How to add a non-strong-named .DLL to Assembly

I am trying to add a .dll file to assembly on a server (connected via RDP) for a WCF Service Application. When I try to add it in Visual Studio Command Prompt, it says "Failure adding assembly to the cache: Attempt to install an assembly without a strong
name." I tried signing the assembly in VS, but aside from toggling the signing and choosing the key file, every option is grayed out. And even then it's not considered strong named. Why are the options grayed out? Is there a way to add non-strong-named
DLLs to assembly? Otherwise, how do I sign the DLL?
Note: I am connected to a Sharepoint 2010 server using Windows Server 2008 and Visual Studio 2010. The project is called ListTasks2, as is the DLL. I have a project that has a similar naming -scheme and I was able to use GAC just fine for that DLL.

You need the source code to sign it. Do you have the source?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Strong named DLL cannot be detected in Protect Mode of Reader X

Hi, all
I have a DLL created by C# 2.0. I used it as COM object in my plug-in of reader to communicate with 3rd-party application which is used as a host.
Now, I have issue about "strong named DLL cannot be detected in Protect Mode of Reader X".
If I don't make it as strong named DLL, it can be loaded in plug-in with help of white-list.
But there will be a "Class not registered" COM error thrown if it's a strong named DLL.
How to solve this issue? Thanks very much~
By the way, it works fine if I disable Protect Mode. But it's not good solution to disable Protect Mode always. I am painful of this issue

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

[JSF 2.0] How to add a non-displayed comment in JSF xhtml files?

Hello!
I would like to know how to put a non-displayed comment in a JSF xhtml file.
Currently, a ** will be sent in the HTML output.
I've tried also:
*// My comment*
*<%-- My comment --%>*
and other ideas, but they are failing.
On the web, I red an ugly solution, implying to add one parameter in each faces-config.xml files our project could have, and asking JSF not to parse some statements (if I remember well).
Whatever, I am quite sure it was a solution for JSF 1.0 or 0.9...
There must be a clean way to write a comment, but I just can't find it.
How do I write a comment that is not displayed on HTML output, in a JSF xhtml file?
Regards,
Grunt.
Edited by: Grunt2000 on May 10, 2010 9:23 AM

Grunt2000 wrote:
Hello!
I would like to know how to put a non-displayed comment in a JSF xhtml file.
Currently, a ** will be sent in the HTML output.
I've tried also:
*// My comment*
*<%-- My comment --%>*
and other ideas, but they are failing.
On the web, I red an ugly solution, implying to add one parameter in each faces-config.xml files our project could have, and asking JSF not to parse some statements (if I remember well).
Whatever, I am quite sure it was a solution for JSF 1.0 or 0.9...
There must be a clean way to write a comment, but I just can't find it.
How do I write a comment that is not displayed on HTML output, in a JSF xhtml file?Does this help?
<context-param>
<param-name>facelets.SKIP_COMMENTS</param-name>
<param-value>true</param-value>
</context-param>I'm not sure if that works under JSF 2. If not, you can always use <ui:remove/>.

How to add some reference into naming/ejb service?

are there some ways to add some reference into naming/ejb service for them to visit my library/interface/service.
thanks for your reply.

I am not sure of what you are asking, can you elaborate please?
Check out the "Application Reference" concept at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/28/c9a3a9606f434ea757a3536d220704/content.htm">Application references</a>
Regards,
Kiran

How can I add a non icloud email address to icloud

how can I add a non icloud email addres to icloud

You can't. iCloud uses its own email accounts @icloud.com

How to import a web service into labview and make the assembly strong named signed?

I have used the web services tool to import my .net project files. I am then putting them into clearcase. In order for my dll's to work on a network im getting the error that they need to strong named signed. Is there anyway of strong name signing them with in the web services tool, or modifying the dll's after they've been created? Thanks for any help!

dbell0971,
I appreciate your willilngness to help on this issue. However, it doesn't seem like we are on the same page here.
When you import a webservice it creates an assembly. That assembly is .NET. In general you cannot run an assembly on a shared drive unless it is "trusted". You can make the assembly trusted by adding some classes and properties to it (i.e. strong signing it)- http://msdn.microsoft.com/en-us/library/xc31ft41.aspx
However, since WE are not creating the assembly, LabVIEW is, then we don't have the source code so we can't just strong sign it.
The question is simple- Can the Import Web Service Utility strong sign the assembly it creates?
Thanks,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to add dll library to application?

