How to 1-clik zero out brush sliders please?
Develop>adjustment brush
In that panel, there's a dozen sliders, and they can be
all over the place from the last use. In that panel: custom>restore default presets,
nothing ever changes - those sliders never zero out. Where is the one click zero out?
Thanks anyone
Steve Zeeeee wrote:
now how do we do this in the ACR dialogue which has no "effects" button?
The adjustment brush interface can be used in one of two basic sequences, in both LR and ACR:
A - change the sliders / select a brush preset, then click to add an adjustment pin
B - click to add an adjustment pin, then change the sliders / select a brush preset
Then whichever method has been used, you have
C - adjust this pin further as needed.
Each pin remembers how things were last left, when it was last selected - which may be the result of A, B or C..
The LR / ACR default shows how things were last left, with NO adjustment pin selected - so, it reflects method A changes , but not method B changes.
These settings are then copied onto any new pin added, as its starting values.
If you normally do option A, you will see a different starting default each time, left over from whatever you last did with the tool.
If you normally do option B, then you will not see these sliders changing around just because of what you last did. You can set a persisting preference (with no pin highlighted) and then just leave that in place for the moment.
Similar Messages
-
How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?
How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?
I assume there are already instructions on Apple.com someplace but haven't seen them yet… I have to one terabyte drives one the operating system the other is blank I want to start fresh I want to zero out both drives but I didn't want to make any mistakes
I know I can use disk utility to 0 Out Dr., #2 that means I will have to take out the operating system hard drive out of my 2008 Mac Pro and put it into my 2009 Mac Pro to use the disk utility to zero out drive one the OS drive in my 2009 Mac Pro am my correct
I just need a little bit a help I want to go slow so I don't make any mistakes with the sleds or with the erasing process which journaled to choose encrypted or not etc. etc.
Furthermore is there instructions on the site on how to change the hard drive into a different sled because the sleds and my 2009 are different than my 2008 any advice
Thank youI'm doing this because my friend told me that zeroing out the drive can nap bad sectors and also later for some kind of diagnostics usage of the drive or something like that he wasn't really clear
My friend was really specific he said choose the option that writes zero's once over the drive that is plenty good enough I was inclined to use the maximum seven write ...I just want to make sure the drive has no bad sectors and that's it's it's zeroed out for possible future diagnostics usage or something that he said was usable later
he also advised me to run a test on it but I don't have the software you mentioned or the software that he has… So I may have to take the drives over to his house unless you have some kind of free software that's easy to use that you could suggest that will not only zero out the drive but test the drive completely
I am completely new to Mac I'm no dummy but at the same time I'm not super technically capable I mean I can surprise myself I'm pretty good but I need a good teacher… How expensive is this lifeguard software?
Thank you -
Left outer join issue, please help
Hi All,
My oracle DB : 10G
I have 3 tables:
1) w_orders_fs
2) w_product_d
3) w_order_f
(Below are the scripts for creating these 3 tables along with data)
I have a sql which :
select o_fs.invoice_number
, o_fs.product_id o_fs_product_id
, p_d.product_id p_d_product_id
, p_d.row_wid_skey p_d_row_wid_skey
, o_f.product_wid_skey
from w_orders_fs o_fs
, w_product_d p_d
, w_orders_f o_f
where o_fs.invoice_number = 10
and o_fs.product_id = p_d.product_id(+)
and p_d.current_flg = 'Y'
and p_d.row_wid_skey = o_f.product_wid_skey(+)
and o_f.invoice_number = 10
which is giving me an output :
INVOICE_NUMBER|O_FS_PRODUCT_ID|P_D_PRODUCT_ID|P_D_ROW_WID_SKEY|PRODUCT_WID_SKEY
10|2|2|4|4
Desired output:
INVOICE_NUMBER|O_FS_PRODUCT_ID|P_D_PRODUCT_ID|P_D_ROW_WID_SKEY|PRODUCT_WID_SKEY
10|2|2|4|4
10|1|1|3|NULL
Now the overall objective is to pull the 2nd record of my desired output, my above query is not giving me this 2nd record since in my w_orders_f table product_wid_skey is not populated(one of the 2 records where invoice number = 10), I am just confused how to achieve this left outer join.
