IDOC created in BPM, Message in SXMB_MONI = error

Hello everybody,
we generated a IDOC in BPM.
In ID we got for the corresponding IDOC-Message-Interface
a) Receiver determination
b) interface determination
c) receiver agreement
In SXMB_MONI we got the error "IDoc Interface XYZ could not be interpreted"
This error only occurs when the receiver is out R/3 system.
If we change the receiver e.g. to FTP, everything works find?
(IDOC is not standard SAP!)
Any ideas?
Regards Mario

Hi,
Make sure that you are using the idoc imported from R/3 as your interface in the configurations and not the external definition.
Also the receiver determination and receiver agreement should have the BPM as the sender service and R/3 as the receiver service.
Regards,
Smitha.
Message was edited by: Smitha Rao

Similar Messages

  • About BPM Message identification

    please,tell me how to identify a BPM message in SXMB_MONI i.e., just by looking at the message we need to tell that

    Hi,
    go to transaction SXMB_MONI_BPE...all messages under that are BPM related..
    More over u can see Integartion process name also..
    Regards
    BILL

  • File to IDOC scenario-no messages in SXMB_MONI

    Hi all,
       I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
    I am doing a File to IDOC scenario through XI mapping.
    I am not getting any messages in SXMB_MONI.
    When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
    Please help.
    My scenario goes like this:
    Sender : Business service(Some file location)
    Used File adapter for sender communication channnel.
    Receiver : Business system(SAP R/3)
    Used IDOC Adapter for receiver communication channel.
    One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
    Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

    Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
    An inbound partner profile could not be found with the following key:
    /LSDEMO/LS//DEBMAS////
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    I already manitained following data and there is one record in EDP21.
    SNDPRN  = LSDEMO  
    SNDPRT  = LS
    SNDPFC = LS
    MESTYP   =  DEBMAS
    MESCOD = space
    MESFCT = space
    TEST = space
    EVCODE   = DEBM
    SYNCHK = X
    METHOD = space
    USRTYP = space
    USRLNG = space
    INMOD = space
    DCART = space
    And please let me know whether I have to maintain outbound parameters  also for my partner in XI system.I didn't see any difference even I maintained it.
    And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
    Edited by: Jaya on Feb 26, 2010 10:17 AM
    Edited by: Jaya on Feb 26, 2010 10:27 AM

  • Message Split -- File to Idoc Scenario  -  ( Without BPM )

    I have multiple records coming to XI in a File and I have to create Multiple Idocs to R/3.
    Due to Complexity of mapping I'm splitting Maaping step into 2 message Mappings.
    A-->B
    B-->C
    In the 2nd Mapping step  I'm doing message Split meaning for each Source record I'm creating multiple Idocs ( To be precise each record on the source becomes 4 idocs in the Target.
    2nd Mapping step is as follows
    Source 1..1
      Sourcerecord 0.. Unbounded
        field1  0..1
        field2  0..1
        filed3  0..1
    Target
    Message 1
        Idoc   1.. Unbounded
          Idoc Structure..
    Message 2
          Idoc   1.. Unbounded
    Message 3
          Idoc   1.. Unbounded
    Message 4
          Idoc   1.. Unbounded
    So based on some criteria each record of Source will be mapped to 4 Messages (  1 each under each Message )
    Is it possible to do this without BPM?. Iam sending all these Idocs to same R/3 System.
    Thanks for any help..RK

    Hi,
    See the blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    <i>Basicly we have 2 ways of handling such scenarios:
    - we can use a block step and send multiple IDOCs from our BPM
    - we can also do a little trick and send multiple IDOCs from the XI without a BPM
    The first approach is a standard XI approach. It involves the use of a BPM
    so the speed of this transfer many not be very good in case you'd like to send
    hundreds or thousands of IDOCs in just one call.
    The second approach uses a little trick that was mentioned several times
    on the XI Froum by a number of XI developers but is still not very clear to the XI newbies.
    It allows us to send multiple IDOCs without the use of a BPM. Most probably this will be your choice
    if you'd like to use such 1:N (IDOCs) scenarios effectively.</i>
    Please see the bwlow threads also..
    IDOC Splitting
    File To IDOC Thru XI
    Multi-Mappings in BPM (XI 3.0)
    Please let me know , your prob..is solcev or not..
    Regards
    Chilla..

