got the clear picture to display text for column heading and restrict 0fiscper for the data column. Will try YTD after you confirm or more inputs from the user.
Thank You once again.
DR

Mathematics calculation in Webi Report using "For Each"

Hi All,
I am using BOXI R3.0, I am stuck in webi calculation for one report report tab. I have 2 tab in one report, one is summary and other is Detail in same report. In Detail tab the data looks like as below:
DataSet 1:
DNo.-Date-Hours-Vol-Pri---Tot(Vol*Pri)
10 -1/12- 01:00---10 ---10 ---100
10 -1/12- 02:00---20 ---50 ---1000
10 -1/12- 03:00---30 ---30 ---900
Sum: 2000
Now the above is my detail reprot which gave me data by hour, now in summary i removed the hour column then data looks like below:
Dataset 2:
DNo.-Date-Vol----Tot(Vol*Pri)
10 -1/12- 60 -
1800
This is because "Vol" measure is sum in universe and Pri is Average.
This gave me wrong data so How i calculate Tot for Sumarry tab such that it will give me below result.
Dataset:
DNo.-Date-Vol---Tot(Vol*Pri)
10 -1/12- 60 ---2000
Thanks for the help in advance.
Thanks,
Nimesh.

Hi Nimesh,
I think you need to wrap a sum around the function and use an input context.
=(Sum([Pri] In ([DNo]; [Date]; [Year])))*[Vol]
This will sum the average values down at the year level and multiply it by vol, even though year is not on the table.
Let me know how you get on
Regards
Alan

Create calculation in webi report

Hi
I need calculate in a report like below.
For example report as below.
Region          revenue
North             200
South            390
Total
east               100
west                 50
Total
Grand Total
Reg above i have two questions
1)How can i do the calculation for this report?
2)I need to add any free hand cells for TOTAL rows in report?
Please advide.
Best Regards,
Abhii

Hi Abhi,
Simple Way : Break the table by Region and apply Sum Aggregation on qty. you will have a display like this
Region    revenue
North      200
Sum        200
South     390
Sum       390
east    100
Sum     100
west     50
Sum     50
Sum   740 ( Grand Total)
Other Way: Create a new report variable ,apply break on Region_num & use Sum Aggregation on Qty.
Output will be like this
Region_num    Region     Revenue
Region 1         North        200
..............South       390
Sum............... 590
Region 2          East         100
..............West          50
Sum...............150
Sum................740 (Grand Total)
Regards
Sunil
Edited by: sunilkumar.k on Mar 5, 2012 4:21 AM

How "Assigned" value calculated for WBS in CJ30?

Dear all,
I have got a problem with the Assigned value in CJ30. The problem is that the value in column "Assigned" of CJ30 disappeared after I settled the cost of the WBS to another WBS which has no budget control activated (no budget profile assigned). As I know, the Assigned value won't be changed if the WBS is settled to an object with no budget control, for example settle the WBS to a cost center, or a assets. In my case, although the settlment was done between two WBS, but I had removed the budget profile when created the receiver project, which means the receiver WBS has no budget control activated. However, after settlement, the assigned value of the sender WBS disappeared. But if I settle the cost to a cost center or assets, I can see the assigned value still shown on the sender WBS in CJ30.
Can anybody here tell me why this happen? or is this a bug of SAP?
Thank you very much in advance.
Best regards,
Brook

I can reproduce your issue. If you toggle open Audience P I think you will find the very last value for the last Category and the last Product_Group will be around 15% for Growth 2014 and around 23% for Growth 2015. The chart series expression
is choosing the last value for ReportItems!YoYGrowthPercentage as it doesn't know how to attribute that ReportItem to the Audience matrix. If you want a chart to display only the percentage for Audience, I suggest that you have a separate data
source with the values for GrowthPercentage for only the Audiences, and make that the data source for your chart. Also, I would make the growth figures in your matrix also a matrix by doing the percentage calculation directly in the table. You would pull in
the value for this year and the value for last year into your data set, and then do the calculation within the report as follows:
=SUM(Fields!Value.Value)/Sum(Fields!LastYearValue.Value)-1
Create a second Column Group adjacent after, also by year. Your query could look something like this, depending on how your tables are structured:
SELECT a.Audience, a.Category, a.ProductGroup, a.Year, a.Value, b.Year as LastYear, ISNULL(b.Value,0) as LastYearValue
FROM YoYGrowth a LEFT OUTER JOIN
YoYGrowth b ON a.Audience = b.Audience and a.Category= b.Category and a.ProductGroup = b.ProductGroup
AND a.Year-1 = b.Year
Hope it helps. Cheers,
Martina White

Calculations with Web Report results

Hello, I'm just getting started with SAP BW and Web Reporting and thats why I need some help. I have created a Web Report that shows the query results in a table. Now I want to make further calculations within the report. Therefore I have to access the results of the web report and I just dont know how to do this. Maybe there are some javascript functions for that problem?