Please help.
Regards
Rahul
CREATE/INSERT SCRIPTS:
CREATE TABLE W_ORDERS_FS
INVOICE_NUMBER NUMBER(3),
INVOICE_DT DATE,
CREATED_BY NUMBER(6),
CREATED_ON_DT DATE,
CHANGED_BY NUMBER(6),
CHANGED_ON_DT DATE,
LAST_UPDATE_DT DATE,
CUSTOMER_ID NUMBER(6),
PRODUCT_ID NUMBER(2),
PRICE_PER_UNIT NUMBER(5),
STORE_ID NUMBER(4),
OTY_ORDERED NUMBER(5),
TOT_PRICE_BY_PRODUCT NUMBER,
ETL_PROC_WID VARCHAR2(100 BYTE),
DATASOURCE_NUM_ID INTEGER
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(10, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 160, 1, 8, 1000, 10, 80, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(10, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 160, 2, 25, 1000, 10, 250, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(11, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 161, 6, 9, 1100, 10, 90, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(12, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 5, 10, 1500, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(13, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 163, 5, 10, 2000, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(14, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 1, 8, 1400, 20, 160, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 2, 25, 2200, 5, 125, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 6, 9, 2200, 5, 45, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 5, 10, 2200, 5, 50, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 1, 8, 2200, 5, 40, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 165, 3, 10, 2200, 15, 150, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 165, 1, 8, 2200, 25, 200, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 165, 4, 1, 2200, 55, 55, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 5, 10, 2200, 55, 550, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(17, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 160, 1, 8, 1000, 10, 80, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(17, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 160, 7, 10, 1000, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(18, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 161, 1, 8, 1400, 10, 80, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(18, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 161, 7, 10, 1400, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 3, 10, 1100, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 4, 1, 1100, 10, 10, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 165, 5, 10, 3200, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 165, 6, 9, 3200, 10, 90, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 8, 5, 3200, 10, 50, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 2, 25, 3200, 10, 250, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 9, 1, 3200, 10, 10, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 10, 5, 3200, 5, 25, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(24, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 1, 8, 3200, 10, 80, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(24, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 10, 5, 3200, 5, 25, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(23, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 3, 10, 1100, 10, 100, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(23, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 162, 4, 1, 1100, 10, 10, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(22, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 1, 8, 3200, 10, 80, '22858060', 1);
Insert into W_ORDERS_FS
(INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, CUSTOMER_ID, PRODUCT_ID, PRICE_PER_UNIT, STORE_ID, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(22, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 164, 2, 25, 3200, 10, 250, '22858060', 1);
COMMIT;
CREATE TABLE W_PRODUCT_D
ROW_WID NUMBER(10),
ROW_WID_SKEY NUMBER(10,5),
PRODUCT_ID NUMBER(2) NOT NULL,
PRODUCT_NAME VARCHAR2(50 BYTE),
OTY_IN_STOCK NUMBER(5),
CREATED_BY NUMBER(2),
CREATED_ON_DT DATE,
CHANGED_BY NUMBER(2),
CHANGED_ON_DT DATE,
LAST_UPDATE_DT DATE,
W_INSERT_DT DATE,
W_UPDATE_DT DATE,
CURRENT_FLG VARCHAR2(1 BYTE),
ORIGINAL_QUANTITY NUMBER(10),
ETL_PROC_WID VARCHAR2(100 BYTE),
DATASOURCE_NUM_ID NUMBER
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(1, 1, 7, '7up', 180, 20, TO_DATE('06/04/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 200, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(2, 2, 8, 'Nestle munch', 990, 23, TO_DATE('06/05/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 1000, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, CHANGED_BY, CHANGED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(3, 3, 1, 'Coca cola mini', 0, 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 100, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, CHANGED_BY, CHANGED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(4, 4, 2, 'coca cola peg bottle', 465, 20, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 500, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, CHANGED_BY, CHANGED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(5, 5, 3, 'ruffle lays', 965, 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 1000, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, CHANGED_BY, CHANGED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(6, 6, 4, 'center fresh', 9925, 23, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 10000, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(7, 7, 5, 'Mirinda', 10, 20, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 100, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(8, 8, 6, 'pepsi', 25, 20, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 50, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(9, 9, 9, 'Mentos mint', 990, 20, TO_DATE('06/13/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 1000, '22858060', 1);
