How to activate object history ?

How to activate object history ?

Hi,
Check this thread for activating object history.
How do I activate the object history for an organizational unit ?
Regards,
Manoj.

Similar Messages

  • How to activate object in Infoset

    Dear experts,
    I have an Infoset made on a master data InfoObject (0EMPLOYEE) and a DSO. I have added a new object to the DSO (0REMARK). However I am not able to select the same for viewing in the report. The selection checkbox is deactivated. Please find the screenshot below.
    I am not able to select the InfoObject circled in red. Request the experts to please help.

    Hi Soumya,
    Newly added field will be avaiable after Adjust the infoset.
    Right Click on Infoset and press Change
    Regards
    M Ramesh

  • SCSM object history from sql cmdb

    HI.
    In this post explain how to accessing object history programmatically using the SDK  http://blogs.technet.com/b/servicemanager/archive/2011/09/16/accessing-object-history-programmatically-using-the-sdk.aspx
    I try to do this from sql query. And get trouble. Can you help me?

    You cannot write a single query to get the history of all the CIs. You have to decide which CIs you want to track as each CI has its own table and columns. They all derive from System.ConfigItem but it is a abstract class so there is no table for it.
    For example: If you want to write a report to capture the history of all Computer CIs, the tables you will be interested in will be MT_Computer, MT_Computer_Log. Then you have to compare Pre and Post columns.
    To capture what kind of change, you need to query EntityChangeLog table.
    Here is the good article that may be able to help you:
    http://www.concurrency.com/blog/service-manager-useful-queries-entity-change-log/

  • How do I activate the object history for an organizational unit ?

    Dear experts,
    we're using organizational units, positions, persons and users of the
    organizational management (Transactions PPOCE and PPOME) for
    the determination of (possible) agents in our Workflows.
    The objects seem to have an object history, at least you find such an
    option in the "find by" window on the left hand side of the maintenance
    transactions, but in our system there are no entries and I can't figure
    out how to activate history entries to be written.
    Do you ?
    Thanks in advance
    Andreas

    Hi,
    In OM all relation have a validity. I think you mean this with object history.
    If you double click an organizational unit for instance and then open the detail tab (if it wasn't open already)
    there you'll see Valid On with todays date this is the date which is used for determining the organizational structure, also you'll see No Periods with a green square to the left of the text.
    Just above the text Valid On, you'll see a button, when you click on the display periods button you can change the date to see what the relation of the object was at that time.
    You can also search the HR forum for more on organizational management.
    Kind regards, Rob Dielemans

  • How to activate all inactive objects for current user

    Hi
    How to activate all inactive objects for current user ...
    ... I have found a (long winded) way to do this:
    - Environment / Inactive Objects
    - Add to Worklist
    - Display Worklist
    - Select All
    - Activate
    this will open a dialog titled "Inactive Objects for <username>"
    which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
    the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
    does anybody know the TCode for this dialog?
    thanks
    ps does the term "mass activation" apply to importing change requests rather than development activation?
    Edited by: FireBean500 on Jun 4, 2010 11:07 PM

    No other way. But usually it's far more simple as all objects are already in our own worklist.
    I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

  • PR05 - How to activate a Function in the Object Services Toolbox

    Hi,
    How do I activate a function in the Object Services Toolbox?
    In transaction PR05 (Travel Expense Manager) select any trip and then click on 'Change'. This takes you to the screen for the individual trip.
    On the top left of the screen is the 'Object Services Toolbox'.
    If I drop down on this list then select 'Create' there are 5 options under 'Create' i.e. 'Create attachment', Create Note', 'Create External Document', 'Store Bus. Doc', and 'Enter Bar Code'.
    The 'Enter Bar Code' is deactivated. I would like to know how to activate this.
    Thank you.
    Warren.

    no idea

  • How to activate a function in the Object Services Toolbox of PR05

    Hi,
    In transaction PR05 (Travel Expense Manager) select any trip and then click on 'Change'. This takes you to the screen for the individual trip.
    On the top left of the screen is the 'Object Services Toolbox'.
    If I drop down on this list then select 'Create' there are 5 options under 'Create' i.e. 'Create attachment', Create Note', 'Create External Document', 'Store Bus. Doc', and 'Enter Bar Code'.
    The 'Enter Bar Code' is deactivated. I would like to know how to activate this.
    Thank you.
    Warren.

    I think you need to check for IMG transaction code OAC5 & OAC3 and also check IMG configuration setting under
    Application server-->basis services > Archive Link> customizing incoming documents--> bar code scenarios
    a®

  • How to see version history of changes of a design or configuration object.

    Hi All,
    Is it possible to see a version history of the changes of a particular design or configuration object?
    If so then please let me know, how we look that?
    Regards,
    Soorya

    Hi,
    U have to check all the versions,modified date ,type(created,change) in all the developed objects history.Select any developed object like data type,message type, mapping,interface mapping in IR   and also in ID Objects.Select developed object,then go to its menu ,then select __History__.it shows all the information about that object.
    Thanks
    Ravi

