How to access a recording if forgot URL

I recorded a role play and now I need to access it, any idea how I find it?

It should be in the Recordings section of your meeting room in Connect Central.
Clicking on the recording name will show the URL for accessing the recording.

Similar Messages

  • How to access Revenue records

    <b>[This thread was migrated from the On Demand Developer Forum in the old Siebel Community] </b>
    algocode
    New Contributor
    I try connecting to Revenue records with web services using the same user
    ID with which I'm able to create Service Revenue Details information from
    the CRM OnDeman user interface but instead, I get an error message saying
    "Access denied.(SBL-DAT-00553)";(SBL-EAI-04376).
    Why can't the web service read the revenue records that I am able to
    create or update manually from the CRM OnDemand portal, with the same ID?
    Product: General: IT Organizations and Processes
    10-27-2006 11:25 AM
    Re: how to access Revenue records
    algocode
    New Contributor
    Inside a class extending System.Web.UI.Page, I use the
    secure.crmondemand.com/OnDemand/user/account.wsdl?WSDLOBJ=account web
    service to
    1. Create a list of accounts and specify the fields returned by the
    result set;
    2. Create an AccountWS_AccountQueryPage_Input object;
    3. Retrieve an AccountWS_AccountQueryPage_Output object;
    These are the three methods involved:
    protected void Page_Load(object sender, System.EventArgs e)
    Account1[] objListOfAccount;
    //Initialize the ListOfAccount Arrays and Sub-Arrays
    objListOfAccount = createListOfAccount("";
    //Specify the Account Search Criteria
    objListOfAccount[0].AccountName = "LIKE '" + data["Account"] + "*'";
    //Tell OnDemand What Account fileds should be returned in the result set
    objListOfAccount[0].AccountId = "";
    objListOfAccount[0].Location = "";
    //Tell OnDemand What fields to return on the Opportunity Child
    objListOfAccount[0].ListOfOpportunity[0].OpportunityId = "";
    objListOfAccount[0].ListOfOpportunity[0].OpportunityName = "";
    objListOfAccount[0].ListOfOpportunity[0].CurrencyCode = "";
    //Tell OnDemand What fields to return on the Opportunity Service Child
    objListOfAccount[0].ListOfRevenue[0].RevenueId = "";
    objListOfAccount[0].ListOfRevenue[0].OpportunityName = "";
    objListOfAccount[0].ListOfRevenue[0].NumberOfPeriods = "";
    objListOfAccount[0].ListOfRevenue[0].Frequency = "";
    objListOfAccount[0].ListOfRevenue[0].StartCloseDate = "";
    //Call the Account Query
    AccountWS_AccountQueryPage_Input objAccQryParam =
    new
    AccountWS_AccountQueryPage_Input();
    objAccQryParam.ListOfAccount = objListOfAccount;
    objAccQryParam.PageSize = "90";
    AccountWS_AccountQueryPage_Output objQryOutput =
    RetrieveQueryPageOutput(objAccQryParam, session);
    public Account1[] createListOfAccount(string pstrAccountDimensions)
    int intAccountCount = 1;
    int intOpportunityCount = 20;
    int intRevenueCount = 10;
    try
    Account1[] rtnListOfAccount = new Account1[intAccountCount];
    for (int intAccIdx = 0; intAccIdx < intAccountCount; intAccIdx++)
    rtnListOfAccount[intAccIdx] = new Account1();
    rtnListOfAccount[intAccIdx].ListOfOpportunity =
    new
    Opportunity[intOpportunityCount];
    rtnListOfAccount[intAccIdx].ListOfRevenue =
    new Revenue[intRevenueCount];
    for (int intOppIdx = 0; intOppIdx < intOpportunityCount;
    intOppIdx++)
    rtnListOfAccount[intAccIdx].ListOfOpportunity[intOppIdx] =
    new Opportunity();
    for (int intRevIdx = 0; intRevIdx < intRevenueCount; intRevIdx++)
    rtnListOfAccount[intAccIdx].ListOfRevenue[intRevIdx] =
    new Revenue();
    return rtnListOfAccount;
    catch (Exception objExcep)
    throw objExcep;
    public AccountWS_AccountQueryPage_Output RetrieveQueryPageOutput(
    AccountWS_AccountQueryPage_Input qpinput,
    Session session)
    AccountWS_AccountQueryPage_Output qpoutput = null;
    // instantiate the proxy service
    Account accountProxy = new Account();
    try
    // set up the target URL & set the session cookie
    accountProxy.Url = session.GetURL();
    accountProxy.CookieContainer = session.GetCookieContainer();
    qpoutput = accountProxy.AccountQueryPage(qpinput);
    catch (Exception e)
    Response.Write("<br/><br/>" + e.InnerException);
    Response.Write("<br/><br/>" + e.Message);
    Response.Write("<br/><br/>" + e.StackTrace);
    return qpoutput;
    10-27-2006 02:31 PM
    Re: how to access Revenue records
    algocode
    New Contributor
    I found another way to access Revenue records. Instead of accessing the
    ListOfRevenue field of the Account web service, I access the ListOfProduct
    field of the Opportunity web service. I also instantiate Opportunity2
    objects so that the code to get a list of opportunities and products
    (containing revenue fields) becomes
    Opportunity2[] rtnListOfOpportunity = new
    Opportunity2[intOpportunityCount];
    try
    for (int intOppIdx = 0; intOppIdx < intOpportunityCount;
    intOppIdx++)
    rtnListOfOpportunity[intOppIdx] = new Opportunity2();
    rtnListOfOpportunity[intOppIdx].ListOfProduct =
    new Product[intProductCount];
    for (int intProdIdx = 0; intProdIdx < intProductCount;
    intProdIdx++)
    rtnListOfOpportunity[intOppIdx].ListOfProduct[intProdIdx] =
    new Product();
    return rtnListOfOpportunity;
    10-28-2006 11:17 AM
    Re: how to access Revenue records
    Echo
    Valued Contributor
    Weird. I'm not a big C# programmer but the code looks right. I'm curious -
    could you post some soap loads of the request. I'm wondering if there's
    something weird going on with the proxy.
    10-31-2006 12:00 AM

