How should I insert a placeholder för pictures in form central?

OK, you can use the buttonImportIcon method to do this. Here's a link to one of several discussions about this: http://forums.adobe.com/message/4943725
Since the users will have Acrobat, you can ignore all of the comments about the limitations of Reader. Acrobat can import anything it knows how to convert to PDF.

Similar Messages

How do I find out which plan I have in Forms Central?

The title says it all.

if you're wondering what specific phone model you have which is what I was wondering (couldnt work out if I had 5,1 or 5,2) try this then
enter the last 3 digits of your serial number and load the page
http://www.everymac.com/ultimate-mac-lookup/?search_keywords=
for example= TYA

How can I hide the option to "Open in Adobe Forms Central" in embedded responses.

Hello All,
I created a Web based form and the responses received through same are available in an web page (through embed code). Now I wish to limit the ability of those viewing same to export the data in XLS format. For this one thing I need to somehow enable is to remove the "Open in Adobe Forms Central" as the export to XLS option is only available there.
Looking forward to your responses.

...... if anything,
this could have appeared after I did the EFI frimware update.
So, is it standart to see the "choose network" option (below the bootable volumes)
in te start up manager (option-boot) ?
cheers,
pascal

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

You can add it as a file attachment. Exactly how you do this depends on the version of Acrobat you're using, but if you open the Attachments panel, you should see where you can add a file.

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

PIONEER DVD-RW DVR-105:
Firmware Revision:          A506
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

Data should get inserted in all tables if i enter the form field only once

Hi, I have a new question again.
There are 5 tables in a database, that is t1, t2, t3, t4 & t5. the first 4 table has one common column, known as lc_no. I have build the form using the form builder. In that form, there is a 1 text field for lc_no. I have not started to code anything as yet in the form because everything with respect to it is working fine and even the data is getting inserted. But the problem is that, when i enter the data in the form, the lc_no gets loaded in only one table. I want the data to get inserted in all the tables. What should i code? How should i start off? I'm very new to this & don't exactly know how do i start with it ?
Thank You. Can you help as i have not yet started to code in this form.
Oracle9i Enterprise Edition Release 9.2.0.1.0.
oracle forms 6i.

Let us say table one have lc_no, other columen
Table 2 have LC-no , other columsn
Table 3 have lc-no , other column,
Now in form(which has table1 as base table)
In PRe-Insert write like below
Insert into table2 (lc_no) values (:table1.lc_no) here tabel1 should be block name in form.
Insert into table3 (lc_no) values (:table1.lc_no)
................and so on .. to other table.
So, now when user commits the form, the lc_no will be available in all the other tables..

How do i insert a thumbdrive into my ipad

How do I insert a thumbdrive iinto my ipad?
Can I use the camera connection?
If I want wireless connection for my ipad am I better getting a chip?

patricia244 wrote:
Thanks
I have a chip currently as a free trial.
In my area I cannot get broadband, and use my normal computer thru satellite dish,which is very slow,
The chip for my iPad is much quicker.
I have recently purchased a modem which is in the form of a USB, so once chip,trial is finished I will try this connection thru the camera connection, and that should work
Glad you appear to have it sorted out as I still have no idea what you mean by "chip".
Best of luck.

How do I insert a file into a package upon launch AppV 5

Hello everyone, I have a number of different clients that use the same version of QuickBooks. However, resequencing the same application and storing in the content store is not realistic. I would like to take an existing sequenced package, and have it execute
a script that will pull the license from a shared location based at their site. I am not sure how to write the script or where to put it.
Here is the path where the file is located.
C\ProgramData\Common Files\Intuit\QuickBooks
Thank you for your help
Paul
Duramaxster

Knack, okay, so I create a PS script to insert a file? What is the file path to the path I described above to use in my powershell script? How should it look?
Does this look right for the Powershell command (Saving as QBLicense.ps1)? I am just learning PS. See inBOLD.
Do I have to add the .PS1 file to the Scripts folder in the Package before saving? I am assuming yes...
function Get-ScriptDirectory{
$Invocation = (Get-Variable MyInvocation -Scope 1).Value
Split-Path $Invocation.MyCommand.Path
$vfsPath = Join-Path (Get-ScriptDirectory) ""
write-host$vfsPath
$LICSource = \\Server.local\license\QBLicense.dat
Set-Location $vfsPath\Common AppData\COMMON FILES\INTUIT\QUICKBOOKS
copy-item -path $LICSource -destination $vfsPath
And do I keep this Userscript as is?
<UserScripts>
<StartProcess RunInVirtualEnvironment="false">
<Path>powershell.exe</Path>
<Arguments>-ExecutionPolicy Bypass -File "[{AppVPackageRoot}]\..\Scripts\QBLicense.ps1"</Arguments>
<Wait RollbackOnError="true"/>
IS THIS NEEDED ---> <ApplicationId>[{AppVPackageRoot}]\Sudoku.exe</ApplicationId>
</StartProcess>
</UserScripts>
One more thing, will this run first before the application actually runs, or should I place this in the MachineDeployment script?
Thank you!
Paul
Duramaxster

How do i insert into table through forms

Hi
I have developed a custom form based on custom table.
the only way to insert data into database table is through form.
there are two tables: one table is to store all contract details & second table is to maintain history forthis.
one condition(col1,col2,col3,col4) are unique combination,we are not creating any PK or FK at database level.evrythng is captured at form level.
if all 4 columns combination exist thn e should not insert that record.
if 4 columns combination doesnot exist then insert into table.
I have used just pre insert,pre update triggers.
I think its a basic form functionality ,by itself it inserts ,update record.now it is doing the same thng.
But I have to add the above condition ,how can i do that.
Pl provide me some ex code .
Thank you.
Hope any one can help me

SQL> create table t
2 (object_id    number
3 ,object_name varchar2(30));
Table created.
SQL>
SQL> create sequence t_seq;
Sequence created.
SQL>
SQL> insert into t (object_id, object_name)
2 select t_seq.nextval
3        ,object_name
4 from   all_objects
5 ;
52637 rows created.

