How to activate BADI

Hi Experts,
I already implement BADI ZBBP_CREATE_BE_PO_NEW, but i've got problem in activating it. when i click activate button, object is activate, but if i move to other screen and back to BADI screen, object back to inactive status. please advise for this problem..
Best Regrads,
Affan

Hi,
    I think you have created an implementation for a single use BADI. In this at any point only one implementation will be active.
    You need to deactivate the other Active implementation and activate yours.
    Please check if you are getting any message while activating . (There are already implementations active)
Regards,
Srini.

Similar Messages

Activate BADI?

Hi Experts,
How to activate BADI 'Invoice_update' related to MM.
Please Suggest?
Rajiv Ranjan

Hi,
Here are the steps to Implement BADI.
1. Go to SE19. Write Implementation Name as ... ZXXXYYY
2. Then it will ask for definition name... You give 'Invoice_update' as the name.
3. Then you will go to the "Change Implementation ZXXXYYY page" in this page ...
4. Go to Interface Page
5. On interface you will see methods....
6. Double click on the method which is useful to you... like CHANGE_AT_SAVE...
7. It will open Class Builder...
8. In the class builder you will be able to access the parameters of the Method. Like here you can access Document header, G/L ac posting etc.
9. Take the useful parameters/ Modify according to your requirement and then
10. Activate the badi...
Hope this is helpful to you...If so pl. give points.

How to activate completion for PHP in TextMate or BBEDIT?

Hi, I plan to use TEXTMATE or BBEDIT to program with PHP but I don't know how to install the Bundle or the plug-in for PHP Completion. I downloaded the plug-in PHPCodecompletion.tmbu and zipped it into user/library/application support/textMate/Bundles. I don't know how it works for BBedit.
The question is: how to activate completion for PHP in TextMate or BBEDIT?
Thanks for help.
Kind regards
Mac Book Pro Core Duo Mac OS X (10.4.9)

I think you can make use of the Badi BADI_EXTEND_IDENTITY, Because this BAdi can be used based on filters and it has the methods which can let us know the before and after values of the User Indentity from the method
BADI_IDM_HR_COMMUNICATION BADI_IDM_HR_COMMUNICATION Implementation: Enhancement for Identity Management Functions
And in this implementation try top check the method IF_BADI_EXTEND_IDENTITY~PRE_MODIFY_CHECK_IDENTITY

HOW TO CREATE BADI IN ECC 6.0 with Enhanance Spot?

HI,
Anyone let me know how to create BADI in ECC 6.0 , which have mandtory to create enhanance spot before to create badi? I dont understand the concept of Enhanance Spot and what is the purpose to create that . Will u plz let me know step wise procedure to create badi ...
Thanks,
saurin.

Hi,
Implementing Business Add-Ins (BADI)
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPBSGB_HESA_NISR
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPBSGB_HESA_NISR) and double click on the method name
for example within HRPBSGB_HESA_NISR contract is a method
8. When changes have been made activate the implementation.
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
SEE THE LINKS REGARDING SPOT
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
Regards
Kiran Sure

How to find badi's

hai all.
can any one tell me briefly about finding the badi's.

Business add-ins are enhancements to the standard version of the system.
Business Add-In is a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP system based on specific user requirements.
Each Business Add-In has:
at least one Business Add-In definition
a Business Add-In interface
a Business Add-In class that implements the interface
In order to enhance a program, a Business Add-In must first be defined
Subsequently two classes are automatically generated:
An interface with IF_EX_ inserted between the first and second characters of the BADI name.
An adapter class with CL_EX_ inserted between the first and second characters of the BADI name.
The Application developer creates an interface for this Add-In.
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Have a look at http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
How to develop BADI
Best Regards,
Vibha Deshmukh
*Plz mark useful answers

How to find badi in mm module?

hi experts,
1.can anyone tell me how to find badi in mm module?
2.if anyone have some nice ppt's and pdf's on badi's,
please do mail me at [email protected]
points will be rewarded.
thanks in advance.

Hi, this may help u.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
BADI Links
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Reward if Helpfull.
Regards Madhu.

That was of someone else now i cant activate my iphone help me please how to activate my phone now .

I have forgot my apple id and password that was of someone else now i cant activate my iphone help me please how to activate my phone now .because i buy this phone form Ebay.but the guys no tell me this phone icloud is locked...so bad for me,i buy $299..how can i do?

Hello AryanRajesh,
It sounds like you do not have your Apple ID/iCloud password to activate your iPhone. I recommend resetting your Apple ID password using the steps in the following article:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to activate a CRM datasource and also to enhance

Hi experts
1. can somebody guide me how to activate a CRM datasource like in R/3 we do it in RSA5 and check it in RSA6
do we have to do the same and also any additional steps need to be performed for adapters.
2. How do we enhance the CRM datasources.
can somebody guide me with steps for the both.
thanks and regards
Message was edited by:
 Neel Kamal

Hi ,
BWA1 is for maintaince of Datasource in which scenario do we use this Tcode isit only when we do the Generic datasource.
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info (Question 4 to be specific).
Cheers,
Swapna.G
Message was edited by:
 swapna gollakota
Message was edited by:
 swapna gollakota

BI : activate BADI

Hi Experts ,
can anybody tell me the steps of how to activate the BADI FIAA_BW_DELTA_UPDATE after entering into the Tcode SE19 in R/3.and then what is the steps after that.
Kindly advise.
Thanks & regards.
M.S

Hi Arminder ,
I have understood the process of the dataflow in the below given link :
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/f4153c4eb5d82ce10000000a114084/content.htm
Getting the below error when done as per you said.
BAdI definition FIAA_BW_DELTA_UPDATE is only provided for SAP internal use
Message no. ENHANCEMENT188
Diagnosis
The BADI definition is provided for internal usage only.
System Response
No BADI implementation can be created or copied by a customer.
Kindly advise.
Edited by: M.S on Oct 20, 2009 4:03 PM
Edited by: M.S on Oct 20, 2009 4:07 PM

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
 Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
 be adjusted to this change. To adjust the dependent objects, you must perform the following actions
 the next time you activate this object.
 - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
 - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
 TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
 that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
 ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
 - Now, How do I activate something which does not exist in the first place ?
 Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to activate Events Calendar Sample Application's Weekly and Daily View?

Does anyone know how to activate the Weekly and Daily View for the sample calendar application called "Events?" I am trying to generate, or incorporate, a calendar application based upon the sample application provided by Oracle. I have installed the sample application but I am unable to view the calendar in daily or weekly formats. Any assistance would be appreciated. Thanks in-advance.

Hi,
If the calendar was set up to only use the Monthly view, then you will be missing a number of items on your page.
The simplest thing to do would be to create a new calendar page in your copy of your sample app and then identify those items that are missing from your original page. These should be Monthly/Weekly/Daily buttons, Adjust Calendar Date - Monthly/Weekly/Daily processes and a hidden Pnn_CALENDAR_TYPE page item that holds the currently displayed type.
Andy

How to activate BADI

Similar Messages

Maybe you are looking for