Insert into W_PRODUCT_D
(ROW_WID, ROW_WID_SKEY, PRODUCT_ID, PRODUCT_NAME, OTY_IN_STOCK, CREATED_BY, CREATED_ON_DT, CHANGED_BY, CHANGED_ON_DT, LAST_UPDATE_DT, W_INSERT_DT, CURRENT_FLG, ORIGINAL_QUANTITY, ETL_PROC_WID, DATASOURCE_NUM_ID)
Values
(10, 10, 10, 'Marie gold biscuit', 0, 20, TO_DATE('06/13/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('06/18/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 13:29:24', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/19/2013 11:09:35', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 10, '22858060', 1);
COMMIT;
CREATE TABLE W_ORDERS_F
ROW_WID NUMBER,
INVOICE_NUMBER NUMBER(3),
INVOICE_DT DATE,
CREATED_BY NUMBER(6),
CREATED_ON_DT DATE,
CHANGED_BY NUMBER(6),
CHANGED_ON_DT DATE,
LAST_UPDATE_DT DATE,
PRODUCT_WID_SKEY NUMBER(15),
PRICE_PER_UNIT NUMBER(5),
OTY_ORDERED NUMBER(5),
TOT_PRICE_BY_PRODUCT NUMBER,
W_INSERT_DT DATE,
TIME_WID VARCHAR2(29 BYTE),
DAY_NUM_OF_WEEK NUMBER,
MONTH_END_DT DATE,
QUARTER_NUM_OF_YEAR NUMBER,
YEAR_END_DT DATE,
ETL_PROC_WID VARCHAR2(100 BYTE),
DATASOURCE_NUM_ID INTEGER,
INTEGRATION_ID VARCHAR2(100 BYTE)
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(1, 10, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 10, 80, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '10~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(2, 10, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 4, 25, 10, 250, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '10~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(3, 11, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 8, 9, 10, 90, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '11~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(4, 12, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 7, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '12~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(5, 13, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 7, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '13~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(6, 14, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 20, 160, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '14~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(7, 15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 4, 25, 5, 125, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '15~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(8, 15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 8, 9, 5, 45, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '15~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(9, 15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 7, 10, 5, 50, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '15~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(10, 15, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 5, 40, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '15~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(11, 16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 5, 10, 15, 150, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '16~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(12, 16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 25, 200, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '16~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(13, 16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 6, 1, 55, 55, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '16~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(14, 16, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('05/28/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 7, 10, 55, 550, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '05282013', 3, TO_DATE('05/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '16~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(15, 17, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 10, 80, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '17~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(16, 17, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '17~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(17, 18, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 10, 80, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '18~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(18, 18, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '18~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(19, 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 5, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '19~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(20, 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 19, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 6, 1, 10, 10, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '19~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(21, 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 7, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '20~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(22, 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 20, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 8, 9, 10, 90, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '20~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(23, 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, 5, 10, 50, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '21~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(24, 