How to add a download link in a report directed by a navigation link?

I have searched the net but could not find the solution.
I added a link in a dashboard page. The link is connected to a request. When the link is clicked, the page goes to a report, which is not placed in a section region.
Now, how to configure the report so that a download link is displayed right under the navigated report?
I know that if a report is placed under a section in a dashboard design page, use the "Request Link..." to add the download link. But such a "Request Link..." feature is not available for a navigate-link directed report.
Many thanks in advance.
Quin

I haven't seen this done, but it may be possible. As a workaround why not create a new hidden dashboard page and put your request on that page with the appropriate 'Download' report link?

Similar Messages

  • How to add/create additional page in Crystal Report Layout SAP B1

    Hi,
    I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
    I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
    Pls help me to find the solution.
    Br,
    Thomas Marsetyo

    Hi,
    In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
    If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
         Check this Link
    http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
    http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
    Regards,
    Manish

  • How to add a formula column in a report

    Hi
    I have made a report based on a query.
    There are 3 columns in the query and all the 3 are displayed.
    Now I want to add a new column (fomula column) to the report.
    I want to write a query inside the formula column. To execute the query col1, col2 and col3 values are required in the formula column.
    Could you please tell me how to add a formula column in the report and how to pass database column value to inside the formula column
    regards

    Here is how you would create a formula column:
    Open data model of the report.
    Formula column button is on the left side of the tool palette.
    Click on that button.
    Now click in the query group where you want to place the formula column.
    You would see a new field something like CF_1. That is the formula column.
    Double click on the field CF_1. It will open property inspector.
    You would see, Datatype of the formula column is Number. Change this as per your requirement.
    Double click on PL/SQL Formula property. It would open up a editor. Here you can write the code.
    And now to access the data model column here, you can use : and column name. i.e. :col1 or :col2, etc
    And remember you have to return the value back to the formula column. Like this: RETURN(some value).
    You can also take a help from here:
    http://download.oracle.com/docs/html/B13895_01/orbr_howto.htm#sthref1309
    Hope this helps.

  • How to add the double headings in Alv Report.

    Hi All,
    Plz suggest me how to add the double headings in ALv Report.
    Ram

    Hi,
    Try out this program....
    REPORT  ypm_historycard_rep.
    TYPE-POOLS : slis.
    DATA : it_cbm TYPE STANDARD TABLE OF mara.
    DATA : it_layout TYPE STANDARD TABLE OF slis_layout_alv WITH HEADER LINE,
           wa_fcat TYPE slis_fieldcat_alv,
           it_fcat TYPE slis_t_fieldcat_alv.
    START-OF-SELECTION.
      SELECT  *
      FROM  mara
      INTO CORRESPONDING FIELDS OF TABLE  it_cbm
      where matnr = 'D80K7'.
    END-OF-SELECTION.
      it_layout-zebra = 'X'.
      it_layout-colwidth_optimize = 'X'.
      it_layout-f2code = '&ETA'.
      APPEND it_layout.
      DEFINE macro4fcat.
        wa_fcat-col_pos = &1.
        wa_fcat-fieldname = &2.
        wa_fcat-tabname = &3.
        wa_fcat-seltext_l = &4.
        append wa_fcat to it_fcat.
        clear wa_fcat.
      END-OF-DEFINITION.
      macro4fcat    '1'  'MATNR'         'IT_CBM'   'MATERIAL NO'    .
      DESCRIBE TABLE it_cbm.
      IF sy-ucomm = '&F03'.
        MESSAGE 'hi hello good morning "press enter button" this is quiz' TYPE 'S'.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
      i_callback_program                = sy-repid
    i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'
      is_layout                         = it_layout
      it_fieldcat                       = it_fcat
       i_save                            = 'A'
      TABLES
      t_outtab                          = it_cbm
      EXCEPTIONS
      program_error                     = 1
      OTHERS                            = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *&      Form  html_top_of_page
    *       text
    *      -->TOP        text
    FORM html_top_of_page USING top TYPE REF TO cl_dd_document.
      DATA: l_text(255) TYPE c.
      DATA: text1(255)  TYPE c.
      DATA: t_header TYPE REF TO cl_dd_table_element ,
            wa_header TYPE REF TO cl_dd_table_area.
      CALL METHOD top->add_gap
        EXPORTING
          width = 10.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'hello'
        sap_style     = 'HEADING'
    CALL METHOD top->add_gap
        EXPORTING
          width = 20.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'HOW ARE YOU'
        sap_style     = 'HEADING'.
        CALL METHOD TOP->new_line
    *      EXPORTING
    *        repeat =
        CALL METHOD top->add_gap
        EXPORTING
          width = 50.
      CALL METHOD top->add_text
      EXPORTING
        text          = '____________________________________________________________'
        sap_style     = 'HEADING'.
        CALL METHOD TOP->new_line
    *      EXPORTING
    *        repeat =
        CALL METHOD top->add_gap
        EXPORTING
          width = 90.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'YOU CAN TRY LIKE THIS'
        sap_style     = 'HEADING'.
    ENDFORM.                    "html_top_of_page
    Regards
    Debarshi