  • How to Activate the Table which Doesn't Exist - Can I create Table in SE11

    Hi Gurus,
    I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of  the SAP Component, I get the following error message ( usr\sap\trans\log ) :
    Phase Import_Proper
    >>>
    SAPAIBIIP7.BID
    1 ED0301 *************************************************************************
    1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
    1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
    1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
    1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
    2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
    2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
    2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
    2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
    2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
    2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
    2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
    <<<
    Now, I checked Domain WRMA_KAPPL  in SE11 and it diplays that it is partially active :
    " The obeject is marked partially active for the following reasons :
       Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
       be adjusted to this change. To adjust the dependent objects, you must perform the following actions
       the next time you activate this object.
                        - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
    My question is - how to activate this SYNP Time Stamp.. ?
                          - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                            TCode..
    Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
    Thanks,
    Regards,
    - Ishan
    >> Ok, Now I forcefully activated the Domain and then all the 5  Data Elements in SE11 ...now I have error
         that table  WRMA_S_RESULT_DATA  and WRMA_TT_UPDTAB_DSO Could not be activated...
         ..And in SE11 > Input the first / Second Table  > Excute > Output : Table Does not Exist !!!
          - Now, How do I activate something which does not exist in the first place ?
        Any Input about this ?
    Thanks,
    Regards,
    - Ishan
    Edited by: ISHAN P on Jun 19, 2008 3:44 PM

    Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
    The error occurs in Release BI_CONT 703 Support Package 9.
    If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
    1. Use transaction RSA1 to call the Data Warehousing Workbench.
    2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1.  You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display".  Proceed as follows if the InfoObject is still not active:
    3. Go to BI Content activation.
    4. Select "Object Types".
    5. Open the "InfoObjects" tree and select "Objects".
    6. Search for the InfoObject 0TCTLSTCHG and select it.
    7. Transfer the object and activate it.
    These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
    Jacek Fornalczyk

  • Acrobat 9 Pro Extended: How to activate logfiles?

    Dear members
    Does  someone now how to activate or read out logfiles of a 3DPDF conversion? 
    I would  like to convert Catia V5 data via command line, but cannot find or  activate logs...
    Currently I'm only using the OLE objects "AcroExch.AVDoc" and  "AcroExch.App". In the API reference at livedocs.adobe.com there is  nothing about it.
    Thanks in advance for your help.
    Regards
    hanseat82

    That's clear, we are calling the Acrobat over OLE via Perl, scrap:
    use Win32::OLE;
    $infile = $ARGV[0];
    $outfile = $ARGV[1];
    $NOSAVE = -1;
    $PDSAVEFULL = 1;
    ## Create Objects
    $avdoc_obj = Win32::OLE->new('AcroExch.AVDoc') || die "new: $!";
    $app_obj = Win32::OLE->new('AcroExch.App') || die "new: $!";
    ## Open Inputfile
    $avdoc_obj->Open($infile, $infile);
    ## Get PDF Document as Object from Inputfile
    $pddoc_obj = $avdoc_obj->GetPDDoc();
    And I found the Java code from you, Adobe:
    #            catch (ConversionException e)
    #                System.out.println(e.getErrorCode());
    #                System.out.println(e.getConversionLog());
    Can you give me name me the import module of class "ConversionException" or in general how to go on with that?
    Thanks and regards
    hanseat

  • How to delete object in Integration Repository SAP PI 7.0

    how to delete object in Integration Repository SAP PI 7.0

    Hi Rashmi,
    Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
    Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    Re: How to delete/remove the software component from integration repository
    Thanks,

  • How to activate Image, Pdf, Hyperlink and Scale Prices in SRM-MDM

    Hi Experts,
    I have requirement to activate the following features:
    1. Image
    2. PDF
    3. Hyperlink
    4. Scale Prices
    These should be activated and should be available in the current business' internal catalogs so that users could be able to easily identify the item they want to create.
    Does anyone know the steps on how to proceed on these?
    I have read and researched about this and I found out that objects should be imported in Data Manager and the link between items should be mapped in Import Manager.
    I tried this first in Image, I was able to successfully import image. I tried adding the link first in existing item in data manager by right click on the Image field->Add/Link New... -> I was brought to the screen where I should add the image again, so I added ti again and there I was able to link the image and the item.
    I understand that for the image to be available in the end-user's internal catalog screen, I should modify UI Configuration. So I added the Image field by going to Customize Display Tab-> and adding it in the Item Lists, Cart Preview, Compare, Item details radio button. But when I checked on end-user's internal catalog screen, Image column is still not there.
    I believe PDF and Image has the same process. But how could I add the link between image and item for the entire catalog items?
    Please also help on how to activate the Hyperlink and Scale price functionality.
    Thank you so much!

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • How to Activate GOS button in HR transactions like po13,pp02,pp01 etc

    Hi guys,
    Can you please help, could you please give me so guyide lines on how to activate the GOS button in HR transactions like po13,pp01,pp02 etc. The GOS button is not visible at all in our system. I have rad various threads but they all assume that the button is visible. My requirement is activate it so that it becomes visble.
    We would like to attach .doc.xls.pdf documents against various OM objects hence the need to activate the GOS button.
    Thank you.
    Andy

    Hello Andy,
    I found your post in another thread and I replied there.  So I only add the link:
    Attach PDF to position
    Anyway I was wondering so far if you did selected any HR object in PO13 or PP01 to make sure taht GOS button doesn't appear?  GOS button is shown only if you select an HR objects in those tcode.  (cfr the link above for screenshot).
    regards
    Hadrien

  • Cannot Activate Objects in ESR and ID

    Hi ,
    I am unable to activate objects in ESR and ID ,while trying to activate the objects ,i am getting a pop up window
    saying "Object being currently used by user".please how to fix this.

    Hi Sagar,
    use below link to unlock the objects using below link,
    http://host:port/rep/support/public/LockAdminService
    or
    start up page -> administrator-> Lock overview and unlock your objects.
    Thanks
    Hari

  • How to view the History of a Crystal Reports iView in EP6?

    How to view the History of a Crystal Reports iView in EP6?
    Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
    I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
    Our users would prefer to see a listing of the past runs of the report and choose which report to view.  What parameters need set in the EP6 iView to see the history of a report?

    Hi Heather,
    it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
    the link to our developer library :
    http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
    hope this helps
    Ingo

Maybe you are looking for