How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
list in IIS and POSH I would be super happy! :|
I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
Thanks for the help in advance guys, take care!
br4tt3

Hi and thanks for the suggestions!
Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
loaded into that shell;
$certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
New-Object : Cannot load COM type IIS.CertObj
From an IIS perspective I have the following components installed;
[X] Web Server (IIS)                                    Web-Server
    [X] Web Server                                      Web-WebServer
        [ ] Common HTTP Features                        Web-Common-Http
            [ ] Static Content                          Web-Static-Content
            [ ] Default Document                        Web-Default-Doc
            [ ] Directory Browsing                      Web-Dir-Browsing
            [ ] HTTP Errors                             Web-Http-Errors
            [ ] HTTP Redirection                        Web-Http-Redirect
            [ ] WebDAV Publishing                       Web-DAV-Publishing
        [X] Application Development                     Web-App-Dev
            [ ] ASP.NET
Web-Asp-Net
            [X] .NET Extensibility                      Web-Net-Ext
            [ ] ASP
Web-ASP
            [ ] CGI
Web-CGI
            [ ] ISAPI Extensions                        Web-ISAPI-Ext
            [ ] ISAPI Filters                           Web-ISAPI-Filter
            [ ] Server Side Includes                    Web-Includes
        [ ] Health and Diagnostics                      Web-Health
            [ ] HTTP Logging                            Web-Http-Logging
            [ ] Logging Tools                           Web-Log-Libraries
            [ ] Request Monitor                         Web-Request-Monitor
            [ ] Tracing
Web-Http-Tracing
            [ ] Custom Logging                          Web-Custom-Logging
            [ ] ODBC Logging                            Web-ODBC-Logging
        [X] Security
Web-Security
            [ ] Basic Authentication                    Web-Basic-Auth
            [ ] Windows Authentication                  Web-Windows-Auth
            [ ] Digest Authentication                   Web-Digest-Auth
            [ ] Client Certificate Mapping Authentic... Web-Client-Auth
            [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
            [ ] URL Authorization                       Web-Url-Auth
            [X] Request Filtering                       Web-Filtering
            [ ] IP and Domain Restrictions              Web-IP-Security
        [ ] Performance                                 Web-Performance
            [ ] Static Content Compression              Web-Stat-Compression
            [ ] Dynamic Content Compression             Web-Dyn-Compression
    [X] Management Tools                                Web-Mgmt-Tools
        [X] IIS Management Console                      Web-Mgmt-Console
        [X] IIS Management Scripts and Tools            Web-Scripting-Tools
        [ ] Management Service                          Web-Mgmt-Service
        [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
            [ ] IIS 6 Metabase Compatibility            Web-Metabase
            [ ] IIS 6 WMI Compatibility                 Web-WMI
            [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
            [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
    [X] FTP Server                                      Web-Ftp-Server
        [X] FTP Service                                 Web-Ftp-Service
        [X] FTP Extensibility                           Web-Ftp-Ext
    [ ] IIS Hostable Web Core                           Web-WHC
More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
able to reference the IIS.CertObj object.
Br4tt3 signing out...
br4tt3

Similar Messages

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly.
Can you please help me with this problem immediately? Reply soon...

Hi RajeshPujara,
Please refer the link below to know the paper size supported by this printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
May I know the size of paper you are trying to print.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to add the zorin os and domain server 2008

Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it.
Here is some more information: http://askubuntu.com/questions/33592/how-do-i-join-a-windows-active-directory.

how to add the zorin os and domain server 2008
kindly help as
This topic first appeared in the Spiceworks Community

How to add a service account in SQL Server to display the "Service Account Name" and "Display Name"

Can someone
help with steps on how to add the following in SQL Server 2012 environments?<o:p></o:p>
"Service Account Name" and "Display Name"<o:p></o:p>
Your help will be greatly appreciated.<o:p></o:p>
leonie6214

Hello,
Is the following article what you are looking for?
http://msdn.microsoft.com/en-us/library/ms345578.aspx
If not, could you explain a little bit more what you want to accomplish?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to add a loader to an image gallery loading content using only actionscript