Creating a form with WebDB - how should I start ?

Hi,
Since I am a beginner in this area and nobody can help me at the office (but deadline is very close:) I hope somebody can help me at this forum..
So my problem is the followng:
I have a table 'Entity' with columns:
- ID// Name// Version// PreVersion and so on...
There is already implemented a form for Defining new entity. That form introduces Version = '1.1-0' (by default) and PreVersion = 'N/A' (by default), and of course Name and others are introduced by end user.
Now I have to implement a form for creating a new version from a specific Name and from an existing version (of course at the beginning there will exist only versions 1.1-0)
So I don't have idea at the moment which kind of form should I start with: forms on stored procedures or forms on tables/views or other type ?
The form should work in the following way:
when user executes it, he/she must give the Name and Version (from which new version must be created) and then a new row must be inserted with values copied from previous row (or if it's easier with NULL values); BUT Version of the new row must be a value entered by end user and PreVersion of new row must be the value of Version of the modified (previous) row.
For me it's difficult to imagine how can I solve a kind of parametrization in the form. I mean let say I have two columns in the form definition: Ent_name and Version where user gives the searching criteria i.e. Version and Name value of the row which must be modified, but how can I refference them in a SQL code let say added for example in 'Advanced PL/SQL Code' menu of form definition ?
I would appreciate any good idea just to give me a kick in what way sould I start ...
Br.
Szilard

Hi,
You can reference the columns in the additional plsql code using session variables. All the columns are referred with 'A_' prefixed to the name of the column. You can make use of p_session.get_value_as_<datatype> to get values and p_session.set_value to assign values to these columns.
Here is an example
declare
flightno number;
ticketno varchar2(30);
tdate date;
persons number;
blk varchar2(10) := 'DEFAULT';
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
tdate := p_session.get_value_as_date(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE');
persons := p_session.get_value_as_number(
p_block_name => blk,
p_attribute_name => 'A_NOF_PERSONS');
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_FLIGHTNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TICKETNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE',
p_value => to_char(NULL)
Hope this helps.
Thanks,
Sharmila

How to insert a link of file in the form and view it at any time i need

Hi
I'm using developer 2000/Form designer form version 4.5
how i can insert a link of any file Word, Excel, PDF, JPG in the form run time
and open it from the form at any time i need
example
i have employ table which contain details of the employ and i want to attach a link of his photo which i already saved it in local drive
so when i have a new employ i enter his details and brows of his photo and when i select the link of the photo will be with his other details
and when i need to view the details of the employ just enter the emp_no and i will get details including the photo link and when i want to open the photo just double click the link
any body can help me on this
regards

Hi,
I think you should investigate in how to upload the information into the database. If the employee keeps the photo on the local drive then this isn't realy for everyone to use
Your options are : Upload to the database as ImageItem
Frank
Ps.: Forms 4.5 is desupported

How do I insert a font in Mail which is not in the Pref. scroll-down menu?

How do I insert a font in Mail which is not in the Pref. scroll-down menu?
I love Palatino, I have it bot in the System fonts folder, in the home/library/fonts folder and in the computer/library/fonts folder.
Yet, It does not come out.
Something else I should be doing?

Keep in mind that if the recipient of the email doesn't have Palantino active on their computer, they're not going to see that font on their end. Their system will replace any instance of Palantino with whatever font is they have set as the default in their mail program.

How do I insert a hyperlink in an e-mail?

when I compose an e-mail, occasionally I would like to insert a hyperlink. I can do this operation if I use a browser other than Firefox.
I am using Microsoft XP. I am trying to do this operation using Mozilla Firefox. How do I accomplish this?

Webmail sites typically have a link tool that appears on the formatting bar above the compose box. The specifics might vary but generally speaking, if you click the button for the link tool, paste the link, then OK that, a link should be inserted at the current cursor position.
To see what I mean for Yahoo! mail, check out this thread: [https://support.mozilla.org/en-US/questions/938081 url is not highlighted when sending it on an email and cannot be directly accessed].
Does that help?

In Font Book OS 10.8.5 how do you insert a character with Font like you could in 10.6

In OS 10.6 I could go >edit>special characters: view glyph, glyph Catalog, Font: <font name> and I would see a table of each character in a font. Then, I could select a character and either drag it to my document or click Insert Font in the lower right hand corner and it would put the character into the document.
How do I do the same thing in OS 10.8.5? How do I insert a character into a document through fontbook or any other manner?

You need to use another app for this, like Ultra Character Map or Popchar.
This should only be necessary if you are using a non-standard font, which may not be a good idea (since there is no guarantee your glyph will be seen by anyone else). If the character exists in Unicode, you should be able to find it in Character Viewer and input via double-click or drag/drop.
If you provide examples of what you need to input, I can perhaps tell you how to find them.

How should I insert a placeholder för pictures in form central?

Similar Messages

Maybe you are looking for