How to add custom infotype in ALE for HRMD_A message type

Hi Friends-
Pls help me for our req we are using HRMD_A Message Type for HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type how i can do that pls let me know ?
<<removed_by_moderator>>
Regards
Meeta & Glory
Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

Similar Messages

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

Transfer Custom OM Infotype data through ALE for HRMD_ABA Message type

Hello Folks,
I have created a Custom OM Infotype.When i run the PFAL transaction. All the standard infotype data is getting filled, but i dont see custom infotype data getting filled.
Example: HRP9001 is the custom infotype.
Please let me know the step by step process to populate the Custom infotype data in ALE Transfer.
Thanks & Regards,
Nishanth Kumar

I think function module RH_MASTER_IDOC_DISTRIBUTE_HRMD shows some odd behaviour. It calls EDI_DOCTYPS_OF_MESTYP, which returns the name of the extension in an internal table named "doctyps". But later on, function module MASTER_IDOC_DISTRIBUTE is called with a structure "f_idoc_control". In this structure, the field "cimtyp" should hold the name of the extension, but it NEVER gets filled, although the value is present in doctyps-cimtyp.
So what I have done, is to activate userexit #004, which is called just before MASTER_IDOC_DISTRIBUTE and modifies structure f_idoc_control, if desired.
Call transaction CMOD and create a project in a non-SAP namespace: Zxxxx. The enhancement we need is "RHALE001" (HR-CA: Enhancement for ALE functionality in HR). One of its components is EXIT_SAPLRHA0_004, which consists of include ZXHALU08. In this include I called EDI_DOCTYPS_OF_MESTYP again to fill f_idoc_control-cimtyp.
Here is my code for include ZXHALU08
DATA: z_doctyps TYPE STANDARD TABLE OF edidocs WITH HEADER LINE.
CALL FUNCTION 'EDI_DOCTYPS_OF_MESTYP'
EXPORTING
    mestyp         = f_idoc_control-mestyp
TABLES
    doctyps        = z_doctyps
EXCEPTIONS
    invalid_mestyp = 1
    OTHERS         = 2.
IF sy-subrc = 0.
LOOP AT z_doctyps.
    f_idoc_control-cimtyp = z_doctyps-cimtyp.
ENDLOOP.
ENDIF.
Hope this helps

ALE - Status 52 Idocs for HRMD_A message type

HRMD_A Idocs in target system are not completely posted, turning into status '52'. Most of the times the infotype 1001 idoc with relations ship P->S arrives before the idoc which has the actual objects(P, S) causing 'Relationship imposible because the object does not exist". We use program RBDAPP01 for inbound processing of Idoc which should take care of Serialization based on the time stamp of idoc creation in source system.
Change pointors for Message type HRMD_A are processed using program RBDMIDOC in source system.
It is unlikely that relationship P->S is created without object P being created in the source system. So the change pointors should create the idocs in the same sequence. But it is not happening.
Any help on this appreciated.

Hi Santosh,
If you haven't found by now the .... here is the Solution:
First change the size of table T77S0 check out note 305688
Then process the IDOCS again - check out note 363187
Regards
Luis

Using HRALE00INBOUND_IDOC BADI for HRMD_A message, infty 0105

Hello Experts,
I am using HRALE00INBOUND_IDOC BADI for HRMD_A message type (for HR master data and infotype 0105).
I have configured OUTBOUND and INBOUND systems. I have created Z programe for idoc generation.
In Z program, changing only one filed i.e. USRID_LONG (EMAIL Address).
After executing the Z program IDOC is generating and if we see in WE05 then it is in YELLOW color with status 30 and 01.
After that i am using we19 or BD87 and process the IDOC then it will come in green color. I am checking on INBOUND system, IDOC is receving successfuly with green color and with updated data.
But If we go to PA30 transaction code and check to the email address (infty 0105 and subtype 0010) that is not updating.
Why? If i am receving IDOC successfuly then why Data base table is not updating?
Thanks in advance,
Ranveer