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 4, 25, 10, 250, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '21~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(25, 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 9, 1, 10, 10, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '21~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(26, 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 21, TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/14/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 10, 5, 5, 25, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06142013', 6, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '21~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(27, 24, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 10, 80, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06182013', 3, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '24~1');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(28, 24, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 10, 5, 5, 25, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06182013', 3, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '24~1');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(29, 23, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 5, 10, 10, 100, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06172013', 2, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '23~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(30, 23, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 22, TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/17/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 6, 1, 10, 10, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06172013', 2, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '23~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(31, 22, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), -8, 8, 10, 80, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06162013', 1, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '22~');
Insert into W_ORDERS_F
(ROW_WID, INVOICE_NUMBER, INVOICE_DT, CREATED_BY, CREATED_ON_DT, LAST_UPDATE_DT, PRODUCT_WID_SKEY, PRICE_PER_UNIT, OTY_ORDERED, TOT_PRICE_BY_PRODUCT, W_INSERT_DT, TIME_WID, DAY_NUM_OF_WEEK, MONTH_END_DT, QUARTER_NUM_OF_YEAR, YEAR_END_DT, ETL_PROC_WID, DATASOURCE_NUM_ID, INTEGRATION_ID)
Values
(32, 22, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 23, TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 4, 25, 10, 250, TO_DATE('06/19/2013 12:17:41', 'MM/DD/YYYY HH24:MI:SS'), '06162013', 1, TO_DATE('06/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 2, TO_DATE('12/31/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), '22858060', 1, '22~');
COMMIT;This works:
select o_fs.invoice_number
, o_fs.product_id o_fs_product_id
, p_d.product_id p_d_product_id
, p_d.row_wid_skey p_d_row_wid_skey
, o_f.product_wid_skey
from w_orders_fs o_fs
, w_product_d p_d
, w_orders_f o_f
where o_fs.invoice_number = 10
and o_fs.product_id = p_d.product_id(+)
and p_d.current_flg(+) = 'Y'
and p_d.row_wid_skey = o_f.product_wid_skey(+)
and o_f.invoice_number(+) = 10
If you want to outer join to a table, you have to include a ( + ) on each of its columns in the where clause (or cope with them possibly being null). Personally, I find ANSI syntax easier to work with when dealing with outer joins:
select o_fs.invoice_number
, o_fs.product_id o_fs_product_id
, p_d.product_id p_d_product_id
, p_d.row_wid_skey p_d_row_wid_skey
, o_f.product_wid_skey
from w_orders_fs o_fs
left outer join w_product_d p_d
on o_fs.product_id = p_d.product_id
and p_d.current_flg = 'Y'
left outer join w_orders_f o_f
on p_d.row_wid_skey = o_f.product_wid_skey
and o_f.invoice_number = 10
where o_fs.invoice_number = 10 -
Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?
See this article.
-
How can I zero out offset voltage at the start of the program?
I have a simple program that reads a voltage input and outputs the results to a file. The voltage has an offset (which changes from test to test), and I am interested in zeroing out this value at the start of acquisition. I could use an example of how to do this. Thanks.
Try this simple method...
Right click on the icon which represents the offset voltage. Select create: Invoke Node.
Use the finger pointer and click on the "Method" of the newly created Invoke Node. Choose "Reinit To Dflt"
Place this Invoke Node at the beginning of your vi by running the Error In through it.
And "voila"... everytime you run your vi, it will reinitialize it to the default value... which can be zero.
You can use the same trick to re-initialize values if a certain condition is met within your vi.
-have fun-
JLV -
How to know the size of bad sector block after zero out erase?
I found some problems on my USB external harddisk recently. After I backup all the files, I erased the whole volume by choosing "zero out data" option. According to some web articles, "zero out" detects and marks those bad sectors to avoid further read/write action on the damaged area.
My question is that how can I know the size of disk space marked as bad sector? Because I can only see how many space is used or available when I check a disk in disk utility. There are about 600MB used for my 1TB hard drive. I guess there is some storage used by spotlight or other hidden files. But I have no idea for how many MB is occupied by bad sector...Yes you can look at see the original number of spares, the number used, and the number remaining spares.
Disk Warrior for one, writes the SMART data to system.log Other programs can also read and report (not sure which if any write to system.log though) those field values from SMART table entries.