  • IDOC created with errors!

    Hello All,
    I am sure that I am not posting this in the right forum. But I did this because, I get more responses in this compared to others. Sorry if this has caused any trouble.
    I had extended a standard idoc with 2 customer segments and procesed the idoc file. An idoc got created witht he following error message.
    EDI: Syntax error in IDoc (mandatory segment missing)
    Message no. E0072
    Diagnosis
    The segment E1EDK14 has the attribute 'Mandatory' in the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
    Procedure
    Please check the IDoc or the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ).
    When we insert new segments, where should we insert? How important is the segment number? Why is this error message even though that mandatory segment is there in the idoc?
    Please help.
    Thanks,
    Lavanya

    Hi,
    I got the following error message.
    Basic type ZCHGBCK does not exist
    Message no. EA447
    Diagnosis
    IDoc type ZCHGBCK could not be found.
    Procedure
    Please enter an IDoc type that exists.
    Srinivasan,
    I had tested this with the standard idoc and it was perfect. i am having these issues after extension only.
    Thanks,
    Edited by: Lavanya Boora on Jun 2, 2008 10:55 PM

  • Split mapping created no message-how to avoid red flag message in SXMB_MONI

    Hi,
    In my scenario I'm putting files in an external server with multi mapping and a condition in graphic mapping in MM, when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no message".
    I do not want this red flag message to come.
    I see this thread:
    Split mapping created.. No message exists
    My problem is the same, "nikhil a " said that he solved the problem creating a dummy message in Message Mapping, but I don't know how to do that. Someone could explain to me?
    I do not want to use BPM.
    Thanks
    Fabio Boni

    when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no
    message".
    This is correct behavior i suppose.
    Check if you can verify the condition in the Receiver Determination itself so that the process will stop in the first step itself if Condition = false
    Even when you say that a dummy message is created, it is to be sent somewhere or if not send then again it may give an error.
    Lets see what experts have to suggest here.

  • Collect IDocs to Single Request message without BPM

    Hi Experts,
    My scenario is IDoc to SOAP.
    PI receives multiple IDoc with same message type. ECC pushed bundled IDOcs to PI via HTTP port.
    Ex: <CLFMAS>
               <IDOC1>
               <IDOC2>
               <IDOC3>
    The receiver is SOAP channel.
    I would like to achieve mentioned output structure without BPM.
    Input Structure:
    <CLFMAS>1..1
         <IDOC1> 1..999999
            <Employee>1..1
                   <EmpID1>1..1
                    <Location>0..999
                        <JAPAN>0..1
                    <Location>
                        <FRANCE>
                    <Location>
                        <BRAZIL>
         </IDOC1>
          <IDOC2>
            <Employee>
                   <EmpID2>
                    <Location>
                        <BRAZIL>
                    <Location>
                        <JAPAN>
                    <Location>
                        <USA>
            </IDOC2>
    </CLFMAS>
    Output structure:
    <RequestMessage>1..1
         <GroupListType>1..1
                 <GroupList>0..Unbounded
                      <JAPAN>1..1
                       <EmpID1>0..Unbounded
                       <EmpID2>   
                  <GroupList>
                      <BRAZIL>
                       <EmpID1>
                       <EmpID2>   
         </GroupListType>
    </RequestMessage>
    Pointers will be very helpful.
    Thanks
    Ray..
    Edited by: RayPIUS on Oct 16, 2011 6:21 AM