  • How to add new text field in standard report

    how to add new text field in standard report?

    Hi,
    I presume you are talking about a report display in ALV and u wish to add a column to it .
    If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
    Otherwise , you can make a Z program . Modify the catalog being used in ALV.
    Regards,
    Shweta

  • How to publish my ebook into the ibook store directly is there a link?

    How to publish my ebook into the ibook store directly, is there a link?

    https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/apply

  • How to add a 'Download' feature in image and video gallery?

    Hello,
    I have created an image gallery on one screen and placed few videos on another screen.
    Now, I want to add a download feature in photos & footages both.
    Does anyone know how so I do that?
    Prompt response will be highly appreciated.
    Thanks in advance.
    Jay

    Hi,
    Could you please provide additional information on what you mean by Download feature ? Where do you want to download these images and video from ?
    Olivier

  • How to add a computed field to a reports

    I have a report where I would like to add a column that is the sequence of the row. It is not the rownum in the db, but I want it to be a row number for what is returned.
    So, if I return 10 records, I would like a column to contain 1 through 10 to depict the row number.
    I do not want to have this number in the table or view.
    Is it possible to add a computed field to a report like this?
    If so, how?
    Thanks - Jim

    The SQL function rownum should suffice if the report is not too complicated, as this returns the number of the row rather than the database row ie.
    select empno,ename,rownum
    from emp
    add some clauses each time and you should see that each row is always numbered 1 to n.
    However, if you introduce the HTMLDB column sort functionality into the report then it would appear that it is the result set that is sorted rather than a new query being issued.
    Hope this is of help.

  • How to Add new column in cross tab reports

    I am using crystal reports 10
    I created cross tab report for monthly sales. I need to add one more column in that report
    ex:
    Month   Customer    Part1  Part2    Part3      
    Jan         A               10       12         15        
    Jan         B                20      0           10        
    Jan         C               0         3           5          
    Feb        A               5         10          8          
    Feb        D               55        23        33        
    In above data Parts are no limit, thatswhy i am taking cross tab report.
    I am taking Month and Customer name as Rows,
    Part Codes as Colums,
    Quantiry as Total fields in cross tab Report.
    Here month field is storing as Transaction date in database, I am calculating by month
    I am getting upto this.
    User needs add one more field is Invoice no
    Month   Customer    Part1  Part2    Part3        Invoice no
    Jan         A               10       12         15          B1,B2,B3,B4
    Jan         B                20      0           10         B12,B30
    Jan         C               0         3           5           B6
    Feb        A               5         10          8           B35,B40
    Feb        D               55        23        33          B25,B56
    How to add invoice nos by group wise(By customer and  By month)
    Thank you.
    Raja shekar Reddy K.
    Edited by: Raja shekhar Reddy on Apr 16, 2009 5:10 PM

    Dear Amogh,
    Thanks for u'r  Replay.
    If i use new crosstab for Invoice no each invoice number can display like seperate columns.
    But I need Invoice  no in single column with seperate with "," or "/".
    Thanks & regards,
    Raja Shekar Reddy K.

  • How to add new persons in Automatic Broadcasting report

    Hi Expertts,
    How to add perrsons name (newly) in Automatic Broad casting report which is already running.
    Thanks in Advance,
    Thanks,
    Kumar.

    hi,
    first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
    FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
    Pls Suggest

  • How to add a new column to a report

    I want to add a new column to my existing report. I modified the using report wizard and added the new column. When I pressed 'Finish' I lost all my previous settings. Without changing the existing stuff, how can add a column to a table.
    Any help is appreciated.
    Regards
    Leena
    null

    go to the data model editor
    click on query .
    add new columns in select statement.
    add the corresponding fields in layout model
    compile it
    run it
    srini

  • How to enable excel downloading in ALV grid report.