hi i am loading all thumbs and images in a container on a single frame using action script..but the size of the swf becomes 1.2 mb so i want to add a loader to it...the loader i am trying to add counts the frames but my file has just one frame so the loader doesnot show up..
here is the script of my gallery..and the timeline has just one frame...
import mx.transitions.Tween;
import mx.transitions.easing.*;
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 18;
var scrolling:Boolean = true;
for (i=1; i<=imagesNumber; i++) {
container.attachMovie("thumb"+i,"thumb"+i+"_mc",i);
myThumb_mc = container["thumb"+i+"_mc"];
if (i==1)
myThumb_mc._x = (0.0)*myThumb_mc._width;
else
myThumb_mc._x = ((1.2*i)-1.2)*myThumb_mc._width;
myThumb_mc._y = (Stage.height-myThumb_mc._height)/2;
myThumb_mc._alpha = 100;
myThumb_mc.largerImage = i;
myThumb_mc.onRollOver = function() {
this._alpha = 60;
myThumb_mc.onRollOut = function() {
this._alpha = 100;
myThumb_mc.onRelease = function() {
this._alpha=100;
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = false;
scrolling = false;
_root.attachMovie("image"+this.largerImage,"large_mc",2);
large_mc._x = (Stage.width-large_mc._width)/2;
large_mc._y = (Stage.height-large_mc._height)/2;
new Tween(large_mc, "_alpha", Strong.easeOut, 0, 100, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,100,50,0.5,true);
large_mc.onRelease = function() {
scrolling = true;
var myFadeOut = new Tween(large_mc, "_alpha", Strong.easeOut, 100, 0, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,50,100,0.5,true);
myFadeOut.onMotionFinished = function() {
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = true;
large_mc.removeMovieClip();
container.onEnterFrame = function() {
if (scrolling){
this._x += Math.cos((-_root._xmouse/Stage.width)*Math.PI)*20;
if (this._x>0) {
this._x = 0;
if (-this._x>(this._width-Stage.width)) {
this._x = -(this._width-Stage.width);
anyone knows how to add a loadre to this...?
thanks..

Check these links for tutorials on loading images
http://www.kirupa.com/developer/flashcs3/loading_image_as3_pg1.htm
http://tutorials.flashmymind.com/2009/02/loading-multiple-images/

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add a computer to Mac Mini server network?

Hello,
Can anyone tell me how to add a Mac Air to the computers my Mac Mini server recognizes? Currently, I cannot share files between computers.
Thanks for any help!

Hmmm, not sure which end the problem is on, if you don't get an answer here you might post over here...
https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_lio n_server

How to add licensed ports to essbase olap server for as400

Does anybody know how to add aditional licensed port to essbase olap server for as400 without having to reinstall the product, or reinstall the fixpack? thanks in advanced!

On Unix / Linux you should be able to leverage the response from Raphael and change:
Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
For more information verify the below link
[How do you update the SAP Integration Kit license?;
Regrads
Pardhu

How to add Check box to a static Drop down list (bases on a selection list) and allow mulity select in it?

Dear All,
I created a text field in my project (Light switch 201, C#), this text field has a static list which I filled manually. when I click in this text box I get a dropp down list which allow me to chose only one value from it.
Now what I want to do is to add a check box in this drop down list and allow mulity selection from this list. My list looks as follow:
Can anyone help me :) ?
Thanks all,
Zayed

Something like this:
http://www.codeproject.com/Tips/452756/Add-checkbox-inside-combobox-in-Silverlight

How can I find what scom group a specific server belongs to using powershell?

Environment: SCOM 2007 r2
Server in question: Running Windows 2003 Std. (yes I know this sounds crazy)
Why do I need this: I noticed at the console level we have had server unexpected shutdown events which are not generating email notifications.
Source shows: Windows 2003 Server Standard Edition
Alert Rule: Windows Shutdown Unexpectedly
From what I see these are all windows 2003 server Std edition systems. I did a track and trace using our exchange tracking system which confirmed the alerts were not being emailed. Not sure if there is a better approach for this, but not being a sql
expert (however I do have someone I can leverage) I am trying to see if I can somehow extract this information using powershell.
Secondary general question: How can I find out the current size of our scom 2007 database and the number of objkects\servers being monitored? This is prep work for a migration over to 2012.
Thanks in advance for the help!

1. what scom group a specific server belongs to
function Get-GroupNames {
[cmdletbinding()]
param($computerFQDN)
$containmentRel = Get-RelationshipClass -name:’Microsoft.SystemCenter.InstanceGroupContainsEntities’
$computerClass = Get-MonitoringClass -name:”Microsoft.Windows.Computer”
$criteria = [string]::Format(“PrincipalName = ‘{0}’”,$computerFQDN)
try {
$computer = Get-MonitoringObject -monitoringClass:$computerClass -criteria:$criteria
$relatedObjects = $computer.GetMonitoringRelationshipObjectsWhereTarget($containmentRel,[Microsoft.EnterpriseManagement.Configuration.DerivedClassTraversalDepth]::Recursive,[Microsoft.EnterpriseManagement.Common.TraversalDepth]::Recursive)
catch {
$_
write-host “An error occurred while querying groups of $computerFQDN”
foreach($group in $relatedObjects)
[array]$Groups = $groups + $group.SourceMonitoringObject.DisplayName
if($groups) {
return $groups
} else {
write-host “No groups available for $computerFQDN”
Usage:
Get-GroupName -ComputerFQDN myserver1
for detail, pls. refer to
http://techibee.com/powershell/powershell-get-scom-groups-of-a-computer-account/1129
Roger

Unable to install SSL Certificate - ADMIN4118: Only one server certificate can be installed at a time