    I Assume the following is your sample data
    Table Name: Tab1
    RegID CustID Registration_Start      Registration_End
    1      1      01/04/2005           07/04/2005
    2      2      01/03/2005           29/05/2005
    3      1      21/03/2005           29/03/2005
    4      1      01/03/2005           21/03/2005
    Note : For the Regid "4" I have changed the Registration_End to 21/03/2005. It was earlier 21/04/2005.
    Coming to the query, you need to generate the list of regid that have gaps.
    Try the following query:
    SELECT c.*
    FROM tab1 c
    WHERE c.reg_id NOT IN (
    SELECT a.reg_id
    FROM tab1 a, tab1 b
    WHERE a.cust_id = b.cust_id
    AND a.registration_end = b.registration_start
    Note: I am sorry I didn't have access to the data base to execute my query. Correct me if I am wrong.
    Regards,
    Somu

  • How to access the Approvals task using url

    Hi,
    Please let me know how to access the approval tasks in BPM using the url.
    I need to access the approval tasks from outside BPM
    Thanks

    Hi Latha,
    There are many ways to pass parameters to 2nd page.
    However try using hashmap.
    1st page code in processformrequest:
    import com.sun.java.util.collections.HashMap;
    HashMap hashmap = new HashMap();
    hashmap.put("var_enpid",enpid);
    pageContext.forwardImmediately("XX_SECOND_PG", //Function Name of the 2nd page
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    null,
    hashmap, // put Null if no parameters to pass thru hashmap
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_NO
    2nd page code in processrequest:
    String empid = (String)pageContext.getParameter("var_enpid");
    Regards
    Sanu

