How to add 1 field in T-code FB03 screen using badi???

hi~
I need advice...
How to insert a field in standared screen by BADI??
I want insert a segment field in AP/AR screen when user create post document(or park document)..
is it possible??
AP/AR screen are not using IMG...( right??? )
please help me...
thanks...

Hi Lee,
Good!
First we need to find out whether is there any screen exit for that particular screen or not?
If not we could go for BADI
Thanks
Sunil

Similar Messages

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

  • How to add the field sapcomponent in fast entry screen

    Hi ,
    This is reg the support message which is created using crmd_order.
    I have a requirement in which the field  sapcomponent in the transaction tab which
    has to be placed in the fast entry tab also.On populating this in the fast entry screen the same value
    should also be populated in the transaction tab.
    Guide on how to create the field in the fast entry screen and how to link it with the transaction tab.
    Step by step procudure to achieve this is appreciated.
    Regards,
    srikanth.

    Hi Ana,
    Greetings and Good Morning.
    We are currently going through the implementation of electronic nota fiscal in R/3 and have already implemented the old data sources and BCT for the same. Do you have any idea for enhancing the new data structures. Looks like you have gone through this recently.
    Do you have a new BCT available for the same.
    Kindly send me some info.
    Thanks
    regards
    MS

  • How to add new fields in sap copied standard form using itcsy structure

    hi guys,
      i want add some fields in sap script copied standard form using itcsy structure.
    let me know the procedure with any example.
    thanks,
    anitha.

    Hii anitha
    plz c code below
    Syntax goes like this
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    Example:
    In script form
    /: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
    /: USING &EKKO-EKORG&
    /: USING &EKPO-WERKS&
    /: USING &EKKO-EKGRP&
    /: USING &EKKO-BSTYP&
    /: CHANGING &COMPNAME&
    /: CHANGING &SENDADR&
    /: CHANGING &INVCADR&
    /: CHANGING &COMPADR&
    /: CHANGING &COVERLTR&
    /: CHANGING &SHIPADR&
    /: CHANGING &REMINDER&
    /: CHANGING &REJECTION&
    /: CHANGING &POSTADR&
    /: CHANGING &LOGO&
    /: ENDPERFORM
    In program
    FORM Read_texts - To extract the standard texts from the table *
    FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA : L_EKORG TYPE EKORG,
    L_WERKS TYPE WERKS_D,
    L_BSTYP TYPE BSTYP,
    L_EKGRP TYPE BKGRP.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
    CHECK SY-SUBRC = 0.
    L_EKORG = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
    CHECK SY-SUBRC = 0.
    L_WERKS = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
    CHECK SY-SUBRC = 0.
    L_EKGRP = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
    CHECK SY-SUBRC = 0.
    L_BSTYP = IN_PAR-VALUE.
    CLEAR Z08M1_ORG_TEXTS.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = L_BSTYP.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = SPACE.
    ENDIF.
    READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SENDADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'INVCADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COMPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REMINDER'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REJECTION'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'POSTADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'LOGO'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    reward points if useful
    regards
    Jaipal

  • How to add New fields to Customer Master Record Screen

    Hi All,
    As per our business requirment we need to add some new fields the BP screen.
    Could you suggest me how can I customize the new fields in BP creation screen.
    I change the screen sequence with the help of VCT, but I need to add some more new fields. Your suggestions will be highly appreciated.
    Thank you and Best regards

    Venkat,
    Your best bet is to read the documentation at:
    http://help.sap.com/saphelp_crm40/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm
    This gives you an overview of the Easy Enhancement workbench.
    Your steps to use it will be the following setup the customizing in transaction EEWC.  You can search this forum for help on how to setup this customizing.
    Then create the new extension using transaction EEWB, and follow the steps in the help documentation above, also read note: 484597.
    After you have read the doucmenation, and if you get stuck, then let me know and I will try to answer those questions.  The EEWB is very simple, so I don't think you will have too many problems using it.
    Good luck,
    Stephen

  • VL01NO : how to add two fields

    Hi,
    Is there any possibility to add two fields (Format text) for Tcode : VL01NO because i want to enter two other informations ?
    Please help
    Regards.