A basic form of web report is to show the Bex report in Web table form, for that we assign the query to the table in the web table item.
if further calculations need to be done using the already present keyfigures, then you can use the Calculated Key figure.
Depending on the scenario you can also define the cell calculations, if you have structures both in the rows and columns.
Refer to Web Table API to manipulate the cells of the web table. This article using Web Table API could be helpful for you.
Table interface doubt ?

Shared DateVar in Subreport and datediff calculation in Main Report?

Hello experts,
I am using CRXI sp2. I have a report that contains two subreports for different dates in the same date field that are identified by a Service Code. The subreports have been placed in the same group footer 1a to be displayed and the calculation resides in the main report group footer 1b. The shared variables are as follows:
whileprintingrecords;
shared datevar Codedate5473;
Codedate5473:={@Codedate5473};
and
whileprintingrecords;
shared Datevar Codedate5623;
Codedate5623:={@Codedate5623}
The main report has the following calculation is in group footer 1a.
Whileprintingrecords;
Shared numbervar daysbetween;
if (isnull({@Shared 5623})or isnull({@Shared 5473})) then 0
else daysbetween:= datediff("d",{@Shared 5623},{@Shared 5473})
This returns negative numbers as well as calculations where one of the shared variables is null.
I reset the calculation in the report header as well.
Thanks for your help in advance.
Kevin

Hi Kevin,
I can reproduce your issue, As per my knowledge the crystal will make some issues in null value computation as well as shared variable computation
In your report i can see , you tried to access values from subreport to main report through shared variable. that will make problem. we can access values from main report to subreport without any issue using shared..dont ask me the reason..i am not the right person to say that... lol.
The another wrong thing i was found in your formula is , you are not resetting the shared variable any where.. so once the date field is null, the shared variable returning the previous value.
So this is the solution for you..
1,You have to add one more subreport for displaying your result., Lets say 'Sub report3'
and create a formula, like.(Same which you have write before for the result)
shared datevar Codedate5473;
shared Datevar Codedate5623;
numbervar daysbetween;
WhilePrintingRecords;
daysbetween:= datediff("d",Codedate5473,Codedate5623);
daysbetween;
2, Re- write your first two formulas like this
For Subreport1,
WhilePrintingRecords;
shared dateVar Codedate5473;
if isnull({Codedate5473}) then
Codedate5473:=date(0,0,0)
else
Codedate5473:=date({Codedate5473});
For subreport2
WhilePrintingRecords;
shared dateVar Codedate5623;
if isnull({Codedate5623}) then
Codedate5623:=date(0,0,0)
else
Codedate5623:=date({Codedate5623});
Hope this will works for you,
Cheers,
Salah.
Edited by: salahudheen muhammed on Aug 7, 2009 1:05 PM

How to link PDF document in Report Layout??

I need to display the contents of PDF document after the form letter report. I tried OLE object but at the runtime it does not display the content. Does any one knows how to attach PDF document in reports layout?
Thanks
Ravindra

you will have to concatinate your report output with the static PDF document. in reprots 10g you can create a cusotm destination that could implement this functionality.
out of the box, reports does not provide the ability to add static content in PDF to reports' generated PDF output.
thanks,
philipp

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

How to incorporate ratio in Crystal Report?

Hi,
I am new in Crystal report and had no technical background.
I would like to know how to build ratio in crystal report? The draft layout as below:
                                              (RM)        %
Sales Revenue                        A           (A/A)*100
Cost of sales                           B            (B/A)*100
Where A and B are formula in crystal report.
Regards
Thomas

Hi Thomas,
Ratio is just a result by division. If you take one field over another as a denominator, you got your ratio.
Thanks,
Gordon

How to do this in Crystal Report

I have table a and table b in two database.
I made connections. Want to implement this kind of query in
CR.
How can i do this using add command?. Is it possible to type
in below query in add command of one database and make it work?.
table a and b are in two data database connection.
select * from a
where a.id not exist
(select b.id from b where a.id = b.id)

i need to set where condition in crystal report like count {table.support} where ({table.support} = "others")
support
others others myself parent others
then the result should be : 3
how to do this in crystal report ? i'm just a newbie in crystal report.
You should go on a Crystal reports forum for your version of Visual Studio and Crystal reports probably.
SAP Crystal Reports, version for Visual Studio
Please BEWARE that I have NO EXPERIENCE and NO EXPERTISE and probably onset of DEMENTIA which may affect my answers! Also, I've been told by an expert, that when you post an image it clutters up the thread and mysteriously, over time, the link to the image
will somehow become "unstable" or something to that effect. :) I can only surmise that is due to Global Warming of the threads.

How RONA (CallsRONAToHalf) Calculated in ICM reports

Similar Messages

Maybe you are looking for