  • How to access next record from database on to form

    hi
    i have written the following piece of code to retrieve data from database oon to form...
    Try
                rset = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                query = "Select * from [@TEST]  where Code =  ('" + oform.Items.Item("6").Specific.value + "') "
                rset.DoQuery(query)
            Catch ex As Exception
                SBO_Application.MessageBox(ErrorToString)
            End Try
            '  oform.Items.Item("6").Specific.value = rset.Fields.Item("Code").Value
            oform.Items.Item("7").Specific.value = rset.Fields.Item("Name").Value
            oform.Items.Item("8").Specific.value = rset.Fields.Item("U_Sal").Value
    but i can see only one record on my form controls.... i have placed on more button called " Next" so that i can access next records from DB when i click on "Next" button...
    Public Sub NextRecords()
    Try
         rset.MoveFirst()
                While Not rset.EoF
                 '   oform.Items.Item("6").Specific.value = rset.Fields.Item("Code").Value
                   oform.Items.Item("7").Specific.value = rset.Fields.Item("Name").Value
                  oform.Items.Item("8").Specific.value = rset.Fields.Item("U_Sal").Value
                   rset.MoveNext()
                End While
                rset.MoveNext()
          Catch ex As Exception
               SBO_Application.MessageBox(ErrorToString)
          SBO_Application.MessageBox("Updated")
           End Try
    End sub
    i'm not able to access next records...
    plz provide me the solution and code for this how to handle this scenario....

    From your question and code sample given, I think the problem is you are seeing only the last record when pressing the next button.
    In the Next button press, you are coded such a way that it will populate the last record.
    Try removing the do..While.. loop and simply code like
    if Not rset.EoF
    rset.MoveNext()
       oform.Items.Item("6").Specific.value = rset.Fields.Item("Code").Value
       oform.Items.Item("7").Specific.value = rset.Fields.Item("Name").Value
       oform.Items.Item("8").Specific.value = rset.Fields.Item("U_Sal").Value
    end if
    So when you click next, you can see the next record. Not the last record.
    Anoop

  • How to access BSP-Parameters in the URL in view "ICCMP_BTSHEAD/BTSHeader"?

    Dear Expert,
    I have the foloowing links:
    <Server>:Port/sap/bc/bsp/sap/crm_ui_frame/default.htm?crm-object-type=BT116_SRVTK&crm-object-action=B&crm-object-value=<GUID>&sap-client=200&sap-language=DE.
    I would like to access the parameter value "crm-object-value=<GUID>" in the view "ICCMP_BTSHEAD/BTSHeader" to do some checks before loding the view?
    How to do that?
    Is there a method or attributes of the view implementation class to do that?
    Best regards
    Ahmed Hadi

    Hi,
    You can read URL query parameters in your view(.htm) as like below:
    data: lv_guid type string.
    lv_guid = request->GET_FORM_FIELD( name = 'crm-object-value' ).
    regards
    Ismail

  • How to access GET-parameters in portal url

    Is it possible to access GET-parameters in a bsp application in an iview in the enterprise portal, and if so, how do I do it?
    If you look at the url of this post (/message/1514719#1514719 [original link is broken])
    I would like to have the value of "forumID" in the bsp application in the iview with shortlink "thread".

    Raja,
    your solution is what I was initially looking for, so thank you.
    Can you also supply a link to the article you refer to?  I can't find it:-)
    But while looking for this I found something even better, a way to pass parameters to an iview without having to define them in the iview ApplicationParameter-property.
    Apparently the trick is to add the parameter "DynamicParameter" to the url, that translates to different parameters in your bsp application(iview).
    So if you want your bsp application to have the parameters "roomid=555&date=01.01.2007" your url should be
    http://bla/irj/portal/rooms?DynamicParameter=roomid%3D555%26date%3d01.01.2007
    where %3D is the ascii representation of "=" and %26 is the ascii representation of &.
    I found this here : /message/529588#529588 [original link is broken] , but in this thread they say to separate the parameters by a ";", whereas for me it only works when i use %26 (&).
    Message was edited by: Dries Horions

  • How to access Previous Records' Data from within a Query?