Hello Anatony,
BADI HRALE00INBOUND_IDOC is trrigering in INBOUND side.
Now data is updating, but problem with data.
s_e1plogi-plvar = '01'.
s_e1plogi-otype = 'P'.
s_e1plogi-objid = '00000014'.
s_e1plogi-opera = 'U'.
APPEND s_e1plogi.
int_edidd-segnam = c_e1plogi.
int_edidd-hlevel = '02'.
int_edidd-sdata = s_e1plogi.
APPEND int_edidd.
s_e1pityp-plvar = '01'.
s_e1pityp-otype = 'P'.
s_e1pityp-objid = '00000014'.
s_e1pityp-infty = '0105'.
APPEND s_e1pityp.
int_edidd-segnam = c_e1pityp.
int_edidd-hlevel = '03'.
int_edidd-sdata = s_e1pityp.
APPEND int_edidd.
U for update. If sender system have data for 0010 subtype, and recevier side 10 subtype is blank. In that case infotype 0105 is creating, but if infotype is already available on INBOUND system and wants to update, in that case data is not updating and IDOC in red color with 51 status. Message is " Infotype 0105 cannot be updated on database table PA0105".
My logic is for update....
select * from pa0105 into table int_pa30
              where pernr = '00000014'.
int_pa30-usrid_long = 'ABC1 ATTHERATE SAP.COM'.
modify int_pa30 transporting usrid_long
where usrid_long = 'XYZ ATTHERATE SAP.COM'.
*--To send the data to 510 Client thru IDOC.
loop at int_pa30.
    int_pa0105-infty = '0105'.
    move-corresponding int_pa30 to int_pa0105.
    append int_pa0105.
endloop.
So, where is my fault kindly update me.
Thanks in Advance,
Regards,
Ranveer

How to add custom Template transaction types ( for Quote ) ?

How to add custom template in transaction types?
Note : I have gone through below note. But not getting appropriate solution for this.
982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
Thanks in advance..
Sameer

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to Add custom Attribute in XML

How to add Custom attribute recusrivly. With sequence order.
//Before xml:-
var myxml:XML=
<root>
<leval0 >
<leval1 >
<leval2></leval2>
<leval2></leval2>
</leval1>
<leval1 >
<leval2></leval2>
<leval2></leval2>
</leval1>
</leval0>
</root>
////After xml:
var myxml:XML=
<root>
<leval0 levalid="0" >
<leval1 levalid="0_0" >
<leval2 levalid="0_0_0"></leval2>
<leval2 levalid="0_0_1"></leval2>
</leval1>
<leval1 levalid="0_1" >
<leval2 levalid="0_1_0"></leval2>
<leval2 levalid="0_1_1"></leval2>
</leval1>
</leval0>
</root>

//call this method
            trace(addAttribute(myxml));
//method
            private function addAttribute(node:XML, depth:String = ""):XML
                if (node.hasComplexContent())
                    var count:int = 0;
                    var prefix:String = 0 < depth.length ? depth + "_" : "";
                    var currentAtt:String;
                    for each (var nodeItem:XML in node.children())
                        currentAtt = prefix + count;
                        nodeItem.@levalid = currentAtt;
                        addAttribute(nodeItem,currentAtt);
                        count++;
                return node;

How to add an Infotype to an exsting Infoset (ad hoc query)

Hi,
How to add an Infotype (Ex. 0025) to an exsting Infoset (ad hoc query)?
I was trying by clicking on 'Extras' tab & create...I get three options, create field, create table or create structure.
I am not sure which to use or is there any other way? Pls. let me know the steps...
Also what is this 'Package', which is aked whenever you create or change an Infoset.
Pls. suggest.
Tnx
SKR

I was able to add the infotype by adding the table as PA0025 & include all the fields in the field group.
When I check, I get the following error:
"Access to PA0025 with sequence no. 01"
Message Text
Access to PA0025 with sequence number 01
Technical data
Message type__________ W (Warning)
Message class_________ AQ (Message texts for SAP Query)
Message number________ 006
Message variable 1____ Access to PA0025 with sequence number 01
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______ 4 (Level of detail 4)
Problem class_________ 3 (medium)
Sort criterion________
Number________________ 1
Do we need to input the sequence no. as 00? or is their anything else that I have to maintain?
Tnx
SKR

Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

In Advanced search Page, How to add custom column under property restrictions?

