How to access an url when interface has down for 5 minutes and will send an email if it has up before 5 mins (will not access url)

Question

I've tried this one before and it works, but the problem is, I would like to use full tcl, do I need 3 tcl script to do that? And is there another way to implement that 5 minutes problem? Because it looks a bit brute force to cancel the trigger occurs...
#event manager directory user policy "flash:/Test"
#event manager policy test.tcl
#test.tcl already contain the http::get
event manager environment _email_from [email protected]
event manager environment _email_to [email protected]
event manager environment _email_server [email protected]
event manager environment _email_cc [email protected]
event manager applet one
event syslog pattern "Line protocol on Interface GigabitEthernet0/0, changed state to down"
action 1.0 cli command "enable"
action 1.1 cli command "show clock"
action 2.0 mail server "$_email_server" to "$_email_to" from "$_email_from" cc "$_email_cc" subject "Test" body "$_cli_result"
event manager applet two
event tag e1 syslog pattern "Line protocol on Interface GigabitEthernet0/0, changed state to down"
trigger occurs 1 delay 60
 correlate event e1
action 1.0 cli command "enable"
action 1.6 cli command "tclsh flash:/Test/test.tcl"
event manager applet three
event syslog pattern "Line protocol on Interface GigabitEthernet0/0, changed state to up"
action 1.0 cli command "enable"
action 1.1 cli command "configure term"
action 1.2 cli command "event manager applet two"
action 1.3 cli command "no trigger occurs 1 delay 60"
action 1.4 cli command "trigger occurs 1 delay 60"
action 1.5 cli command "correlate event e1"
action 2.0 mail server "$_email_server" to "$_email_to" from "$_email_from" cc "$_email_cc" subject "Test" body "$_cli_result"

Answer 1

Okay, that clarifies things.  You will want multiple policies for this.  You can take that previous Tcl policy I posted in my last reply and change the event detector line to:
::cisco::eem::event_register_timer countdown time 300
Call this Tcl policy tm_access_url.tcl.
Then, your other policies will be:
event manager applet intf-down
 event syslog pattern "Line protocol on Interface GigabitEthernet0/0, changed state to down"
 action 1.0 cli command "enable"
 action 1.1 cli command "show clock"
 action 2.0 mail server "$_email_server" to "$_email_to" from "$_email_from" cc "$_email_cc" subject "Test" body "$_cli_result"
 action 3.0 cli command "config t"
 action 4.0 cli command "event manager policy tm_access_url.tcl"
 action 5.0 cli command "end"
Your other applet will be:
event manager applet intf-up
 event syslog pattern "Line protocol on Interface GigabitEthernet0/0, changed state to up"
 action 1.0 cli command "enable"
 action 1.1 cli command "show clock"
 action 2.0 mail server "$_email_server" to "$_email_to" from "$_email_from" cc "$_email_cc" subject "Test" body "$_cli_result"
 action 3.0 cli command "config t"
 action 4.0 cli command "no event manager policy tm_access_url.tcl"
 action 5.0 cli command "end"