    Hi All,
    I am making a report in which I need to compare my "Registration Start Date" with "Registration End Date" of previous registration of same customer. This is to check if there are gaps between any customer's registrations.
    In scenario shown below, I want to filter out RegID '1' as it comes after a gap from previous registration(RegID '3') of the same customer.
    RegID CustID Registration Start Registration End
    1 1 01/04/2005 07/04/2005
    2 2 01/03/2005 29/05/2005
    3 1 21/03/2005 29/03/2005
    4 1 01/03/2005 21/04/2005
    I created the join of this table with itself to pick previous records. it is something like:
    Current_Rec.Cust ID = Prev_Rec.CustID AND
    Current_Rec.RegStart > Prev_Rec.RegEnd
    But this gives wrong data if customer has 3 back-to-back registrations. i.e. Shows last registration in query results as their is a gap between 3rd and 1st registration. But ofcourse there was another record between these two(which was 2nd registration).
    It would be so nice of you guys if you can suggest a solution to this. Any oracle function?
    Thanks & Regards,
    Ahsan

    I Assume the following is your sample data
    Table Name: Tab1
    RegID CustID Registration_Start      Registration_End
    1      1      01/04/2005           07/04/2005
    2      2      01/03/2005           29/05/2005
    3      1      21/03/2005           29/03/2005
    4      1      01/03/2005           21/03/2005
    Note : For the Regid "4" I have changed the Registration_End to 21/03/2005. It was earlier 21/04/2005.
    Coming to the query, you need to generate the list of regid that have gaps.
    Try the following query:
    SELECT c.*
    FROM tab1 c
    WHERE c.reg_id NOT IN (
    SELECT a.reg_id
    FROM tab1 a, tab1 b
    WHERE a.cust_id = b.cust_id
    AND a.registration_end = b.registration_start
    Note: I am sorry I didn't have access to the data base to execute my query. Correct me if I am wrong.
    Regards,
    Somu

  • How to access the record data send by a procedure

    Hi I have a procedure with below code snippet..
    create package pkg
    type t_rec is recod (id number,id_name varchar2(10));
    type t_data is table of t_rec index by binary_integer;
    act_data t_data;
    procedure return_data is (o_rec out t_data,dept in number,region in number) ;
    create package body pkg
    procedue return_data is (o_rec out t_data,dept in number,region in number) is
    p_cur sys_refcursor;
    l_text varchar2(100);
    indx number:=0;
    begin
    open p_cur for 'select id,id_name from tab1'||l_text';
    loop
    fetch p_cur into o_rec(indx).id,o_rec(indx).id_name;
    exit when p_cur%notfound; --p_cur.count=0 giving error
    dbms_output.put_line('id is '||o_rec(indx).id); ---- 4
    indx:=indx+1;
    end loop;
    close p_cur;
    exception ....
    end pkg;Now ---4 is giving me values when i put value to id and id_name parameter.
    Then i try to fetch the returned value by below code
    DECLARE
    bk_data PKG.T_DATA;
    BEGIN
    PKG.RETURN_DATA(bk_data, 'parameter.pm1', 'parameter.pm2');
    dbms_output.put_line('id is '||bk_data(1).id);
    end;But it is not giving me any data and thowing error " no data found "
    Please help me how i can fetch and se the the data returned by PKG.RETURN_DATA
    Thanks in advance.
    Edited by: bp on May 31, 2012 2:56 PM