IF the number of spares is declining, time to replace. Trouble is OS X hasn't had a good record of reporting I/O errors, let alone remapping. Some 3rd party utilities will. I've found the vendor (WD, Hitachi etc) have the best utility for their own drives, but those are Windows programs or LinuxCD. Also the best way to zero and map out bad sectors, too. -
everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?
You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
How can I zero out the memory on my macbook air?
I have an 11 inch mid 2011 macbook air and cannot figure out how to erase the memory so that none of the data is recoverable. I booted from the recovery HD but when I went to the erase section of the menu, the security options button and the zero out empty space option were both greyed out. How can I clean off my Mac?
You can't, and don't need to, zero an SSD in Disk Utility. Once you've erased it the data is unrecoverable.
-
How to generate the zero packet on the Bulk-OUT pipe by NI-VISA?
I can generate the Bulk-OUT "*IDN?"on this USB RAW Class device by using write.
But, how to generate this zero packet(Short packet) on the Bulk-OUT pipe?
YY
Attachments:
zero packet.PNG 15 KBWhat program did you use to show the USB comms?
There is a single difference between the two transfers in the iomage below. The T on the left of the "number of Bytes" is different but I don't know what that means. YOu should check the software you used to find out what this means.
I would post a Bug report that VISA is ignoring zero-byte transfers.
Shane.
Say hello to my little friend.
RFC 2323 FHE-Compliant -
Is there a way zero out all the sliders on all images in a folder?
is there a way zero out all the sliders on all images in a folder? lightroom is applying what appears to be auto tone on all images as each images sliders are different. all import options are shut off or on 'none' so i have no clue why LR is applying these settings. When I reset images it puts them back the imported auto settings. So lightroom is perceiving those as baseline. Please help!
Hi Rikk, thank you for the quick reply, I tried what you said and while this SHOULD have worked, for some reason it did not.
So i'm importing 1500 RAW Canon 5dmkII files from my CF cards. under "apply during import" everything is marked as NONE.
import goes smooth, all files brought in. and then Lightroom starts applying what appears to be auto tone. The reason i think it's auto tone is that the sliders are different from image to image, so it's not holding on particular prest.
As a general rule i don't use presets, occasionally i'll use LR punch but i almost never use presets, or do mass bulk setting changes.
This is all the info, I have been doing this same process since LR3 and never had this issue. Hope that helps clear things up and thanks again! -
How to zero out disk apple G3 I do not have the install disk
I have an old IMAC G3 running 10.3.9. I want to know how to zero out the disk. I do not have the original installation disk. Is there a way to erase and zero out all data on the disk, without having the original startup/installation disk? Thanks.
Actually, it is a G4 with the bulb base. We are getting rid of this computer, and want to safely and securely erase the hard drive. I had read that zeroing out the disk is the best way to wipe/scrub this disk. Thanks!
-
How do I zero out data on OSX 3.9?
I went into disk utility and I could not zero out data by choosing erase. I'm reselling my old computer and want to be as secure as I can be. I rebooted the computer using the start-up disk, but I have read that this is not a very secure way to protect yourself. Please help.
Boot from the install CD. Launch DiskUtility and select the internal HD. Click on the erase tab. There should be an options button - click on that. You can zero all data - this will take a while, but be pretty secure. There is also, I believe an option to rewrite several times to eliminate the chance of someone finding "shadows" of old data that may remain after the drive has been zeroed out.
Zeroing all the data should be sufficient unless you're selling it to the precocious offspring of an NSA staffer.
Jeff -
How to zero out my data for chart
I am very new to LabVIEW so please be patient.
I am aquiring 12 channels of 0-10 volt signals through a cDAQ-9174 chassis and 9205 module on Labview 11. I am using producer/consumer loops to the write the data to a file also sent to two charts. I want to keep the data sent to the file as is, and then tare (zero out) the data going to the charts.
I have attached the code. Please ignore the diagram dissable structure and it's contents.
