How to add a new tables in the existing Pricing Report

Hi,
I have created Z2 list report in the pricing report (V/LD) with some tables and field names.
Now I got one requirement that i have to Add some more tables and filed names in the List Report Z2 in the pricing report.
Could anyone helpme out how can i add tables and fileds names to the existing list report in the Pricing report
Thanks for your support
Best Regards
Amjathpasha

hi, Pasha:
May i know how to solve this problem? as i also met this kind of problem.
and i tried V/lb, do not find the place to add the table.
Thanks,
Linda

Similar Messages

  • How to add a function field into the existing matrix report

    Hi,
    I have a matrix report , now i wanted to add one moe field into the matrix which is getting the value from a function , this function is a part of the ref cursor query(group) , i'm able to get the value from the function but it cannot display on the existing matrix report. i wanted to add this in the repeating frame which is printing down. how could i do this , looking for your help. thanks . bcj

    Here the scenario like,
    Data from Table_1
    NAME UNITS DAYS RATE
    AAA 10 1 1.2
    BBB 12 2 3.1
    AAA 20 2 4.1
    CCC 23 1 5.2
    Here, In the matrix report the NAME and UNITS are row fields and 'DAYS' is column field , RATE would be the cell field, and
    Data from Table_2 ,
    NAME BASIC
    AAA 2
    AAA 2
    BBB 2
    CCC 3
    In the report i have to display the 'BASIC' along with the NAME in row level ( repeating frame printing down),
    To get the multiple 'Basic' for each 'Name' using a ref cursor .
    and, using a function to do further calculation based on the basic value
    begin
    select basic into v_basic where name =:name;
    return(caluculated_value);
    end;
    and return the calculated value to the report. But at that time cannot accommodate the value in the matrix report with other groups frequency.
    looking for your valuable help. Thanks Bcj

  • How to add two new paramater to the Account Analysis report

    Hi All,
    I was working in Oracle Apps R12.1.2.
    Now i need to customize Account analysis report.
    Now i need to add two new parameter namely Party_name and party_site_name. So now instead of creating new parameter i have used the P_Custom_parameters namely 1 & 2.
    I have searched and found that they have used in this party_name concept only in this part only
    p_party_columns :=
    ',CASE
    WHEN ael.party_type_code = ''S'' THEN
    (SELECT aps.segment1
    ||''|''||aps.vendor_name
    ||''|''||hzp.jgzz_fiscal_code
    ||''|''||hzp.tax_reference
    ||''|''||hps.party_site_number
    ||''|''||hps.party_site_name
    ||''|''||NULL
    FROM ap_suppliers aps
    ,ap_supplier_sites_all apss
    ,hz_parties hzp
    ,hz_party_sites hps
    ,xla_ae_lines ael2
    WHERE aps.vendor_id = ael2.party_id
    AND hzp.party_id = aps.party_id
    AND apss.vendor_site_id(+) = ael2.party_site_id
    AND hps.party_site_id(+) = apss.party_site_id
    AND ael2.application_id = ael.application_id
    AND ael2.ae_header_id = ael.ae_header_id
    AND ael2.ae_line_num = ael.ae_line_num
              AND aps.vendor_name = :P_CUSTOM_PARAMETER_1
              AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
    WHEN ( ael.party_type_code = ''C'' AND ael.party_id is not null ) THEN
    (SELECT hca.account_number
    ||''|''||hzp.party_name
    ||''|''||hzp.jgzz_fiscal_code
    ||''|''||hzp.tax_reference
    ||''|''||hps.party_site_number
    ||''|''||hps.party_site_name
    ||''|''||hzcu.tax_reference
    FROM hz_cust_accounts hca
    ,hz_cust_acct_sites_all hcas
    ,hz_cust_site_uses_all hzcu
    ,hz_parties hzp
    ,hz_party_sites hps
    ,xla_ae_lines ael2
    WHERE hca.cust_account_id = ael2.party_id
    AND hzp.party_id = hca.party_id
    AND hzcu.site_use_id(+) = ael2.party_site_id
    AND hcas.cust_acct_site_id(+) = hzcu.cust_acct_site_id
    AND hps.party_site_id(+) = hcas.party_site_id
    AND ael2.application_id = ael.application_id
    AND ael2.ae_header_id = ael.ae_header_id
    AND ael2.ae_line_num = ael.ae_line_num
              AND hzp.party_name = :P_CUSTOM_PARAMETER_1
              AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
    ELSE
    NULL
    END ';
    But now when i ran with a specific parameter its running for all party name.
    Can any one pls guide me how to achieve this
    Thanks & Regards
    Srikkanth
    Edited by: Srikkanth.M on Oct 20, 2011 5:23 PM

    solved

  • How to add a new data element for existing table filed(Primary key field)