    >
    I have corrected my code as below.
    >
    No you haven't. You didn't fix the errors I mentioned.
    Worse you added new lines that have new errors.
    t_data:=&t_data -- i passed 10
    dept :&dept -- ipassd 10You added substitution variables to the package code; those are for sql*plus - not PL/SQL.
    >
    Can ypu please post the sample code that is giving you data for the sample package pkg .
    >
    If you aren't willing to post sample code why should we? The code you posted won't even compile so it can't possibly be the code you are actually using that purportedly has an error.
    exception ....That is invalid code as you undoubtedly know so what does it accomplish by adding it other than making people think your actual code was removed. But that means that the code you removed could have a problem in it that we can't see. And that means we have no hope of finding your problem because we can't see all of the code that might be causing it.
    >
    Please ignore spelling mistakes.
    >
    We can't ignore them if the code you post won't compile with them in it. The word 'procedue' you provided in the original question isn't a spelling mistake; it's because you did not cut & paste your actual code. It means that instead you manually entered text that is not code you are actually using.
    If you really want help with your problem you need to post the code that you are actually using and that is giving you the problem you are reporting.
    >
    l_text varchar2(1000):=null; -- i have built some dynamic whee clause in this variable
    >
    But are you using NULL for this value when you run your test? If not then maybe the problem is in the value that you are using. How could we possibly tell when you don't post what you are using?
    Post the code you are actually using. If you can't do that for proprietary reasons then modify it to remove the sensitive code. But the code you post has to be the code you are using and the code that is giving the problem.

  • HT1212 How to access iPad if you forgot your password.

    Have an iPad that I haven't used in month's.  Was able to update through iTunes, but during restore the transfer crashed.  iPad came up and I was able to get on and set the basic setting.
    iPad timed out and when I went to log on, will not recognized the password. 
    Is there a hard reset on the iPad that will allow me to access the device to reset the log on?

    Follow these instructions to resolve a forgotten passcode:
    http://support.apple.com/kb/HT1212

  • How to access a field of an data source w/o binding a form field to it

    Hi
      This is a query regarding ADOBE print form.
      How to access a record field (of an data source.... typical multi row records) where the record is bound to a subform.
    Data is something like
    (I have used abap parlance for understanding)
    data : begin of data_tab occurs 0,
      field1 type .....,
    field2 type .....,
    fieldm type .....,
    fieldn type .....,
    end of data_tab.
    Subform is bound to
    $.DATA_TAB.DATA[*]
    How to access field1, field2,...... etc without creating subform fields and binding them to field1, field2, .... fieldn.
    I know normal approach is to define subform fields and then bind it to $.field1, $.field2 etc
    In the calculate event of a field bound to $.fieldm I have tried the following expressions to get the value of column fieldn of the same record but none of them worked.... Note that if I bind the field using $.fieldn data is displayed properly in the print form.
    $record.data_tab.fieldn.value
    $record.data_tab.data[*].fieldn.value
    $record.data_tab.data.fieldn.value
    $record.data_tab.fieldn.value
    Otherwise I would have to define hidden fields just to use these column values in the event script even though these value are not to be displayed in the ADOBE print form.
    Regards
    Abapper

    I can't remember the exact sentence, but do a little search, as that is a common question in this forum....
    How about:
    $record.data_tab.data[1].fieldn.value
    $record.data_tab.data[2].fieldn.value
    $record.data_tab.data[2].fieldn.value
    $record.data_tab.data[N].fieldn.value
    Cheers.

  • HT5312 Hi How do i change my rescue email  address if i no longer have access to it and forgot my security answers?

    Hi How do i change my rescue email  address if i no longer have access to it and forgot my security answers?

    You won't be able to change the address until you can answer 2 of your questions - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the page that you posted from to update your rescue email address for potential future use

  • Hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    Go here.
    Good luck,
    Clinton