Hi,
We are trying to install SSL certificate (Verisign Class 3) on iPlanet Web Server (version 7). However, at the final step we are getting the error "ADMIN4118: Only one server certificate can be installed at a time"
We are following the below steps,
Under "Server Certificates" tab,
     -> Click on "Install" button.
     -> On "Select Configuration" click on "Next" button.
     -> On "Select Tokens and Passwords", select default token as "internal" and click on "Next" button.
     -> On "Enter Certificate Data", select option as "Certficate File" and give path to the certificate file which is having .p7b extension
     -> On "Certificate Details" we are getting warning as "Duplicate Server Details Found" and it's by default using the existing certificate's nickname.
     -> On "Review" page after clicking "Finish" button, an error is displayed saying "ADMIN4118: Only one certificate server can be installed at a time"
There are multiple sub-domains availble and the new certificate we want to install contains one more sub-domain.
So, say currently the subdomains present are,
1.abc.com
2.abc.com
so on...
and now we are trying to install a SSL certificate having one more subdomain say 10.abc.com.
Please let us know if you have solution to this problem.
Thanks,
Rajesh

Hi Rajesh,
That error is most commonly seen when you are trying to install a certificate chain into the Web Server.
The chain should be installed using the "Certificate Authorities" tab per the following steps:
1) Login to the Admin Console.
2) Click Edit Configuration from Common Tasks > Configuration Tasks.
3) Click the Certificates > Certificate Authorities tab from the Configurations page.
4) Click the Install... tab from the Certificate Authorities (CAs) page.
An Install CA Certificate Wizard opens. The wizard guides you through the settings available for installing a Certificate Chain. Select Certificate Chain when prompted for Certificate Type.
You should then see the CA and intermediate certificate(s) listed in the security database.
If you have access to MOS, more details can be found in the MOS KM Note:
   Oracle iPlanet Web Server - 'ADMIN4118: Only one server certificate can be installed at a time' When Installing Certificate Chain (Doc ID 1925025.1)
regards
Tracey

How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

I need to add text vertically in a word document outside the margins. How can I do this with Microsoft.Office.Interop.Word and C#?
Leonard Swarczinski Software Developer Postal Center International

Hi Leonard,
According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample for you.
using Microsoft.Office.Core;
using Microsoft.Office.Interop.Word;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace AddTextToWord
class Program
static void Main(string[] args)
CreateNewDocument();
Console.ReadLine();
private static void CreateNewDocument()
Object oMissing = System.Reflection.Missing.Value;
Microsoft.Office.Interop.Word.Application oWord;
Microsoft.Office.Interop.Word.Document oDoc;
oWord = new Microsoft.Office.Interop.Word.Application();
oWord.Visible = true;
oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
String HeaderText = "Hello everyone!";
WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
AddHeader1(oWord, HeaderText, wdAlign);
private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
Object oMissing = System.Reflection.Missing.Value;
WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
textBox.TextFrame.TextRange.Text = HeaderText;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
Office development in Visual Studio
http://msdn.microsoft.com/en-us/office/hh133430.aspx
Abhout: AddTextbox Method
http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
How to: Programmatically Insert Text into Word Documents
http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

How to Add Industry Code in web Ui search result List

Hello Friends,
I need some help from you...
We have a Requirement like In Business Partner (BP) we have Identification tab in that we have again Industries. My client requirement is they need Industry codes In WEB UI Search Result list. Could you please tell me how can i add this in Search result list.
Please find the below Mentioned Screen shorts.
Regards
Mohammad

Hello Mohammed,
That is totally easy. You just have to add a new attribute in the BOL-object for the result list.
- Either a value attribute
- Or better a model attribute of the BOL-object where industry code is in
You also need to think about what to show if a business partner has several industry codes like in your case. I normally only show 1:1-attributes in the result-list.
Best regards,
Thomas Wagner

How to add properties to Channels in Portal Server 7

hi,
When in the Portal Server Console in the Manage Containers and Channels section I can easily edit the properties for the configured items. Now I want to add a property to, let's say, the SearchProvider or the preconfigured Search of the DeveloperSample portal. How would I go about that? PS6 had a nice big "New" button on the property pages to add properties, how can I do the same with PS7?
What I want to do is add a property to the Search that I can then access from within the jsp files, but that can easily be set and changed from the server console.
any hints are appreciated ;)
thanks!

The "New" button was removed from the UI for the console in PS 7 to avoid confusion caused by adding properties to channels that are then not referenced by the code for the channel. The only way that a named property can be used is if the property is referenced by the code for the Provider, e.g., in the Java code or in the JSP. When the code is modified to start referencing a new property, the intent is that the developer also modify the <Provider> definition in the display profile to also list a default value for that property. Then the property will show up in the property edit page for channels created from that Provider.
Editing of the Provider definition requires actually editing the display profile XML.
HTH.
Tom

How to add agent software in the agent software update list from OEM12C?

The OMS version is 12C. In the OEM web page, the agent software should have a list for all platform in the agent software update list, where you can go from setup => extensibility => self update => agent software. But we only have agent for linux. The rest of them were removed earlier. We need to add back the agent software for Sun SPARC and Sun x86 (intel). Can somebody tell how to do it?
Thanks!

If you have deleted the agent software in self update then its very simple to get them back.
a) From the Self Update page, select the Agent Software entity, then click Check Updates to get the latest agent binaries
b) A job is triggered and once it is done, you will see that the Available Updates column has been updated. A confirmation message is also displayed.

How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Similar Messages

Maybe you are looking for