Any help would be appreciated,
~Chris
Attachments:
WaveTest_2.8.vi 258 KBAre you supposed to get the this offset each time you press Start, or only the first time? For example, if I press "Start Test A", run it for 5 minutes, and then press it again to stop it, and then 10 minutes later I press it again to start it, do you need to update the offsets, or would you use the ones from 15 minutes earlier? Since the producer consumer loops are running all the time, I would suggest using a shift register/feedback node to keep track of whether you've acquired the offset values. Reset the flag when you turn off the test if you want to get the offsets "fresh" on the next start. As for where to save this, a simple local variable will work (yes, I said local variable, all you local variable haters out there!). In this case you will not run into a race condition.
Note: you do not need to use your own buttons for controlling the visibility of plots. In LabVIEW 2011 that's built-in. Show the plot legend, and then right-click on the legend and select Visible Items -> Plot Visibility Checkbox.
See attached modification for one possible implementation. Note that I removed the enqueing done in the False case in the producer loop since I did not see much point in enqueuing when you didn't actually get any data.
Attachments:
WaveTest_2.8 MOD.vi 215 KB -
Adjust Palette slider. Sometimes zeroed out, sometimes not
I can't understand what is going on.
I will edit my photos using the adjust palette and when I move on to the next photo, sometimes it says "saving changes" and sometimes not. On the photos where it does "save" the changes, when I go back to the photo, the adjustments are there, but the sliders have been zeroed out. This makes it impossible to "copy" the sliders and paste to another photo. Nor can I see what adjustments have been made.
While on some photos, it's doesn't "save changes" when I move away from it. When I return to the photo, the adjustments are there, AND the sliders are where I moved them to. This is what I WANT to happen on every photo so I can see what I've done. But on some photos it "saves" them and I can't see my adjustments in the sliders.
This seems completely random and changes from photo to photo within the same album. Both versions look right and have my adjustments correct, it's just that one will show me the adjustments in the adjust palette, and the other will have sliders zeroed out as if that's how the photo came right out of the camera.
What gives?
I'm on iPhoto 8
Thanks,
BrianI don't see anything that jumps out as to why but do see a couple of things you can try.
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder.
2 - empty the User/Library/Caches/iPhoto folder
3 - rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
If none of the above help, boot into another account (if you don't have one create a non-admin account as it's a very good troubleshooting tool), create a test library, import a few photos and give it a good editing workout. If the edits are saving as they should then there could be an issue with a preference file, other than iPhoto's, in your primary account. Here's how to determine if that's the case:
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
On a different note I see you have just 8 GB of free space. If you can increase that to around 15GB I'm sure you'll see an improvement in system and application performance. Also If you upgrade to 10.4.11 be sure to use the 10.4.11 COMBO updater. -
Disk Utility: Differences between "Zero Out Data" and "7-Pass Erase"?
I'm wondering if anyone knows if there's a significant difference between the "Zero Out Data" erase option in Disk Utility (specifically Disk Utility 10.5.5), and the "7-Pass Erase" and "35-Pass Erase" options in same software.
Here's why I'm asking: I have a co-worker with an iMac G5 20" 1.8GHz with 160GB internal hard drive. As a result of the power supply overheating a week ago due to dust, some hard drive problems resulted. I'm trying to assess whether these are 'soft' formatting problems that can be recovered from, or 'hard' problems requiring replacement of the hard drive and/or power supply.
Following the failure, I removed the dust and restored the iMac to servicable form. The power supply seems to be OK now. The next thing was to attempt to recover as much data as possible from the 160GB, as the last full backup was a week old. Carbon Copy Cloner, shell copy via 'sudo cp -p -R -v', Finder copy, and DiskWarrior recovery all met with problems. TechTool Pro identified a huge swatch of unreadable sectors during repeated surface scans. Unfortunately, these unreadable sectors were located midway in the OSX boot partition (an 80GB partition), and not in the other 80GB partition devoted to lower priority video data.