    Hi Experts,
    How to add a new data element for existing table field(Primary key field)
    For this filed ther is no foreign key relation ships and even check table.
    while activating table it is giving message like below.
    can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
    Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)           
    Primary key change not permitted for value table /TC/VENDOR
    Check on table  /TC/VENDOR resulted in errors              
    Thanks
    Ravi

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • Need to add 2 new columns to the existing table control of C223 transaction

    Hi ABAP Gurus,
    I have to do a screen enhancement for transaction C223.
    Below is the requirement:
    need to add 2 new columns to the existing table control of C223 transaction.
    there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
    i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
    i have created an append structure for  the 2 fields to the standard table MKAL.
    Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
    please sugest...
    Thanks & Regards

    Hi Santosh,
    Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
    IM_MKAL     Importing     Type     MKAL                                                                                Production Version
    EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
    EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
    EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
    EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
    EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
    EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
    EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
    EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
    the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change .  i dont think this can be used to add two new coloumns to C223 table control.
    I am not sure thats why seeking your help/valuable sugestion on this.
    Please provide your sugestion on this , so that i can come to conclusion on this issue.
    Thanks & Regards
    Siddhartha Mishra

  • How to add a new Element to the Context

    Hello all.
    I created in the wdInit()
    ArrayList datas = new ArrayList();
         for (int i = 0; i < 25; i++) {
              MyData data = new MyData();
              data.setMethods();
              datas.add(data);
         wdContext.nodeMyData().bind(datas);
    Now, I want by clicking on the Button "Create new Element", forward user to the other View, which elements are connected with the same model -> context, the new element should be added to context, the user should fill the form and click Save-Button.
    How can I add a new Element to the Collection I created and choose it as a current element?
    If I do: wdContext.nodeMyData().bind(new MyData()) all information will be lost. And I will have only one field.
    If I do it like this:
    IWDNodeElement dynTabElem=(IWDNodeElement)wdContext.nodeMyData().createElement();
    wdContext.nodeMyData().addElement(dynTabElem);
    I get an error: com.sap.tc.webdynpro.progmodel.context.ContextException: NodeInfo(DataComp.MyData): value node is created without a reference
    Well I can pass to my new View a Collection as a parameter and then
    Collection.add(new MyData()) and then bind it. But I find this solution not good.
    Is there any possibility to get the existing Collection from the Context without passing it to the view?
    Can I just add a new element to the existing collection?
    Thanks in advance.

    Hallo Monalisa,
    I did as you said. But I can't add something to my model class, because it is not collection.
                            MyData data = wdContext.currentBelegElement().modelObject();
                   data.add() ???? - don't work
                   wdContext.nodeMyData().invalidate();

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • Add a new table to an existing Print Layout Designer report

    Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales Order, but when I add a Database Field to the report the Sales Order tables does not appear in the list (OWOR).

    Hi
    It is possible provided there is a relationship which exists between two tables.
    You can add a Database field. Goto the Properties and selct Content Tab.
    Now in the Table dropdown, hold the Alt Key and click. This displays all the tables in B1. After selecting the Table, you can select the related Column.
    Remember there should be a relationship which exists between this column and existing columns.
    Because PLD works completely on Joins to my understanding

  • How can I write new objects to the existing file with already written objec

    Hi,
    I've got a problem in my app.
    Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
    Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
    java.io.StreamCorruptedException
    at java.io.ObjectInputStream.readObject0(Unknown Source)
    at java.io.ObjectInputStream.readObject(Unknown Source)
    Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
    If anyone of you know something about this issue, please help!
    Jai

    Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
    * Created on 2004-12-23
    package com.cpic.msgbus.monitor.util.cachequeue;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    * @author elgs This is a very high performance implemention of Cache.
    public class StackCache implements Cache
        protected long             seed    = 0;
        protected RandomAccessFile raf;
        protected int              count;
        protected String           cacheDeviceName;
        protected Adapter          adapter;
        protected long             pointer = 0;
        protected File             f;
        public StackCache(String name) throws IOException
            cacheDeviceName = name;
            f = new File(Const.cacheHome + name);
            raf = new RandomAccessFile(f, "rw");
            if (raf.length() == 0)
                raf.writeLong(0L);
         * Whne the cache file is getting large in size and may there be fragments,
         * we should do a shrink.
        public synchronized void shrink() throws IOException
            int BUF = 8192;
            long pointer = getPointer();
            long size = pointer + 4;
            File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
            FileInputStream in = new FileInputStream(f);
            FileOutputStream out = new FileOutputStream(temp);
            byte[] buf = new byte[BUF];
            long runs = size / BUF;
            int mode = (int) size % BUF;
            for (long l = 0; l < runs; ++l)
                in.read(buf);
                out.write(buf);
            in.read(buf, 0, mode);
            out.write(buf, 0, mode);
            out.flush();
            out.close();
            in.close();
            raf.close();
            f.delete();
            temp.renameTo(f);
            raf = new RandomAccessFile(f, "rw");
        private synchronized long getPointer() throws IOException
            long l = raf.getFilePointer();
            raf.seek(0);
            long pointer = raf.readLong();
            raf.seek(l);
            return pointer < 8 ? 4 : pointer;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
        public synchronized byte[] load() throws IOException
            pointer = getPointer();
            if (pointer < 8)
                return null;
            raf.seek(pointer);
            int length = raf.readInt();
            pointer = pointer - length - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            byte[] b = new byte[length];
            raf.seek(pointer + 4);
            raf.read(b);
            --count;
            return b;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
        public synchronized void save(byte[] b) throws IOException
            pointer = getPointer();
            int length = b.length;
            pointer += 4;
            raf.seek(pointer);
            raf.write(b);
            raf.writeInt(length);
            pointer = raf.getFilePointer() - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            ++count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
        public synchronized int getCachedObjectsCount()
            return count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
        public String getCacheDeviceName()
            return cacheDeviceName;
    }

  • How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

    Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
    First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
    using System;
    using System.Collections.Generic;
    using System.Configuration;
    using System.Text;
    using System.Data;
    using System.IO;
    using System.Data.SqlClient;
    using System.Windows.Forms;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    namespace DRRS_CSharp
    public partial class frmPDFTechnician : Form
    public frmPDFTechnician()
    InitializeComponent();
    private void btnExport_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(7);
    table.TotalWidth=585f;
    table.LockedWidth = true;
    PdfPTable inner = new PdfPTable(1);
    inner.WidthPercentage = 115;
    PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
    inner.AddCell(celt);
    Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
    para.Alignment = iTextSharp.text.Element.TITLE;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(95f, 95f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("ID");
    table.AddCell("First Name");
    table.AddCell("Middle Name");
    table.AddCell("Last Name");
    table.AddCell("DOB" );
    table.AddCell("Gender");
    table.AddCell("Designation");
    while (dr.Read())
    table.AddCell(dr[0].ToString());
    table.AddCell(dr[1].ToString());
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString());
    table.AddCell(dr[4].ToString());
    table.AddCell(dr[5].ToString());
    table.AddCell(dr[6].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(inner);
    doc.Add(table);
    doc.Close();
    The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
    But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
    Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
    given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
    Document doc = new Document(PageSize.A4.Rotate());
    var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(7);
    table.TotalWidth=585f;
    table.LockedWidth = true;
    Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
    para.Alignment = iTextSharp.text.Element.TITLE;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(95f, 95f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("ID");
    table.AddCell("First Name");
    table.AddCell("Middle Name");
    table.AddCell("Last Name");
    table.AddCell("DOB" );
    table.AddCell("Gender");
    table.AddCell("Designation");
    while (dr.Read())
    table.AddCell(dr[0].ToString());
    table.AddCell(dr[1].ToString());
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString());
    table.AddCell(dr[4].ToString());
    table.AddCell(dr[5].ToString());
    table.AddCell(dr[6].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    So my question is how to make my column headers in bold?
    So these are my questions.
    1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    3.how to make my column headers in bold?
    I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
    Any help or guidance in solving this problem would be greatly appreciated.
    vishal

    Hi,
    >>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    3.how to make my column headers in bold?<<
    I’m sorry for the issue that you are hitting now.
    This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
    http://sourceforge.net/projects/itextsharp/
    Thanks for your understanding.
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to add a new table or view in the view object

    hello,every one.
    I wanna add a new table or view in the view object's query statement.
    when the table or view not in the where clause,the query statement is working fine.
    If they in the where clause,I got the "java.lang.NullPointerException".
    who can help me
    thank you very much

    thank you for your reply
    I wanna extend the VO
    oracle.apps.pay.selfservice.payslip.US.server.PayPayslipGetPersonDetail
    the original sql is:
    SELECT ppf.person_id,
    FROM per_people_f ppf,
    per_assignments_f paf,
    pay_assignment_actions paa
    where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
    I wanna extend:
    SELECT ppf.person_id, pay_v.element_name,pay_v.assignment_action_id
    FROM per_people_f ppf,
    per_assignments_f paf,
    pay_assignment_actions paa,
    pay_run_results_v pay_v
    where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
    pay_v.assignment_action_id =paa.assignment_action_id
    if the pay.v in the where clause. I will got the exception. whereas,it's works fine.