  • How to access FlashVars or URL Query String

    I am a bit of a rookie with Flash/AS3 and I need help trying to access FlashVars or URL in Object/Embed tags. I've searched in the Internet and the forums but cannot get my head around how to implement this.  Here is my example.
    1) ACTION SCRIPT - I have created a simple flash banner with clickable button (sparkle) with a mouse down event.
    The action script (AS3) for the button is the following:
    sparkle.addEventListener(
        MouseEvent.MOUSE_DOWN,
        function(evt:MouseEvent):void {
            var url:String = "http://www.[site_url].com/as/img.cfm";
          var request:URLRequest = new URLRequest(url);
            var variables:URLVariables = new URLVariables();
            variables.gphc = "382";
            request.data = variables;
            request.method = URLRequestMethod.GET;
          navigateToURL(request);
         *** the core issue to resolve is how to make the line above (variables.gphc = "382";) to be set dynamically.  I would like for the variable to come from the FlashVars or the URL vars
    2) OBJECT/EMBED - my object/embed code with include FlashVars and URL Query String
    <OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0" ID="bannerAD" WIDTH="728"  HEIGHT="90">
         <PARAM NAME="movie" VALUE="http://www.[site_url].com/images/imgs/flash_ad.swf?gphc=382">
        <PARAM NAME="quality" VALUE="high">
        <PARAM NAME="bgcolor" VALUE="#FFFFFF">
        <PARAM NAME="FlashVars" value="gphc=382" />
        <EMBED src="http://www.[site_url].com/images/imgs/flash_ad.swf?gphc=382" quality="high"WIDTH="728" HEIGHT="90" TYPE="application/x-shockwave-flash"  PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash" FlashVars="gphc=382" />
    </OBJECT>
    Questions that I need answered ... How do we access the FlashVars or the URL Query String?  I have found many references to loaderInfo but no clear way to implement that I'm able to understand. So if the loaderInfo is the key, where do I add in the loaderComplete() function into my action script above in #1?
    function loaderComplete(myEvent:Event)
      var flashVars=this.loaderInfo.parameters;
      gphcTextField.text=flashVars.gphc
    this.loaderInfo.addEventListener(Event.COMPLETE, loaderComplete);
    Any help is much appreciated.

    Thank you for your input.  I implemented your sugguestion in the following way without any success.  Notice below in the addEventListner that I have added the snippet of code.  Is this a good place (correct place) to set the local_var?  I did confirm that the FlashVars and URL variables were set.
    sparkle.addEventListener(
         MouseEvent.MOUSE_DOWN,
         function(evt:MouseEvent):void {
             var url:String = "http://www.[site_url].com/as/img.cfm";
             var request:URLRequest = new URLRequest(url);
             var variables:URLVariables = new URLVariables();
             var local_gphc:String = LoaderInfo(this.root.loaderInfo).parameters.gphc;
             variables.gphc = local_gphc;
             request.data = variables;
             request.method = URLRequestMethod.GET;
           navigateToURL(request);
    Thank you for your help.

  • How to access Portal URL outside of the LAN

    Hi Experts,
    Our J2EE engine is hosted on one machine and R/3 is installed on other machine (IP address is different). We have configured Web Dynpro ABAP iVIEW's and Transaction iViews in my portal. To be able to access these two iViews I have to maintain the IP addresses of both EP server and R/3 server IP's in every client host file.
    Hence my client system is in LAN it is working with no issues, but we want to access the URL form out of LAN which is not possible at the moment.
    Could anyone please advise me how to access the URL without maintaining the IP address in host file
    and
    able to access the URL out side of the LAN.
    Thanks
    Murthy

    Hi Murthy,
    Directly its not possible at all, For this you need to publish the Portal Server on Internet.
    Once its published on internet  then you can access the URL without maintaining the
    IP address in host file.
    In this your Basis Team and Network team will help you.
    Regards,
    Piyush

  • When I forgot my password for home screen and it disabled my iPod, i had to reset my iPod. My iCloud had saved all of my data such as photos in storage or something. But I do not know how to access these photos. Any ideas?

    How do i access my photos that were saved in icloud storage from before i had to reset everything. I know the photos can still somehow be accessed because icloud showed that space was being taken up for photos straight after i had reset the device and there were no photos there on the device at the time. So any ideas on how to access these photos from icloud? Any help very much appreciated, thanks.

    iCloud: Restore your iOS device from iCloud

Maybe you are looking for