    Hi all,
    How to enable excal downing in ALV grid report?
    Thanks in Advance.
    Siva Sankar.

    hi
    check the following code
    Example of a Simple ALV Grid Report
    REPORT  ZTUFI091                                .
    *& Report  ZDEMO_ALVGRID                                               *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic requirement for this demo is to display a number of       *
    *& fields from the EKKO table.                                         *
    *REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid,
          gt_events     type slis_t_event,
          gd_prntparams type slis_print_alv.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform build_events.
    perform build_print_params.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you  more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
                it_events               = gt_events
                is_print                = gd_prntparams
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    endform.                    " DATA_RETRIEVAL
    Form  TOP-OF-PAGE                                                 *
    ALV Report Header                                                 *
    Form top-of-page.
    *ALV Header declarations
    data: t_header type slis_t_listheader,
          wa_header type slis_listheader,
          t_line like wa_header-info,
          ld_lines type i,
          ld_linesc(10) type c.
    Title
      wa_header-typ  = 'H'.
      wa_header-info = 'EKKO Table Report'.
      append wa_header to t_header.
      clear wa_header.
    Date
      wa_header-typ  = 'S'.
      wa_header-key = 'Date: '.
      CONCATENATE  sy-datum+6(2) '.'
                   sy-datum+4(2) '.'
                   sy-datum(4) INTO wa_header-info.   "todays date
      append wa_header to t_header.
      clear: wa_header.
    Total No. of Records Selected
      describe table it_ekko lines ld_lines.
      ld_linesc = ld_lines.
      concatenate 'Total No. of Records Selected: ' ld_linesc
                        into t_line separated by space.
      wa_header-typ  = 'A'.
      wa_header-info = t_line.
      append wa_header to t_header.
      clear: wa_header, t_line.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
               i_logo             = 'Z_LOGO'.
    endform.
          FORM USER_COMMAND                                          *
          --> R_UCOMM                                                *
          --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
      Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
        Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDCASE.
    ENDFORM.
    *&      Form  BUILD_EVENTS
          Build events table
    form build_events.
      data: ls_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
           exporting
                i_list_type = 0
           importing
                et_events   = gt_events[].
      read table gt_events with key name =  slis_ev_end_of_page
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_PAGE' to ls_event-form.
        append ls_event to gt_events.
      endif.
        read table gt_events with key name =  slis_ev_end_of_list
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_LIST' to ls_event-form.
        append ls_event to gt_events.
      endif.
    endform.                    " BUILD_EVENTS
    *&      Form  BUILD_PRINT_PARAMS
          Setup print parameters
    form build_print_params.
      gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
      gd_prntparams-no_coverpage = 'X'.
    endform.                    " BUILD_PRINT_PARAMS
    *&      Form  END_OF_PAGE
    form END_OF_PAGE.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      write: sy-uline(50).
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    *&      Form  END_OF_LIST
    form END_OF_LIST.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    hope it will help you
    regards
    sreelatha gullapalli

  • How to add more fields to Customer sales report

    I want to add some fields to customer sales report generating through S_ALR_87012186 like,Invoice number,Invoice date,Tax registration number,tax amount,before tax amount..etc.
    Please let us know the best possible method to add these details.

    It is not suggested to alter a standard SAP report. Still if the requirement persists, then copy the standard program into a zprogram and add required fields.

  • How to add water mark in already build report

    hi experts............
    im fresher , i need to add water mark in already build report..please help me to do this.......
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on May 20, 2011 9:25 AM

    I'm not sure the is a solution in your version. Duncan Mills blogged about a solution here https://blogs.oracle.com/groundside/entry/placeholder_watermarks_with_adf_11 but it's for a later version.
    However it might help you getting started.
    Timo

  • Unable to pass the values from one report to another using navigation links

    Hi All,
    I am facing a strange issue where I have to pass a column value from one report to other.
    I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
    Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
    Can anyone advice where I was going wrong
    Thank you,
    AO

    Hi,
    The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
    mark if helpful/correct.........
    thanks,
    prasanna

Maybe you are looking for