How to add a field in standard tcode pa30 with info type 21.

Hi Experts
I need to add a field Child Allowance Entitlement in PA30 transaction where infotype is 21, this field is available in table P0021 but which is not active in standard transaction.
I just check in SPRO Settings - > Personnel Management - > Personnel Administration -> Customizing user Interface -> Change screen modificaion -> in that i gave the module pool number as mp002100 and screen number as 2000. the field is not shown there. but in alternative screen 2005 that field is available how can i display that field in the standard transaction pa30 with infotype 21.
Can anyone please suggest me to display the field in the standard transaction.
Regards,
Vijayan.R

Hi Vijayan,
to modify the infotype screen for your purposes, you have to maintain feature P0021 as mentioned above, in order to obtain your screen modifier.
Usually this modifier is equal to your corresponding MOLGA.
This modifier is then used in V_T588M, when you can assign alternate screen modification to your modifier.
Let`s say :
Modifier 06 - France -    Screen 2000
Modifier 01 - Germany - Screen 2000 with some hidden fields.
I hope it helps
Best regards
Ondrej
Edited by: Ondrej Smutny on Aug 15, 2011 10:38 PM

Similar Messages

  • How to add new field at standard report,?

    Hi expert,
    How do i find an easy way to add new field using this tcode  s_alr_87012332 ?

    Hi,
    In order to add a custom fields , please chech the enhancement MM06E005.
    Here, you can get includes in which you can place ur field.
    Hope this helps.

  • How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

    i am facing problem in Report RMclobjvn , TCODE is CL6BN
    i have to add some additional fields on the result screen.
    but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
    <b>Exit name
    CLCLRS01  Additional Fields on the Result Screen
    CLCLRS02  Fill the Additional Fields on the Result Screen</b>
    i activated the these exits and have tried putting in break point in side the include.
    But the problem is this that
    [<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
    does anyone has any solution for adding the additional fields.

    Hai Manish
    Check the following Links
    You can do it in two ways using append structure or include structure of that standard table.
    once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
    check this SAP help..
    for append structure
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
    for include structure.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
    Regards
    Sreeni

  • How to add new fields to standard reports

    hi friends,
                 im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
    for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
    append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
    ?when we check the standard rewport codes...there are lot of include statements perform statements etc  ...how to find out the final structure or internal table which has the output values..???

    hi
    it would be better if u giv full name of the report
    if ur displaying the data in alv then search for the
    word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
    then check the data that is comming into
    try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
    if ur displaying the data using write statement
    then create a zprogram and add a write statement
    fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
    shiva

  • How to add new fields to standard alv report

    Hi,
    Tcode(VL10G) .ie.out put list will not showing one new field.I want to add one more field to output list. append the field(VIKP-SDABW) In the SHP_VL10_ITEM structure .And write the logic in the exit LV50R_VIEWG05----
    >USEREXIT_PREPARE_LAYOUT_FILL.Please expain what is the process?
    Why i have write the code?what logic i will write?
    Thanks & Regards,
    sairam

    FORM ZI004_FIELDCAT_MOULD .
        wa_fieldcat-fieldname = 'ZMLDCDID' .      "Mould Code ID
        wa_fieldcat-tabname   = 'IT_MLDETAILS' .
        wa_fieldcat-outputlen = 40 .
        wa_fieldcat-seltext_l = text-010 .
        APPEND wa_fieldcat TO it_fieldcat.
        CLEAR wa_fieldcat.
        wa_fieldcat-fieldname = 'ZMLDID' .        "Mould ID
        wa_fieldcat-tabname   = 'IT_MLDETAILS' .
        wa_fieldcat-outputlen = 20 .
        wa_fieldcat-seltext_l = text-011 .
        APPEND wa_fieldcat TO it_fieldcat.
        CLEAR wa_fieldcat.
        wa_fieldcat-fieldname = 'ZMLDCODE' .      "Mould Code
        wa_fieldcat-tabname   = 'IT_MLDETAILS' .
        wa_fieldcat-outputlen = 40 .
        wa_fieldcat-seltext_l = text-012 .
        APPEND wa_fieldcat TO it_fieldcat.
        CLEAR wa_fieldcat.
    endform.

  • How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

    Hi Experts,
    How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
    I have no idea how to start with, please give some advice.
    Thanks!
    Ice

    Dear Ice,
    Use Append structure, see given link:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    Regards,
    Abbas.

  • How to add additional fields to zreport which contains standard report code

    Hi Experts,
    In order to add additional fields to standard report i copied the code into zreport but i am unable to  add additonal field into report because the code is looking so complex.
    standard report:AQZZ/SAPQUERY/FKF1============
         or
    sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
    Additional feilds to add is :Region,company code,country
    Please let me know how toidentify ALV and guide me how to solve this.
    Regards,
    naresh.

    Hello Naresh,
    First check whether these three fields are available in the text elements area.
    Please write your code in the subroutine %comp_ldesc.
    Repeat the code for your three new fields
    perform ldesc(rsaqexce) using 'G00010000X010       00  A1'
        %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
      read table %textpool_langu into %textpool_langu_line
                                 with key ID = 'I' key = 'A01'.
      if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
      else. %txt1 = %txt_unknown.
      endif.
    So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
    I think this is enoogh.
    Please update if you got the solution, which will be informative for others.
    regards,
    Antony Thomas
    Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

  • How we can add custom field in standard report 2kee.