    Hi jehade el aoumari  ,
    We can add the fields with the help of screen exits (BAdis) provided that , SAP has giving the feature to add to this particular transaction. This is work of ABAPer and they will add the fields , and they will popullate the appropriate database table as well.
    But pls tell me what exactly is your requirement so that we will let you know whether the option is available or not.
    Regards,
    Vvieks

  • Query: How to add new fields in ABAP query?

    Hi All,
    Can any one tell me how to add new fields in the ABAP query output?
    We have to add the new fields using query design or we have
    to add those in the background program(automatically generated behind query) by selecting new fields in the code?

    What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

  • How to add new fields to the system form (Ex.expenses to a/r invoice form)

    hi
    can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
    i want to add expenses field to system a/r invoice form and connect data base also.
    i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
    reply soon plz..
    thankQ

    If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

  • How to add new fields to the DME file in F110

    Hi,
    We have a requirement add new fields to the file that is used in  F110.
    .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
    Can anybody please help me in resolving the issue.
    Thanks
    Venkat
    Edited by: Venkat R on Jun 8, 2009 8:45 AM

    Hi,
    There is no function module for that, We have created our own function module and attached to that field.
    Refer the below code. This will fetch the document number.
    DATA: lwa_item   TYPE dmee_paym_if_type,
            l_fpayp   TYPE fpayp,
            l_fpayhx TYPE fpayhx,
            first_flag TYPE c,
            lv_lifnr   TYPE lifnr,
            voucher_id TYPE string,
            voucher TYPE string,
            invoice_id TYPE belnr_d,
            voucher_len1 TYPE i,
            voucher_len TYPE i.
      TYPES:
      BEGIN OF lt_regup,
            xblnr TYPE xblnr1,
            belnr TYPE belnr_d,
      END OF lt_regup.
      DATA: lt_regup TYPE STANDARD TABLE OF regup,
            lv_regup TYPE regup.
    Hope this helps.
    Raja.A
    Edited by: Raja.A on Feb 16, 2011 7:17 PM

  • How to add a field to the selection screen and when the user enters ...

    hi all,
    can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT.  Thanks.

    Hi Kripa,
       If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
    SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
    PARAMETERS: n_in_en  RADIOBUTTON GROUP g1,
                q_ev  RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK mysel.
    SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
    PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
    SELECTION-SCREEN END OF BLOCK mysel1.
    SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
    PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
               c_no(10) TYPE c DEFAULT '9D0161',
               u_id(15) TYPE c,
               password(15) TYPE c,
               r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
    PARAMETERS:t_run TYPE c  AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK mysel2.
    SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
    SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
    PARAMETERS: p_ser  RADIOBUTTON GROUP g2,
    a_ser  RADIOBUTTON GROUP g2.
    SELECTION-SCREEN END OF BLOCK mysel4.
    SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
    PARAMETERS:p_path TYPE string.
    SELECTION-SCREEN END OF BLOCK mysel5.
    SELECTION-SCREEN END OF BLOCK mysel3.
    u will get this additional screen after the screen of ldb.
    I hope this will help u..
    Thanks & Regards
    Ashu Singh.

  • How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

    Hi Experts,
    How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
    I have no idea how to start with, please give some advice.
    Thanks!
    Ice

    Dear Ice,
    Use Append structure, see given link:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    Regards,
    Abbas.

  • How to Add IBAN Field in the Bank Details Infotype?

    Hello All,
    I need to know the procedure for How to add IBAN field in the bank details infotype?
    Could anyone help me please.
    I m new to SAP HR.
    Immediate help will be appreciated.
    Thanks.
    Regards,
    Mudassir.Imtiaz

    Hi mudassir,
    For IBAN implementation:
    1. Implement SAP Notes 925410, 1409674, 1405521
    2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
    For Turkey we've added the following entry (depends on country) :
    00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
    3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
    4. Go to table T77S0 and make value of ADMIN IBAN entry S.
    Regards,
    Dilek

  • How to add new field into dynamic internal table

    Hello Expert.
    how to add new field into dynamic internal table.
    PARAMETERS: P_TABLE(30).    "table name
    DATA: I_TAB TYPE REF TO DATA.
    FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
    *Create dynamic FS
    create DATA I_TAB TYPE TABLE OF (p_table).
      ASSIGN I_TAB->* TO <TAB>.
    SELECT * FROM (p_table) INTO TABLE <TAB>.
       here i want to add one more field into <TAB> at LAST position and my 
       Field name  =  field_stype     and
       Field type    =  'LVC_T_STYL'
    could you please helpme out .