Hi,
The Navigation control can be added into your HTML page in the Snippet Gallery:
The two links below about how to create HTML master page and adding snippets needed into it for your reference:
http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
Feel free to reply if there still any question.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to push custom infotype details to Standard Log Report

Hi Experts,
i am using S_AHR_61016380 SAP Standard Report for Log Change Data in
the report development. However, the standard report for logged changes
does not capture the long term documents run for the custom infotype.
it is only giving the logged changes for the standard SAP infotypes
and it doesnot capture any details for the custom infotype.
We are looking a possibility on how to push custom infotype details to S_AHR_61016380.
Pls suggest in case you have any inputs for the same.
Thanks & Regards,
Kishore.

Hello Amith,
As u said i have created a Z program, and also i have used the following FMs.
1. 'HR_INFOTYPE_LOG_GET_LIST'
2. 'HR_INFOTYPE_LOG_GET_DETAIL'
Using these FMs i am able to get log records from the standard infotypes but i am unable to fetch data from the custom infotype tables.
Please give me any solution to read the log records from the custom infotype tables.
Thanks,
Kishore

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

How to add Custom Relationship in MSS Employee Search Drop down

Dear Sap Fans,
I would like to link Custom Drop down link at following path.
Manager Self-Service->Team->Employee Information->General Information->Employee Selection
Drop Down 1. Direct Reports
          2. Employee from Organization Structure
          3. Employee from Organization Units
          4. Who's Who
We would like to add one more custom drop down. Can any one suggest how to add custom drop down in this list ? We have created custom relationship in R/3 but it is not showing in Portal.
Your prompt reply highly appreciated and points will be rewarded.
Regards,
Ashish Brahmbhatt

Barin,
I have done settings in back end. I have created new realtionship for evaluation path. I am not able to see that link on portal. How/From Where I can use object and data provider tool and eventing for config ?
rds,
Aashish

How to add customer group(KNVV-KDGRP)in the standard report?

Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shah

Hi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards

How to add custom attributes to UME

hi gurus,
I have developped an appliation in that I want add custom attributes to UME for the sake of retriving the BrandType.
Please give me suggestion how to do this.
Thanks in adance.
Lohi

Hi Lohi,
UME setup
1)     go to Configuration tool (C:\usr\sap\J2E\JC02\j2ee\configtool\consoleconfig.bat)
2)     For Global server configuration->services->com.sap.security.core.ume.service define property ume.admin.addattrs as BU_PARTNER and for ume.admin.self.addattrs as <empty>. (to set value select entry, input value in Value field and click Set)
3)     Click Apply changes button on the toolbar.
4)     Restart server.
5)     Login to http://<server_name>:<server_port>/useradmin/index.jsp and define BU_PARTNER property.
Code:
try {
     final IWDClientUser wdUser = WDClientUser.getCurrentUser();
     final IUser user = wdUser.getSAPUser();
     final String[] attribute = user.getAttribute(
          "com.sap.security.core.usermanagement",
          "BU_PARTNER");
     if( attribute==null || attribute.length == 0 || !Utils.isNotEmpty(attribute[0]) ) {
          wdComponentAPI.getMessageManager().reportMessage(...);
          return;
     } else {
          buPartner = attribute[0];
} catch (final WDUMException e) {
     wdComponentAPI.getMessageManager().reportMessage(...);
Best regards, Maksim Rashchynski.

How to add custom infotype in ALE for HRMD_A message type

Similar Messages

Maybe you are looking for