How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

Similar Messages

How to add rows in table control for data recording BDC?

hello,
pl tell me the way to upload data through BDC in table control of screen .
how to add fields inrecording of table control?
Please give some code in this regard.
I am generous in giving points..pl help!

Hi,
While doing code under recording first you need to do the recording with sample data under a particular transaction like T-code XK01 (Vendor creation).
Take an example of create vendor using T-code XK01:
Go to t-code 'SHDB' under make recording for XK01 with sample data and once if you complete the recording means after vendor creation check the source code bye by pressing the button 'Program', it shows the total coding for recording of what you entered the test data.
Then you will create one program and copy that source code of recording into your program, and now you have to remove the values at perform statement and give the internal table field name.
Like that you can develop your own code along with your validations.
my best suggestion is dont see the example code of recording method because any one for standard t-code should get the code from recording with sample data, so first tryout with your own recording method and you can understand the code step by step.
With these I hope you will get some idea of recoding method.
Let me know for further doubts.
Regards,
Vijay.

How to add radiobutton in table control

dear all
i want to add radiobutton in table control and want to select the corresponding data
& display that selected data in another screen
please guide.
Moderator Message: Please search for available information before posting.
Edited by: kishan P on Jun 3, 2011 4:08 PM

Hi,
Go through the below link.
<<link removed by moderator>>
Hope it will be useful to you.
Edited by: kishan P on Jun 3, 2011 4:07 PM

SHDO - add column in table control in CRMD_ORDER

Hi,
is it possible to add a EEWB generated column to table control (on the first screen)
in TCODE CRMD_ORDER ?
did anyone ever do that ?
thank you,
Regards,
michal

hehe
it would be great to get feedback on everything here but I'd better obey the forum rules
too many opened forums and I sometimes get a little lost
Regards,
michal

How to delete columns in table control (tab Services) for transaction ME51

Hi, gurus!
We're facing this problem in our upgrade: we have a batch input (ME51) in order to create purchase requisitions, but we get an error with the dynpro data (program: SAPMM06B, dynpro: 0102).
We are sure we populate all the required fields in that screen.
The only possible reason we find for that error is the fact that we have two new entries in table control (in tab services=> Current settings there are 67 fixed columns)
We had to add in table T162V (which previously had only 65 columns for each variant): ESLL-SRVMAPKEY y ESLL-EXTERNALID, as described on note 1382685, so table control and table T162V could have same number of fields.
We guess we could solve the batch input error deleting those fields in both table control and T162V, but don't know how.
We really would appreciate any clue.
Thanks in advance.
Best regards,
J. Madariaga

It's an own batch input.
The error is: "Batch input information for dynpro SAPMM06B 0102 does not exist", but the fields in that screen are alright.
And that batch input works fine in another client with same patch level, but without fields ESLL-SRVMAPKEY and ESLL-EXTERNALID in table T162V, so I guess that could be the problem (not sure about it, of course).
Regards,
J Madariaga

How to delete columns in table control

hi
1) I have creted a table control with five columns
now i want to delted the tow of the five coluent pls let me know how to delete it
1) also i am useing a module pool programming (code if needed i will paste)
in that the requirment is to select data from a ztable and aloow user to enter new ship to data only whne the corresponding records exists in kna1 table
and to populate the name1 value automatically from table kna1 whne user enters ship to number
pls suggest
regards
Arora

Hello,
Requirement 1
i believe you need to delete a row from the control table based on the user input...
if thats the case then definitely in the control table the multiple line selection will be activated .
in PAI of the control table screen...
if user has clicked delete.
loop at control table records..
if the selection code for the line is 'X'.
Delete from the internal table.
endif.
endloop.
endif.
Requirement 2..
i will give an outline on the checks
a)first let the user enter the data...in the PAI of the screen...write the code to do the checking....if your requirement is not satisfied provide a warning/error message or delete the record and give a message stating the reason for deletion...
in PAI.
for a control table...
loop at the table records
select from table and check if user record is O.K
if not delete the record and give message
endif.
endloop.
b)similarly inside the PBO write code to fetch the name1 from Kna1 table for the ship to number if that ship to number is not empty
in PBO of that screen
if ship_to is not initial.
select text for ship_to number to the display field
else.
clear the display field
endif.
reward if the suggestions were useful
Regards
Byju

How to add long text in bdc for transaction fb01 ?

IN the existing program of bdc fb01
i have to add a long text field
but it gets stuck while i process in sm35
is there a fm to add the field directly
thanks in a advance

Hi
You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
see the sample code and do accordingly
REPORT zmm_longtext_sm
       NO STANDARD PAGE HEADING
       LINE-SIZE 255.
Description :   This Program is used to Upload the Service Master
             :   Long Texts using the Fun Module CREATE_TEXT
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
        asnum like asmd-asnum,    " Service No
        text LIKE tline-tdline, " Long Text
      END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
        INCLUDE STRUCTURE tline.   " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname,   " Object Name
       dl_lan TYPE thead-tdspras.   " Language
Constants
CONSTANTS:
Object ID for Long Text of Service Master
c_best     TYPE thead-tdid VALUE 'LTXT',
c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
Parameters
PARAMETERS p_file LIKE rlgrap-filename.
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
Upload the Texts
SORT itab BY asnum.
LOOP AT itab.
    dt_lines-tdformat = 'ST'.
    dt_lines-tdline = itab-text.
    APPEND dt_lines.
    dl_lan = sy-langu.
    concatenate '00000000000' itab-asnum into dl_name.
Call the Function Module to Create Text
    CALL FUNCTION 'CREATE_TEXT'
      EXPORTING
        fid         = c_best
        flanguage   = dl_lan
        fname       = dl_name
        fobject     = c_material
        save_direct = 'X'
        fformat     = '*'
      TABLES
        flines      = dt_lines
      EXCEPTIONS
        no_init     = 1
        no_save     = 2
        OTHERS      = 3.
    IF sy-subrc <> 0.
      WRITE:/ 'Long Text Creation failed for Service No'(001),
             itab-asnum.
    ELSE.
      WRITE:/ 'Long Text Created Successfully for Service No'(002),
             itab-asnum.
    ENDIF.
    AT END OF asnum.
      REFRESH dt_lines.
    ENDAT.
ENDLOOP.
<b>Reward points for useful Answers</b>
Regards
Anji

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to Enable and Disable column in Table Control.

Hi all,
I want to make certain column of Table control as Enable or Disable on Button action.
Enable means ready for input and Disable means not ready for input.
Please send me sample code.
Thanks in advance.

Hi Vipin,
    You have to loop through the table columns to set the properties in the PBO of your screen.
Here is the sample solution.
delcare a workarea for the columns in the table control in your top include.
Table Control .
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
DATA: WA_COLS LIKE LINE OF TAB1-COLS.
in your screen
PROCESS BEFORE OUTPUT.
MODULE INTIALISE_100.
*&      Module 0100_INTIALISE OUTPUT
MODULE INTIALISE_100 OUTPUT.
    LOOP AT TAB1-COLS INTO WA_COLS.
      WA_COLS-SCREEN-INPUT = 1.
      MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
    ENDLOOP.
ENDMODULE.                 " 0100_INTIALISE OUTPUT
modify the screen-input property as required for the table control columns.
Please provide points if helpfull.....
Thanks,
Karthik
Message was edited by: Karthik
        Karthikeyan K

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to get sum of quantity column in table control

Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
    CHAIN.
       FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
    endchain.
    MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...

Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
     MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
     COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM

How to add column in table control for transaction APPCREATE

Similar Messages

Maybe you are looking for