  • How to Add a new fields in the selection screen of LDB.

    Hi All,
    I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
    So could you please tell me for that where i need to add the code for selecting the data.
    Thanks
    Roli

    Hi
    welcome to SDN forum
    If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
    if you wants to modify the std LDB of SAp means take the access key and to modify that code
    if you add the extra field you have to modify the where conditions in the code also
    see the doc
    A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
    LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
    Less coding s required to retrieve data compared to normal internel tables.
    Tables used LDB are in hierarchial structure.
    Mainly we used LDBs in HR Abap Programming.
    Where all tables are highly inter related so LDBs can optimize the performance there.
    Check this Document. All abt LDB's
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
    GO THROUGH LINKS -
    http://www.sap-basis-abap.com/saptab.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Re: **LDB**
    www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
    www.sap-img.com/abap/abap-interview-question.htm
    www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
    Gothru the blog which provides info on LDB's:
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Sample code
    TABLES: SPFLI,
    SFLIGHT,
    SBOOK,
    SCARR.
    START-OF-SELECTION.
    GET SPFLI.
    WRITE:/ ’SPFLI: ’, SPFLI-CARRID, SPFLI-CONNID,
    SPFLI-AIRPFROM, SPFLI-AIRPTO.
    GET SFLIGHT.
    WRITE:/ ’ SFLIGHT: ’, SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
    GET SBOOK.
    WRITE:/ ’ SBOOK: ’, SBOOK-CARRID, SBOOK-CONNID,
    SBOOK-FLDATE, SBOOK-BOOKID.
    GET SFLIGHT LATE.
    WRITE:/ ’ GET SFLIGHT LATE: ’, SFLIGHT-FLDATE.
    Regards
    anji

  • How to add a new status to the Status drop down menu in CRM

    Hi All,
    Help me guyz i am new to CRM,
    i have to add a new status to the Status drop down menu in CRM Sales Area.
    Please help me for steps.
    Thanks
    DST

    Hi,
    You can add New status to the Drop Down menu by defining a catalog,codegroups & code group profiles to that...... Once assigned assign them to the Subject profiles and assign this subject profile to the transaction type that is assigned.
    This would populate all the profiles that u have mentioned in the subject profile.
    Award points if this answer helps you.
    Regards,
    Ravi

  • How to add a new Field to the WEB User Interface in CRM 2007

    Dear experts,
    I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
    I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
    But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
    I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
    Each suggestion will be appreciated.
    Best regards,
    Raghu ram.

    Hi Raghu Ram,
    I think you added a new custom field using some method like EEWB etc.,
    Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
    These are the steps to diagnose:
    Method 1.Check the field properties in the model browser first.
      It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
      In such a case you need to find a BADI to change the field properties.
      For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
    Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
    Method 3. Check what are the field properties in the UI Configuration tool.
    Make sure it is not a display only field.
    Regards,
    Masood Imrani S.

  • How to add a new field to an existing Generic Search result list?

    Good day,
    I'm new to the concepts of the Generic Search Framework.  I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C".  This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
    From the *modification\generic-searchbackend-config.xml file, the existing
    <h4><property-group name="billing_resultlist_B2B_R3">
      <property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
      <property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
      <property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
      <property name="CURRENCY" type="hidden" />
      <property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
      <property name="PAYERS_GUID" type="hidden" />
      <property name="SD_DOC_CAT" type="hidden" />
      <property name="OBJECTS_ORIGIN" type="hidden" />
    </property-group>
    </h4>
    I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework.  I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
    After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
    I would greatly appreciate any help.
    Thanks,
    _kevin

    Hi Kevin,
    this means you are working in this section of the generic-searchbackend-config.xml
                 <property-group name="SearchCriteria_B2B_Billing"
                                 useSearchRequestMemory="true">
    Below this property
                    <property name="IRT_BDH_BILL_TYPE"                    
                              type="box"
                              entityType="BEART_BILL_TYPE"
                              tokenType="EXP"
                              requestParameterName="rc_documenttypes"
                              label="gs.att.lbl.doc.type"
                              UIJScriptOnChange="GSloadNewPageR3(this);">
                        <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>                   
                        <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                        <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                        <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                        <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                        <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5"  default="true"/>
                        <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" /> 
                        <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                        <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                    </property>
    please try adding this new property
                    <property name="DOCUMENT_STATUS(1)"
                              entityType="CL_CRM_REPORT_SET_STATUS"
                              tokenType="RAN"
                              type="hidden"
                              requestParameterName="rc_status_head1" value="C" />
    This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !      
    Philipp Koock
    SAP CRM Web Channel Consultant
    http://www.koock.net

Maybe you are looking for