When I was satisfied I had backed up the data to the best of my abilities, I next set out to reformat the drive and see if the bad sectors could be eliminated or remapped out of existence. I did a "Zero Out Data" erasure in Disk Utility (with no errors during the erase), but TechTool Pro showed the bad sectors persisted in equal strength at the same location. I next executed a sixteen hour "7-Pass Erase" (again no errors, and confirming that it takes about an hour per 10GB). The next day when I ran TechTool pro, all of the sector errors had disappeared. I'm a bit perplexed as to why the "7-Pass Erase" seems to have recovered the use of the drive. Is it possible that there are simply thousands of bad sectors now remapped that I'm not seeing? [If so, how do I check for this?] TechTool Pro has not reported any S.M.A.R.T. issues to date on the drive. What am I to make of that?
There are some related threads I've checked into, but I'm not sure how to properly assess my situation based on this information:
<http://discussions.apple.com/thread.jspa?threadID=232007>
<http://discussions.apple.com/thread.jspa?threadID=138559>
<http://discussions.apple.com/thread.jspa?threadID=118455>
Since the iMac has three weeks left on it's one year warranty, and I've already moved the user to another machine temporarily, I'm thinking that the smart thing to so is to send it in to Apple to have them look at the power supply and hard drive. That way, when it returns, even if there is still a lingering hardware problem, at least it will be covered under warranty for another 90 days.
Any thoughts?
iMac G5 20" 1.8GHz Mac OS X (10.4.6) 1.25GB RAM, 160GB hard disk, SuperDriveHI, Bret.
The only differences between "Zero Out Data", "7-Pass Erase", and "35-Pass Erase" are the number of times a binary zero is written to every bit on the disk. "Zero Out Data" writes a binary zero once, whereas the 7- and 35-Pass options write a zero seven and 35 times, respectively.
Technically, one pass with Zero Out Data should be sufficient to map bad sectors out of service, a process also known as sparing. If a bad sector is encountered, it is both marked as "in use" in the directory's allocation table and added to the directory's "bad blocks file."
My understanding is that the Surface Scan of Tech Tool Pro should identify bad sectors every time it is run unless the bad sectors have been locked out by the drive controller of the ATA drive itself. This is because Surface Scan checks the entire surface of the disk.
What may have happened is that running "Zero Out Data" spared the bad blocks from a directory standpoint, but did not result in the drive's controller locking out those sectors for reasons detailed in the "Surface Scan" section of the Tech Tool Pro manual. However, the 7-Pass Erase may have resulted in the drive's controller locking out the bad sectors and why Surface Scan did not pick them up after such.
Given the problems you described, I concur with your plan to have Apple check the affected computer. You might also want to consider purchasing an AppleCare Protection Plan for that Mac: I recommend and buy these for all my Macs.
For some additional information on bad sectors, see the "Bad Sectors" section of my "Resolving Disk, Permission, and Cache Corruption" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Maybe you are looking for
-
Fixed graphic mode causes windows freezing dv7
Hello guys, I have a question about my hp dv7-6b21sm which has i7 2670qm, 8gb of ddr3, 1tb of hdd and a hd6770m graphic card. Now to the problem. A little ago I've figured that battlefield 3 will not run in fullscreen unless I turn on "Fixed" graphic
-
Ever since I updated Mozilla Firefox on my computer,my address bar disappeared. Also, I can no longer log into Elluminate Live sessions.
-
Thunderbolt display to Macbook displayport adapter
I have a nice new 2010 Macbook Pro 17" with mini displayport. I want to buy an Apple Display but the only ones still being sold are the new Thunderbolt displays. I've carefully read all the available info and came to the conclusion there is up to now
-
Payment Card Processing - CRM 4.0
Hi, I have done all the config and customisation required for the Payment Card Processing in CRM 4.0. I was wondering if I have to make some changes on the R/3 4.6 c side? Right now the authorisation is happening in CRM. Once the document goes to R/3
-
When I connect a camera to the MacBook Pro 15 Retina via the USB cable it is not being recognized. It does not show up in the bottom right under USB devices and it does not show up in Windows Explorer. When I go to Device Manager I see the camera und