How to add the field sapcomponent in fast entry screen
Hi ,
This is reg the support message which is created using crmd_order.
I have a requirement in which the field sapcomponent in the transaction tab which
has to be placed in the fast entry tab also.On populating this in the fast entry screen the same value
should also be populated in the transaction tab.
Guide on how to create the field in the fast entry screen and how to link it with the transaction tab.
Step by step procudure to achieve this is appreciated.
Regards,
srikanth.
Hi Ana,
Greetings and Good Morning.
We are currently going through the implementation of electronic nota fiscal in R/3 and have already implemented the old data sources and BCT for the same. Do you have any idea for enhancing the new data structures. Looks like you have gone through this recently.
Do you have a new BCT available for the same.
Kindly send me some info.
Thanks
regards
MS
Similar Messages
-
Add the custom infotype in Fast entry screen
Dear All,
I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode means it's only display mode ..
Kindly help me to fix this issueees.
thanks
Regards
Sandeep DabralHi Sandeep,
Can you share the steps to create fast entry screen to custom infotype? Also is it possible to create custom TCODE to access this instead of PA70? -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
How to add the fields into combo ?
Hi,
I want to add the table fields into combo box. Now I am able to getting the columns from table but I don�t know how to add that columns in combo box.
My jsp getting the columns from table.
function metadata(){
try {
Connection con = null;
Class.forName("oracle.jdbc.driver.OracleDriver") ;
con = DriverManager.getConnection("jdbc:oracle:thin:@10.60.4.25:1521:clopaydb","scott","tiger");
String query = "SELECT * FROM emp";
DatabaseMetaData dma = con.getMetaData ();
Statement stmt = con.createStatement ();
ResultSet rs = stmt.executeQuery (query);
ResultSetMetaData rsmd = rs.getMetaData ();
int i;
int numCols = rsmd.getColumnCount ();
for (i=1; i<=numCols; i++) {
if (i > 1) System.out.print(",");
System.out.print("\nThe Table Column list "+rsmd.getColumnLabel(i));
rs.close();
stmt.close();
con.close();
catch (Exception ex) {
ex.printStackTrace ();
}Please give me a sample code for add these items into combo. (I need JSP sample code )
Thanks & Regards,
Merlin Roshinafunction metadata(){
try {??
Are you sure on this ? Dont mix javascript function with a java method.
Make a java bean and your method may return an ArrayList.
In your JSP ..
<select name="yourComboBox">
<%
// Make a For Loop for the arraylist
String columnLabel = (String ) arrayList.get(i);
<option value="<%=columnLabel%>"><%=columnLabel%></option>
<%
} // end bracing of for loop
%>
</select>
Post your code based on the directions above then we can help you more on this if reqd.
Probably you should look up into sample JSP ..JDBC sample codes on google.
-Rohit -
How to add the fields to the transaction 'Z10SD25' using ABAP Query
Hello,
I want to add the new fields like 'From' and 'To' depending on some conditiions. But i have to do this using ABAP Query.
Can any one help me with this as I am not much aware of ABAP Query .
Regards,
DarshanaHi,
ABAP/4 query can be designed in four steps
1. Creation of a user group
2. Creation of Infoset
3. Assignment of user group to Infoset
4. Creation of the query based on Infoset
By executing the transaction codes mentioned below
u2022 SQ01 ABAP/4 Query
u2022 SQ02 Infosets
u2022 SQ03 User group
Step 1: To create an Infoset without a logical database
One of the following can be selected
u2022 Based on a single table
u2022 Using an ABAP/4 program
u2022 Using Table Joins
u2022 Using Sequential Dataset
NOTE: The tables to be used in the join should have at least one field in common i.e. it should have the same name, domain or data element.
Step 2: Here you specify the users who should be authorized to run the query. A user group is always associated with a Infoset.
Step 3: In Query Definition you can define the Selections Screen. Here you can check against the fields(fields from the tables specified in the infoset above) that you require to be shown on the selection screen.
Now we Finally need to specify the output type for the query as Basic List, Statistics or Ranked List. Choose the option Basic List and also select the fields to be displayed in the output list(in your case from and to fields...)
After providing all the above options you can save the query and execute it by clicking the Execute button twice.
Hope this helps
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Sep 15, 2009 12:44 PM -
How to set the fields invisible/visible dynamically with screen-exits
<b>Goal:</b> I am changing the subscreen from standard screen for mobile device interface, i.e. function group LMOB. With a scanner I am to read a material number and have it confirmed by the SAP system. For this I need an input field which is already supplied by the standard program. The users require the screen to be dynamic, i.e. I can not do the settings in the screen-painter.
<b>Problem occurred:</b> After I have changed to use the customized subscreen 1202 in function group XLRF, not all the fields are displayed. It seems that the values for setting the screen elements are lost when calling the subscreen (3202, copy of screen 2202). For instance, it does not show my input field. Somewhere there need to be a list that contains all these parameter switches? I know how Loop at screen works but cant find the values that are supposed to be passed over to the subscreen.
Would be grateful for some help.Hi Niklas!
Unfortunately I don't know the transaction you're working on, but I had a similar problem once.
You have to use the commands <b>LOOP AT SCREEN</b> and <b>MODIFY SCREEN</b>. I found some online help here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dba70535c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. The fields of the pseudo-table <b>SCREEN</b> can be found here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. I think you have to set <b>INVISIBLE</b> to 'X' - but you may have to experiment.
