How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

Similar Messages

HOW TO WRITE ABAP PROGRAMMING IN JAVA BY USING NETWEAVER

HI,
i am working with bapi(mean is calling bapis in my java programs).
please tell me the how to write abap programs in nwds
Thanqqqqqqqqq
Guru

Hi,
Refer the following links..
http://manuals.sybase.com/onlinebooks/group-iaw/iag0203e/iadgen2/@Generic__BookTextView/24685
and this blog
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Regards,
Uma

How to add funded program in report wirter in 4FBUDCON?

Hi!
How can I add the period/month and funded program in the report painter 4FBUDCON? I can't find the any characteristics values of them fromt he basic key figure of HSLT?
Thanks.

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

How to tranport ABAP program?

I changed the include X (needed for report Y). How I can tranport the include X from Dev system to QA system? When I go to Adminstrator Workbench: Transport connection I can see All Object but which of them should I use to add ABAP program to be transported?
TIA

Hi,
Go to SE38, Display your program.
Then in upper menu bar, Go to "Goto" tab, there u will find the option of "Object Directory Entry". Here you can assign the package and then transport request.
Transport the same request and your program will be moved to next system.
Hope it helps.
Regards,
Yogesh.

How to create a program that accepts 5 digits from the user between 0 and 9

how to create a program that accepts 5 digits from the user between 0 and 9 then put them in ascending order using link-list method..

You can use a scanner to get user input from the command line.
import java.util.*;
public class Test {
 private List<Integer> list;
 private Scanner in;
 public static void main (String... args) {
 new Test ();
 public Test () {
 list = new LinkedList<Integer> ();
 in = new Scanner (System.in);
 for (int i = 0; i < 5; i ++) {
 System.out.format ("Please enter a number (%d more): ", (5 - i));
 list.add (in.nextInt ());
 Collections.sort(list, new Comparator<Integer> () {
 public int compare (Integer i1, Integer i2) {
 return i2 - i1;
 System.out.println (list);
}

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

How can I add a language on pages (Greek) to check the spelling when that language is not on the list?

how can I add a language on pages (Greek) to check the spelling when that language is not on the list?
I can see other languages available for spelling check, but not Greek and I dont see how to add it.
I have added the Greek keyboard on the Mac, so I can write in Greek , but I dont know how to check the spelling in Greek on pages

You can try to add a 3rd party spellchecker
http://milaraki.com/blog/2010/11/greek-spelling-at-pages-how-to/

How to add a graphic watermark that is bigger than the photo?

How to add a graphic watermark that is bigger than the photo?
     Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
     Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
     The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
And below is what it should look like, so that Lightroom doesn't clip the photo.

Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

How do I go about embedding a jquery plugin into the building process of Adobe Muse?

How do I go about embedding a jquery plugin into the building process of Adobe Muse?

Many of the "Edge" fonts offered in Muse for web font use are available as open source fonts from Google or other sites like Font Squirrel. For example, a company may want to use the Exo typeface in their logo. You can use Exo as a web font within a web site created in Muse. For general graphics work, like creating a logo and other branding work, the same typeface can be installed as a system font from the sources I mentioned.
The newest version of Muse will now allow you to use SVG graphics -a vector-based graphics format for the web. SVG objects can be scaled to any size without showing pixel jaggies. You can create vector-based type objects using any system font in Adobe Illustrator or other similar applications capable of saving SVG. Within Illustrator you can creatively manipulate those type objects, or do subtle things like adjusting letter spacing, then output it as an SVG image. I don't particularly care for the default letter spacing of many web fonts, so SVG is a fairly decent alternative.
Most new web browsers support SVG properly. Old versions of Internet Explorer (8 and earlier) and some older mobile web browsers don't support SVG without user-installed plug-ins. Those web browsers are disappearing quickly.

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Hi I am running a dual core Win7 64bit PC with Firefox Regular and Nightly on it. I also have 32bit Win XP Virtual PC on the same PC with Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ??? TIA... Rick...

Hi... I am running a dual core, Win7 64bit PC, with Firefox Regular and Nightly on it... I also have 32bit Win XP Virtual PC on the same PC with Regular Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ???

I assume that you have separate Profiles for the Release and Nightly installations.
https://support.mozilla.com/en-US/kb/What+is+Firefox+Sync
Add each Firefox Profile to your Sync account as a '''new device'''. 
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Script for checking the replication process in Netscape Directory Sever 4.1

Hi,
We are using Netscape Directory Server 4.1.6 in our production environment. Where we want to know is there any script available to check the replication process. Or can we write a script to check the process.
Waiting for your replies at the earliest.
Thanks,
Syed A.

Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out.

How to add Abap program in process chain to check the another process chain status and do accordingly

Similar Messages

Maybe you are looking for