How to add a custom page in WF process?

Hi,
I have to add a custom page in a workflow process. The process is a copy of a seeded WF process.
There are 3-4 seeded pages in the process. Now I want to insert my page in between them.
Like you ppl know, this is how the seeded process works:
A function node is present and we can see "HR Activity Type" value in Node Attributes tab. This value will be present in regionMap.xml in PER_TOP/mds. This is how the page's path and node is mapped.
Similarly if I create a new node, how can I map my custom page. It wont be present in regionMap.xml
Regards,
Pradeep .

Hi Pradeep,
I know its been a while since you had posted this, but I have a few questions. I am working on something very similar. I have created a custom OAF page that I would like to launch from HR Line Manager Self Service. When I followed your suggestion of "HR Activity Type" = Page, and "HR Activity Type value" = name the AOL registered function, it brings up a blank page for me. Any idea why that might be?
When the manager clicks the "Action" icon next to the selected employee, it starts the WF and my node is the first one in the WF process. But instead of showing my custom OAF page, it shows a blank page that reads "Create Process". Does it make any difference whether the node is inserted between existing nodes or if its the first one? Did you have to write anything in the processRequest of your CO ? I have not yet added the suggested wfaactivity call in my PFR, but since my page is not displaying in the first page, I figure the PFR logic doesn't matter at this point.
Can you share the exact values for your node attributes if you don't mind, and if there's anything specific to WF you had added in your PR of the CO?
Thanks in advance.
Sameer

Similar Messages

OIM 10G how to add a custom page to menu

Hi. I need to add a custom request page to the OIM Menu and have 2 options:
1- Does somebody has a good howto to achieve this?
2- does somebody has the knowledge to do this for a reasonable price?
Thank You.

Problem when trying to add a link to the left menu item!!!!

How to add a custom multimedia playback control to add a time line of what is being played?

How to add a custom skin in multimedia playback control to add a time line of what is being played? As it is being played...
I need a time line so any part of the what is being played can be found by time, ie at 1 minute and 30 seconds in and continues for 45 seconds out of a 50 minute audo.

If you're talking about a playback controller within the rich media annotation (RMA) then you need to write your own widget in Flash or Flex, and then place the video and widget files using the multimedia "Add Flash" tool in Acrobat instead of the "Add Video" tool. Aside from a bunch of proprietary code to handle events, commenting and the API (which you can live without for basic play-pause-scrub applications), video RMAs are just an embedded SWF file containing an FLVPlayback component. The skin and the video file itself are added to the RMA as resource entries. You can build your own version and have it display whatever controls you want, provided you know how to write ActionScript!
If you're talking about a controller that's external to the RMA (e.g. a series of links or buttons elsewhere on the page) then in the past you would use FLV video files and the 'cue points' feature that's built into Acrobat - however Adobe removed the ability to create FLV files in the latest version of CC, so unless you have CS6 or earlier it's a non-starter. Instead you can manually set playback start points using the special "multimedia operations" link action in your PDF - though stopping playback at a defined point is very difficult without FLV cues. For that you're back to writing your own widget.

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
 <head>
 <script language="JavaScript">
 setTimeout(closeMe, 3000);
 function closeMe() {
 alert("This window will close");
 top.close();
 </script>
 </head>
 <body>This window will close in three seconds</body>
</html>
{code}

Designer 2010 - how to add a custom or calculated field ?

Hello
I have a list like this:
[name][course][date][result]
John Smith, Windows beginners, 01-01-2014, 10
John Smith, Windows advanced, 02-01-2014, 7
Jane Doe, Windows beginners, 01-01-2014, 5
Wanted:
A list that shows all the people that attended 2 courses and a sum of their results.
Following the example above:
John Smith, 17, (2 courses)
How can you add a custom field in designer? I have been tinkering but can't find it. If I place the cursor in a bottom row of the list, and in the ribbon I choose Options/Formula, I can enter an Xpath expression. But after clicking OK, nothing happens, nothing
appears.
Is there a tutorial (for beginners) somewhere on how to add a custom field to a page?
Thank you!
D

I think the easiest way to accomplish this is through using the jQuery SPServices library to call the list items into an array and group by name. Then you can count the number they have done and then also do your calculations.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How to add another Chapter Page for more then 6 chapters & add right arrow?

Hello,
I created a project via the Magic iDVD option and it worked great and added multiple chapter pages for more then 6 chapters. Now, I manually added a submeno off of main and added 6 chapters but I need multiple pages since I have 40 chapters... I can't figure out how to add another chapter page and create a RIGHT ARROW navigation button for the next pages...
I also looked at the map view and see that on the working pages there is page connected to page... I also cannot find a way to add a page connected vi map view...
I have searched the forum but none of the answers were clear on how to do this... any help would be appreciated...
Thanks! T.

Adding the submenu is easy...making the button for it a "right arrow" is not.
You can keep adding submenus to other submemus by navigating to the appropriate menu and then choose the "add submenu" command from the iDVD project menu. This can be done in either normal or map view.
However, this creates a "folder" button, (or other things in some themes) not a right arrow. I agree it should be a choice! My 2nd best solution is to chage the folder button to a "text only button" and label it "More Chapters > >"
Another solution (3rd best??) is to use command-shift-4 when you are one one of your other menus that DOES have a right arrow, and take a mini picture of the arrow. Then choose one of the oval menu buttons on the button pane, and drag this tiny picture onto the button. Re-size it to make it close to the same size as your other buttons. It will have a funny edge on it from the button style, but it will look like a right arrow.
John B

How-to add a custom Web Dynpro iView to the MSS Employee Profile

Hello everybody,
i have created a small How-to guide of how to add a custom iView/Web Dynpro application to the standard MSS Employee Profile for ECC 6.0.
The How-to guide can be found <a href="https://wiki.sdn.sap.com/wiki/display/profile/2007/04/15/How-toaddacustomWebDynproiViewtotheMSSEmployee+Profile">here</a>
I hope its of any value.
cheers,
Markus

Hello Luca,
unfortunatelly it wont work. A WDA Application does not have access to the Floorplan Manager for XSS Applications. So until SAP develop an interface, you have to stick for such a task to WDJ.
regards,
Markus

How to add a custom code to standard sap menu

Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juan

Hello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes

How to add new tab page to equiment ?

Dear Guru's
i created the new equipement category K by coping the standard S.when i am creating the equipment while using equipment category S i am getting tab pages General,Location,organization,structure,Sales and Distribution.
But while using the equipment category K for creating the new equipment i am getting the tab pages General,Location,organization,structure 4 only.
why the 5 one Sales and Distribution is not coming ?
how to add new tab page like Partners ?In that fields like sold to party,ship to party ?
Could anybody help me in this regards
Thank you
suribabu

In Equipment category creation config in IMG, check for the View Profile for both the equipment category S & K.
For adding new tab, follow the IMG path.
PM & CS => Master data => Technical Objects => General Data => Set view profiles for Technical objects
Select the View profile which has been assigned to your equipment category & click Activity & layouts of views. In that screen, under seq.no, select the Partners.
Do the same for other requried tabs based on your requirement.
If there are same profile assigned to both equipment category, go to equipment creation creation => Edit => view selection. There you will find the required tabs.

How to add a custom page in WF process?

Similar Messages

Maybe you are looking for