    HI,
      -> you  go with IDOC packaging concept.  we have three approaches collecting idocs,
           1. by using tRFC port
               we need create rfc destination(SM59) and port of tRFC(WE21) and ccreate partner profile(WE20), in partner profile we have to specify the packet size.
                then coming to PI in ID we need to create sender communication channel for IDOC there we have to provide packet size.
      2.by using XMLFILE PORT
        Please refer this blog it will help you
        Collecting IDocs without using BPM  
    3.by using XML HTTP PORT
      please go through this blog i hope this will help you
    ->  IN PI we have message packaging concept.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c?quicklink=index&overridelayout=true
    regards,
    ganesh.

  • Error creating Service Desk Message in Satellite System

    Hi all
    We have two satellite system from which I want to create a Support Message. With my current profile/role and can do it from one system and not from the other system. I get "Error in local message system, message xxx not complete". I dont think it is an Authotization fault, but not sure.
    How should the Number ranges be setup for more than one satellite system?
    Thanx
    Jaco Snyman

    Hi Tina
    This was my answer in a previuos thread:
    Hi all
    I also struggled with this for 2 weeks. But the problem is fixed.
    Do your "normal: config from the IMG and then:
    1) Make sure that you have selected for the system NOT to check for the User in SolMan
    tr: DNO_CUST04, Go to Detail, Select the field NO_USER_CHECK, "X", this is very important, otherwise you will have to create a username for everyone on the satellite system... far too timeconsuming.
    2) In your satellite system under OSS_MSG: Col1:Application: OSS_MSG, Col2: + : W. Col3: RFC Destination: SM_"SOLMANRFC"_BACK. Col4: + : CUST620. COl5: + : 1.0
    In the Solman side you maintain Col3 as "NONE".
    3) Make sure that ALL users in the satellite system has the following roles: SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN.
    4) Make sure that you have TRUSTED RFC to and from your Satellite system and Solution Manager.
    The main one to be sure of is: SAP_ALL for all SOLMANxxx user in the Solution Manager system for every satelite system, because the standard roles from SAP does not work.
    This should have your Service Desk Messaging working.
    Jaco Snyman

  • I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred.  Cannot create the required folder: ..."

    I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred.  Cannot create the required folder: ..."

    Cannot create the required folder

  • Firefox does not start in MacOS in 10.6.7. For some reason I cannot create a new profile as recommended (error message Error: Platform version '1.9.2.16' is not compatible with minVersion = 1.9.2.17 maxVersion = 1.9.2.17) further help only for windows

    tried to create new profile using Terminal but error message. cannot open in safe mode, instructions are only for windows All my bookmarks are in firefox

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • Enter Valid code,Tax Definition [Message 173-36] error while creating new posting period

    Hi Experts,
    We are not able to create posting period of 2014-15 as we are getting this error.
    Enter Valid code,Tax Definition [Message 173-36] error .Please find the enclosed error screen shot for your reference.
    Regards
    KMJ

    Hello KM Jayaprakash
    I have the same problem, but i dont see (know) the screen which i can check  "Advanced G/L account determination  check box". I am in SAP B1 9.0 PL15. Please can you publish a screen shot.
    it's urgent please.
    Thanks

  • Can't access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser no

    When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you

    Further info - I changed my security settings to allow apps from anywhere, and again tried to install.  I again got an error message
    that the update failed to install, and to contact Customer Support.