    Hi,
    Please find the code below.You can add the field acc to your requirement.
    Creating Dynamic internal table
    TYPE-POOLS: slis.
    FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,  u201C Dynamic internal table name
                   <fs_dyntable>,                     u201C Field symbol to create work area
                   <fs_fldval> type any.              u201C Field symbol to assign values 
    PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
    DATA:   t_newtable TYPE REF TO data,
            t_newline  TYPE REF TO data,
            t_fldcat   TYPE slis_t_fldcat_alv,
            t_fldcat   TYPE lvc_t_fcat,
            wa_it_fldcat TYPE lvc_s_fcat,
            wa_colno(2) TYPE n,
            wa_flname(5) TYPE c. 
    Create fields .
      DO p_cols TIMES.
        CLEAR wa_it_fldcat.
        move sy-index to wa_colno.
        concatenate 'COL'
                    wa_colno
               into wa_flname.
        wa_it_fldcat-fieldname = wa_flname.
        wa_it_fldcat-datatype = 'CHAR'.
        wa_it_fldcat-intlen = 10.
        APPEND wa_it_fldcat TO t_fldcat.
      ENDDO. 
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = t_fldcat
        IMPORTING
          ep_table        = t_newtable. 
      ASSIGN t_newtable->* TO <t_dyntable>. 
    Create dynamic work area and assign to FS
      CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
      ASSIGN t_newline->* TO <fs_dyntable>.
    Populating Dynamic internal table 
      DATA: fieldname(20) TYPE c.
      DATA: fieldvalue(10) TYPE c.
      DATA: index(3) TYPE c. 
      DO p_cols TIMES. 
        index = sy-index.
        MOVE sy-index TO wa_colno.
        CONCATENATE 'COL'
                    wa_colno
               INTO wa_flname. 
    Set up fieldvalue
        CONCATENATE 'VALUE' index INTO
                    fieldvalue.
        CONDENSE    fieldvalue NO-GAPS. 
        ASSIGN COMPONENT  wa_flname
            OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
        <fs_fldval> =  fieldvalue. 
      ENDDO. 
    Append to the dynamic internal table
      APPEND <fs_dyntable> TO <t_dyntable>.
    Displaying dynamic internal table using Grid. 
    DATA: wa_cat LIKE LINE OF fs_fldcat. 
      DO p_cols TIMES.
        CLEAR wa_cat.
        MOVE sy-index TO wa_colno.
        CONCATENATE 'COL'
                    wa_colno
               INTO wa_flname. 
        wa_cat-fieldname = wa_flname.
        wa_cat-seltext_s = wa_flname.
        wa_cat-outputlen = '10'.
        APPEND wa_cat TO fs_fldcat.
      ENDDO. 
    Call ABAP List Viewer (ALV)
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          it_fieldcat = fs_fldcat
        TABLES
          t_outtab    = <t_dyntable>.

  • How to add more fields at level task for importing to MsProject

    Hi everyone,
    We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
    The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
    Does anyone knows how to add more fields for importing at the cProjects side?
    Thanks a lot,
    CAMILO URIBE

    Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
    mapping of the same nuember of fields.

  • How to Add parameter fields in BI publisher fields

    Hi,
    I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
    So i got the XML file from output of the report.
    Then i added the xml data in BI publisher and then i have created the .rtf for that.
    Here i need to add some fields which is not available in fields list (in BI Publisher).
    How to add that fields, or is possible to add fields manually.
    That fields are given as parameters while running the .rdf file.
    Please tell me how to solve this problem.
    Is possible to add fields manually means tell me how to do that.

    If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
    <?param@begin:P_CONC_PARAM?>
    and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

Maybe you are looking for