I start programmed the CVI a few weeks ago and I have a little problem. I must make an application layer for profibus master device. However I total do not know how to add dynamic library to program, because in another way I get the error: undefined symbol. I know that it very trivial, but I cannot find solution. I have a lib file and also I include file about device, but I still get the error – undefined symbol – can you help me?
Thanks very much for any advice or help

Dear laszku,
Are you looking for solutions to connect your CVI application with PLC? Because there are also solutions for that which are easy to use, and to implement with CVI.
If you want to use your DLLs, there are some on-line help, how to import them in CVI.
Basicaly there are two different method to import DLLs:
- static import, when you import the library in your CVI project. The dll will be loaded when the exe starts running. If there is an issue to load the library, you'll be able to get the error at compilation time.
- dynamic dll import, when you load the library at run-time. With this, you get the flexibility to control, when will be the dll linked to your exe in the memory, while running. The disadvantage is, you'll get errors only at run-time.
I recommend you some of our on-line tutorial, how to load DLL into your application in CVI:
CVI Help: Loading Dlls - This says: You cannot import DLLs directly into your project. You need to create DLL Import Library, which can be imported into your project.
To do so, look at this knowledge base: Creating Import Libraries for a DLL in LabWindows/CVI
You might get answers for your following questions at this FAQ page:
FAQ: Using Dynamic Link Libraries with LabWindows/CVI
Some help sites:
Rules for Using DLL Files
Linking to Functions Defined in a DLL From LabWindows/CVI
If you need dynamic linkink, you can get example code with this site:
How Can I Access DLL Functions in a LabWindows/CVI Program Without Including the Import Library in t...
I hope, I could help you to find the way how to import DLL libraries.
If you still couldn't solve the error after studying the links, please provide me more information, where, which symbol is missing, and also the full error message.
The error you get, can be caused by the linker or pre-compiler also, which doesn't find the symbol you requested. Please check the path of your library and dll also.
Best Regards,
Tamas Szekely
Applications Engineer
National Instruments

How to add dll file in plugin

Hi everybody,
I have a short question concerning the plug-in.
I created a plug-in using visual studio 2005 for Adobe effect cs4
but i want to add dll on that plugin so,how to add dll in that plugin
please help me!!!!
Thanks

Any other dependencies apart from C/C++ runtime, for example cuda
runtime which you cannot link against statically - you have to copy it
into After Effect support files, where the executable lives (or in
windows library directory, but that i would rather not do)!
Am 19.06.2011 16:15, schrieb shachar carmi:
to include external dependencies in the plug-in, go to:
Project Properties --> C/C++ --> Code Generation
and change the "Runtime Library" to "/MT"
this should make the compiler include the needed code from other DLLs in your code.

How to add dll file to EAR project

hi,
i am working with JNI . how to add .dll files to EAR for deployment in NetWeaver.
regards
Guru

HI
GOOD
GO THROUGH THESE LINKS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2583bbf9-0701-0010-8db5-a558e0c6f1fe
http://support.businessobjects.com/documentation/product_guides/boexir2/en/xir2_bip_install_en.pdf
THANKS
MRUTYUN

How to add table in SAP Non interactive forms in webdynpro java

Hi Experts,
I have a requirement in webdynpro java.I have a print button.On clicking print button a pdf will be opened.
This pdf will have data from the webdynpro view.I want to know how to add table in the adobe pdf.The webdynpro view will have many rows of table(rows will keep changing as per the size of the data output).How to send this data to adobe.How do we bind the node to the table in the adobe.How to automatically
Please suggest.
Thanks,
Rajani
Edited by: Rajani Nandagiri on Dec 26, 2008 8:58 AM

Rajani,
Take a look at below links, it will help you.
[Handling Dynamic Length Tables in Adobe Forms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0859ad1-53aa-2a10-78ae-99e41c407669]
[Integrate tables & Images in Adobe Web Dynpro|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/dynamic%20non-interactive%20pdf%20form.pdf]
[How to Handle Table Input and Output|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/adobe/how%20to%20handle%20table%20input%20and%20output.pdf]
[How Tou2026deal with Table input and display in Interactive Forms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00c4041d-188d-2910-6ea2-b4d5155f56e0]
Chintan

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

How to add MS Office add-in from inside a Thinapp 5 virtual application to a MS Office 2013 suite that is installed on a base image