  • Unable to create titles, getting "Out of memory" error message

    I am editing a project on FCE 2.0.3.
    I recently re-opened the project after about a year. It is stored on a 500GB external firewire hard-drive. I am working on a Mac G5 Powermac 7.2 with OS 10.4.11 with 1GB of RAM. I have my system settings on FCE set at 100% for memory usage and still cache. All my system settings on FCE are set to save to the external drive. I have 16GB available on my G5 memory.
    Every time I try to create a title using Title crawl, i get this error message:
    AE Effects Error: Out of memory using "title crawl."
    Also, every time I close the project and re-open it, I have to reconnect all the media and re-render everything, even though I save the project each time. I have also Saved As a different project name multiple times and this doesn't help.
    One other issue: The titles that I have on the project already look clear when the video is paused on a frame, but when they are moving they look very low-res and pixilated. The pixilated look also happens when I output my video to a QT movie. How can I make the titles look sharp?
    Please help!
    THANKS
    -Pierre
    Message was edited by: Pierre Degaillande1

    Before you do anything, trash your preferences exactly as detailed in this link:
    http://fcpbook.com/Misc1.html
    +"AE Effects Error: Out of memory using "title crawl.""+
    Try pushing down the memory usage and still cache a lot, and see if that helps. You only have 1GB of RAM, so keeping them at 100% is not a good idea. A computer can easily use about half a gigabyte just maintaining regular processes. To make sure you don't overload your RAM, you need to set the amount of memory FCE can use to a much smaller amount.
    +"Also, every time I close the project and re-open it, I have to reconnect all the media and re-render everything, even though I save the project each time. I have also Saved As a different project name multiple times and this doesn't help."+
    Are you moving files around on your scratch disk or renaming them? If so, you will have to reconnect them every time you change things.
    +"The titles that I have on the project already look clear when the video is paused on a frame, but when they are moving they look very low-res and pixilated. The pixilated look also happens when I output my video to a QT movie. How can I make the titles look sharp?"+
    Are you looking at the fully rendered movie? Click Option-R to render everything out.

  • Need create a new control key, which message control is "error mode", then PR or PO

    Hi All,
    Can please help me I got an issue in QM ,
    Issue Description :-  Current QM control key for supplier validation date is “0001”, the message mode is only warning. PR or PO still can be created forcibly. Need create a new control key, which message control is “error mode”, then PR or PO cannot be created successfully.
    I thing should add some additional logic using BADI or USER-EXIT.
    can please help me how to find BADI or USER-EXIT if you know the appropriate BADI please let me know.
    Regards,
    Nani

    Hi,
    I tried that way I entered message control as Defect even purchase requisition is created how can I restricted purchase request ion.
    Regards,
    Nani.   

  • Trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit - setup.exe fails due to msxml3.dll error PDApp message [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154

    If anyone is able to solve this they are a genius (or I am doing something very stupid!)
    I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
    Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
    Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
    I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
    These are the FATAL messages from the PDApp log
    12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
    12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
    12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
    The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
    I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
    Is a clean install of Windows 7 + CS5.5 my only option?
    Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
    Thanks.

    Thanks for the reply kglad - much appreciated.
    I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
    Any other ideas?

Maybe you are looking for

  • Firefox stops responding. I need to exit and restart or reboot the computer.

    I do not get an error message - the application simply hangs up during the opening sequence or stops responding when open. Also, some links within web sites do not work. Example: The embedded print command for Google Maps does not work, however, the

  • View Desktop through S-Video

    I have a Power Mac G5 with an ATI Radeon 9800 video card... wondering how it may be possible to view the desktop with a S-Video output on the card. Also have Mac 10.4.11 Tiger. Thanks.

  • Service call exception; nested exception is: java.lang.IllegalMonitorStateE

    Hi All, when we try to run the Message Monitoring in our RWB then we get the following error: Service call exception; nested exception is: java.lang.IllegalMonitorStateException Has anybody of you an idea what this error occurs? Thank you for the sup

  • Mismatch between preview in wwi template and cbgl_mp01 preview

    Hello , I am getting a huge mismatch between the preview for label in wwi and the preview at the time of label printing through t-code cbgl_mp01 .Can anyone suggest me the troubleshooting techniques please . Regards, M D

  • Unable to create 04I bonds

    I am trying to create a new fixed interest bond instrument & I am getting 'Fill in all required entries' error on the ID number field.  I cecked the number ranges & the product type is associated to 10 number range which is external.  The transaction