    Hi,
    How we can add custom field in standard report 2kee.
    I need one extra field to add in 2kee report for the same is there any customization req.
    Regards
    Ravi

    Ravi,
    Which extra field do you want to add or see?  Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
    There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
    Nonetheless, if the field you want to add does not already exist, then yes you can do customization.  Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
    Have your abaper add the said field in the program or why not just create a query to pull the report?
    Elias
    Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

  • How to add search help for standard field LIKP-TRAID

    Hi friends,
    How to add search help for standard field LIKP-TRAID ,
    refer screen
    Program Name       SAPMV50A  
    Screen Number      2108      
    TrnsIDCode ( LIKP-TRAID ) ..
    I need to add a search help, so that i can retrieve data from Ztable.
    Thanks.
    Abhi

    Hi Abhi,
    Try using any one option:
    Create a Search Help in SE11.
    Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
    OR
    Create a Zdata element in SE11.
    In Data Element, under Further Characteristics tab, enter Name  Parameters of Search Help.
    Assign this data element to that field in ur Ztable.
    OR
    Create a Zdomain and maintain a Value Table or Fixed Values for it.
    Assign this domain to that field in ur Ztable.

  • How to freeze fields on standard Tcodes.

    Dear SAP Guru
    Can any one plz let me know how to freeze the fields on standars T-codes, as i want our end users to use only particular fields on standard tcodes in SAP
    Thanks in Advance
    Bhushan

    [http://theguruspeaksaboutsap.blogspot.com/2007/12/creation-of-variant-for-making.html]
    use transaction SHD0 as in the above link

  • Add Custom Fields in MB1B Tcode

    I want to Add Custom fields in MB1B Header Data. I not able to find way how to do that. So can you please let me know how to add custom fields in MB1B.
    Thanks & Regards
    Nikunj Shah

    Hi Parikshit,
    There is no badi or user exit available to add a custom fields.If that fields are standard one then it can be controlled against the movement type.Go to T code: OMCJ .Select the movement type, and click on display. And maintian the filed settings accordingly.
    Post if need help.
    if you need validations there are some exits.
    TCode MB1B
    EXIT_SAPMM07M_001 - MBCF0002 - Customer function exit: Segment text in material doc. item
    EXIT_SAPMM07M_003 - MBCFC003 - Maintenance of batch master data for goods movements
    EXIT_SAPMM07M_004 - MBCFC004 - Maintenance of batch specifications for goods movements
    EXIT_SAPMM07M_005 - MBCF0006 - Customer function for WBS element
    EXIT_SAPMM07M_009 - MBCF0009 - Filling the storage location field
    EXIT_SAPMM07M_010 (Propose Batch / Transfer Batch) - MBCFC010 - Propose batch number on Inventory Management item screen
    Regards,
    Madhu.
    Edited by: madhurao123 on Jun 28, 2011 9:44 AM

  • How to Add parameter fields in BI publisher fields

    Hi,
    I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
    So i got the XML file from output of the report.
    Then i added the xml data in BI publisher and then i have created the .rtf for that.
    Here i need to add some fields which is not available in fields list (in BI Publisher).
    How to add that fields, or is possible to add fields manually.
    That fields are given as parameters while running the .rdf file.
    Please tell me how to solve this problem.
    Is possible to add fields manually means tell me how to do that.

    If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
    <?param@begin:P_CONC_PARAM?>
    and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

  • REG: How to add new fields to existing Infospoke

    Hi All,
    We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
    But here is the scenario....
    I need some extra fields that are available in other ODS. How to add that fields ?
    By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
    Note: already BAdi is active in the infospoke.
    Please help me in this regard

    Hi Chase,
    As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
    For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
    DATA: it_data type standard table of 'DSO Name'.
    select Key1 key2 etc...
              Field1 Field2 Field3 Field4
              from DSO
              into table it_data
              for all entries of infospoke
             where key1 = infospoke1-key1
                         key2 = infospoke2-key2.
    This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
    Regards,
    Durgesh.

  • CRM  IC Winclient - How to add new fields in the BP Search of TRX CIC0

    Hello Experts,
    I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
    Can you help me?
    Thanks in advance.
    Caíque Escaler

    Hi
    make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
    in spro in Define customer-specific search control -> mark fields with X.
    and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
    you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
    Regards
    Radek

  • How to Add IBAN Field in the Bank Details Infotype?

    Hello All,
    I need to know the procedure for How to add IBAN field in the bank details infotype?
    Could anyone help me please.
    I m new to SAP HR.
    Immediate help will be appreciated.
    Thanks.
    Regards,
    Mudassir.Imtiaz

    Hi mudassir,
    For IBAN implementation:
    1. Implement SAP Notes 925410, 1409674, 1405521
    2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
    For Turkey we've added the following entry (depends on country) :
    00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
    3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
    4. Go to table T77S0 and make value of ADMIN IBAN entry S.
    Regards,
    Dilek

Maybe you are looking for