Hi,
We have the following solution:
VMware Horizon View 5.3.1
Non-persistent Linked-clone pool with delete VM after logoff
Windows 8.1 Update 1 Enterprise 64 bit
MS Office 2013 32-bit installed on image
Thinapps registered for each user from logonscript with thinreg.exe command. Thinapps is located on a network share
Native Windows roaming profiles with appdata/roaming, appdata/local without appdata/locallow(persona management does not support Windows 8.1 in View 5.3.1)
This is our issue:
We have a 3rd party application with a couple Thinapp entrypoints(exe files) and in the Thinapp package process we also installed Office addins. We tested that the Add-ins was opened inside Outlook, Word and Powerpoint before post installation scan.
The problem is that the add-ins is not added to Office 2013 before or after the Thinapp is started on a test client.
I have tried several changes in the package.ini and virtual filesystem attributes(no registry changes yet):
Package.ini:
ChildProcessEnvironmentExceptions=WINWORD.EXE;EXCEL.EXE;POWERPNT.EXE;OUTLOOK.EXE;
ChildProcessEnvironmentDefault=External
ChildProcessEnvironmentExceptions=excel.exe;outlook.exe;powerpnt.exe;winword.exe
ChildProcessEnvironmentDefault=Virtual
VirtualizeExternalOutOfProcessCOM=0
DirectoryIsolationMode=Merged
RegistryIsolationMode=Merged
I have also read that you could make entrypoints to the locally installed Office 2013, but I get errors on the build process. ref. link: http://edwinfriesen.nl/content/?p=105#comments
The best thing would be if the add-ins were added in the logon process together with thinreg.exe, but if that is not supported, the add-ins must be added to Office either in a custom Office shortcut/entry point or after starting the Thinapp virtual application.
Remember that the application needs to registered every times the user logon, because we use a non-persistent View pool.
I would really appreciate if somebody could tell me how to add Office add-ins from inside a Thinapp virtual application/package to a locally installed MS Office 2013 suite on a Windows "base" image?
We do not want to add the whole Office suite to the Thinapp virtual package and not add the add-ins trough GPO,SCCM etc.

What about the COM object parameters in package.ini ?
We can live with scripting in logon or changed logon scripts etc.
And you don't no need to lock in the project files.
From package.ini documentation:
ObjectTypes Parameter
The ObjectTypes parameter specifies a list of virtual COM object types that are visible to other applications in
the physical environment. You can use scripts, such as VBScripts, to call objects that start captured applications.
An object type is registered to only one native or virtual application at a time. If you install Office 2003 on the
native machine and want to use a virtual Office 2007 package, you must determine whether to have the virtual
or native application handle the object types.
If you want the virtual Office 2007 to handle the object types, you can leave the ObjectTypes setting in the
Package.ini file, build the package, and register it using the thinreg.exe utility. If you want the native Office
2003 to handle the object types, you must remove the ObjectTypes setting from the Package.ini file before
building and registering the package.
You cannot add random entries to the ObjectTypes parameter.
You can only remove entries that were generated by the capture process.
Example: Starting a Virtual Application When a COM Object is Created
If a script or a native application creates an Excel.Application COM object or other COM objects listed in the
ObjectTypes parameter, ThinApp starts the virtual package.
[Microsoft Office Excel 2007.exe]
ObjectTypes=Excel.Application;Excel.Application.12;Excel.Chart;
Excel.Macrosheet;Excel.Sheet; Excel.Workspace

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a custom multimedia playback control to add a time line of what is being played?

How to add a custom skin in multimedia playback control to add a time line of what is being played? As it is being played...
I need a time line so any part of the what is being played can be found by time, ie at 1 minute and 30 seconds in and continues for 45 seconds out of a 50 minute audo.

If you're talking about a playback controller within the rich media annotation (RMA) then you need to write your own widget in Flash or Flex, and then place the video and widget files using the multimedia "Add Flash" tool in Acrobat instead of the "Add Video" tool. Aside from a bunch of proprietary code to handle events, commenting and the API (which you can live without for basic play-pause-scrub applications), video RMAs are just an embedded SWF file containing an FLVPlayback component. The skin and the video file itself are added to the RMA as resource entries. You can build your own version and have it display whatever controls you want, provided you know how to write ActionScript!
If you're talking about a controller that's external to the RMA (e.g. a series of links or buttons elsewhere on the page) then in the past you would use FLV video files and the 'cue points' feature that's built into Acrobat - however Adobe removed the ability to create FLV files in the latest version of CC, so unless you have CS6 or earlier it's a non-starter. Instead you can manually set playback start points using the special "multimedia operations" link action in your PDF - though stopping playback at a defined point is very difficult without FLV cues. For that you're back to writing your own widget.

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a non-strong-named .DLL to Assembly

Similar Messages

Maybe you are looking for