Another thing to look out for is that you have to call this method in the <b>PBO</b> section of the dynpro. Take care no SAP logic is executed after your modification that changes your settings...
Hope this helps (please reward me if it does),
Joerg -
How to add 1 field in T-code FB03 screen using badi???
hi~
I need advice...
How to insert a field in standared screen by BADI??
I want insert a segment field in AP/AR screen when user create post document(or park document)..
is it possible??
AP/AR screen are not using IMG...( right??? )
please help me...
thanks...Hi Lee,
Good!
First we need to find out whether is there any screen exit for that particular screen or not?
If not we could go for BADI
Thanks
Sunil -
How to add New fields to Customer Master Record Screen
Hi All,
As per our business requirment we need to add some new fields the BP screen.
Could you suggest me how can I customize the new fields in BP creation screen.
I change the screen sequence with the help of VCT, but I need to add some more new fields. Your suggestions will be highly appreciated.
Thank you and Best regardsVenkat,
Your best bet is to read the documentation at:
http://help.sap.com/saphelp_crm40/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm
This gives you an overview of the Easy Enhancement workbench.
Your steps to use it will be the following setup the customizing in transaction EEWC. You can search this forum for help on how to setup this customizing.
Then create the new extension using transaction EEWB, and follow the steps in the help documentation above, also read note: 484597.
After you have read the doucmenation, and if you get stuck, then let me know and I will try to answer those questions. The EEWB is very simple, so I don't think you will have too many problems using it.
Good luck,
Stephen -
How to add additional field " SEGMENT" in the FBL5N Report
Hello ,
The Requirement is we need add the field " Segment" in the Report FBL5N.
Could you please advice How to add the field " Segment" to the FBL5N Report.
Thanx & Regards
RameshHi,
try SAPNET note 373268.
Best regards, Christian -
How to add new field XREF3 in FB50
Hi,
I have a problem with adding the new field XREF3 in FB50 transaction in Items window. I configured field status group in OBC4 and OB41 transaction for XREF3 as optional entry. XREF3 is available in FB01 transaction but not in FB50. I checked table settings for Item window in FB50 using Administrator button. Field XREF3 is not displayed in current settings window. I checked also that structure ACGL_ITEM include the field XREF3. Can you give me any advice how to add the field XREF3 in this enjoy transaction FB50 ?
Thanks in advance.
Zbigniew Debowskihi,
start FB50!
at the upper right corner of the items, there is a small coloured box (blue, yellow and white), click on it
click Administrator in the popup
search for XREF3 in the list, the field Invisible (last coloum) should be ticked, untick it!
click Activate, than Close, than Close again
hope this helps
ec -
How to sort the fields in ABAP query.
Hi all
I am not able to drag the fields in Sort tool box.
Please help me how to add the fields in Sort tool bar.
Regards
GangiIn SQ01, when we are creating a query, we can define the default sort sequence & Totals also.
This can be done when defining the basic list. -
Special Gl indicater in Fast entry screen
Hi experts,
Is it possible to add the Special gl indicater field in Fast entry screen in O7E6, i have already checked in the Possible Fields, spl. gl is not available.
so please guide me how to add the field in possible fields(with technical names)
I want to pass the customers related entries through fast entry screen
regards
sai krishnaIn the standard layout fields, it is not available.
-
How to add custoim fields on the additiondata b tab of va01 and va02
Hi All,
i want to add the field on the Additional data B tab of the VA01 and VA02 at header level.
Already one field is there now i want to add one more field.How to proceed.
I think i have to go with screen exits.Can you help me in proceeding further and where should i write the code.
It is urgetn.Please help meI have to move the updated fields to the vbak table
The code is like this
If VBAK-ZZGrswgh less than ZTRKLMT-ZZweight OR
VBAK-ZZCubTot less than ZTRKLMT-ZZCube OR
VBAK-ZZPaltot less than ZTRKLMT-ZZPallet
CLEAR VBAK_ZZTRKLMT.
Else
MOVE X TO VBAK_ZZTRKLMT.
End if
should i write this code in the USEREXIT_MOVE_FIELD_TO_VBAK of program MV45AFZZ ?
This user exit should trigger when
VBAK-AUART Equals 'ZWH' OR
VBAK-AUART Equals 'ZFV'
Reply soon -
How to add the date field in the dso and info cube
Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KKmy prob is solved
KK -
How to add the Match code object for the requisitioner field in TCODE ME51N
Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajeshdon't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton
Maybe you are looking for
-
Downloads to block viruses?
looking for downloads to block viruses and malware?
-
I accidentally opened all my downloads in text. how can i change my settings to normal?
can someone please help me change my settings to normal? i some how opened it in text and everything i try to download from safari opens in text such as music ect please help much appreciated
-
How can I display a multiple grid panels into columns of grid panel
I have a GridPanel "grid". It is set to four columns. And I have Gridpanel elementGrid in which I have components such us button ,OutputText ,.. .And I load the gridPanels elementGrid into "grid" using this. List<UIComponent> childComponents=new Arra
-
Open delivery not showing in VL06 T.code
Dear Guru, some of the Open delivey document is not showing in vl06 t.code. what may be the reason. Regards Preet
-
Hi, Does anyone know how to allow the customers to choose the sort order of some pages? I don't know about you, but I shop online a lot. Whenever I go to the sale page if I feel like buying something but I know I don't really 'need' anything, I alway