How to push custom infotype details to Standard Log Report

Hi Experts,
i am using S_AHR_61016380 SAP Standard Report for Log Change Data in
the report development. However, the standard report for logged changes
does not capture the long term documents run for the custom infotype.
it is only giving the logged changes for the standard SAP infotypes
and it doesnot capture any details for the custom infotype.
We are looking a possibility on how to push custom infotype details to S_AHR_61016380.
Pls suggest in case you have any inputs for the same.
Thanks & Regards,
Kishore.

Hello Amith,
As u said i have created a Z program, and also i have used the following FMs.
1. 'HR_INFOTYPE_LOG_GET_LIST'
2. 'HR_INFOTYPE_LOG_GET_DETAIL'
Using these FMs i am able to get log records from the standard infotypes but i am unable to fetch data from the custom infotype tables.
Please give me any solution to read the log records from the custom infotype tables.
Thanks,
Kishore

Similar Messages

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

How to add custom infotype in ALE for HRMD_A message type

Hi Friends-
Pls help me for our req we are using HRMD_A Message Type for HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type how i can do that pls let me know ?
<<removed_by_moderator>>
Regards
Meeta & Glory
Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

Updating a customer infotype detail table (in PIQSTM) from an interface

We have a customer infotype that has a header table (HRP....) and a detail table (HRT.....) and we have this attached to transaction PIQSTM. This works fine. However, we now have a requirement to update the infotype via an interface and we have hit a problem using the standard function modules. We have tried, for example, using FM 'HRIQ_PNNNN_MAINTAIN' but have found that whilst it updates the header ok, if any detail record exists it is always overwritten. We need to keep the existing detail records attached to the same header.
I've debugged the way our tables are updated when saved in PIQSTM and can see that there is a lot going on with buffers. It seems that buffers are updated and then FM 'RH_BASE_UPDATE_DB_DIALOG' is called, ultimately resulting in an insert to our detail infotype table. In our interface program, obviously I would prefer not to update the table directly. I guess BDC is always an option but again, I'd prefer not to use it if possible.
Has anyone out there done this and can offer me any advice ?
thanks,
Malcolm.

Malcom,
Try to feed old HRT record and New records(from interface) to Insert/update info-type function module.
Thanks,
Prabhat Singh

How to integrate custom infotype in IMG

Hi,
I am working on ESS MSS consultant and having a doubt on how the process will take place to embed custom Infotype to Personal Information application at IMG level. I mean how the communication flow will take place between these two?
If anybody having complete steps or flow please share and help me to get familiar on this area.
Appreciate your kind support & thanks in advance.
cheers
Dev

We have home page frame work and service specific settings
In the homepage frame work we define how the portal should look like
In the service specific settings we define the settings for various services which are available in portal, such address, time related, payments and benefits this data will come from respective infotypes
thanks

How to make custom data validation on standard form.

Hi,
I have some little OAF experience. I have extended VO so far but I am still newbie.
I need to make custom data validation on standard form.
I Oracle Credit Management module on "Create Credit Application: Applicant" form I need
to validate chosen currency against customer setup (whether there is customer profile amount for the currency).
The page is /oracle/apps/ar/creditmgt/application/webui/ARCMCREDITAPPPAGE
There are controllers on the page:
oracle.apps.ar.creditmgt.application.webui.creditAppContentFooterCO 115.14.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationPageCO 115.6
oracle.apps.ar.creditmgt.application.webui.creditAppRegion2CO 115.13.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationCO 115.8.15104.3
oracle.apps.ar.creditmgt.application.webui.creditAppRegion1CO 115.28.15104.4
oracle.apps.ar.creditmgt.application.webui.creditAppBusBackCO 115.6
oracle.apps.ar.creditmgt.application.webui.OCMApplicantInfoRNCO 115.4
creditApplicationPageCO is pageLayout controller.
Please direct me how to achieve it.
Which controller should I extend (if any)?
How to get values from the page (customer site id, currency) and how to run custom sql in my CO class ?
Regards,
Marcin

Hi Marcin,
You have to find your GO button is handled in which standard controller, (if you click on the about this page, you should be able to identify the controller,
or you can download all the controller .class files and decompile and check the logic).
Then extend that controller(which has the Go button logic, you can see how it has been handled.),
The usual way to check is
if(pageContext.getParameter('<Go button name>') !=null)
Since you want to validate first your custom validation, in the extended controller ProcessFormRequest
dont call the super.processFormRequest unless your validation is success.
Call the super at the end.
Inside your extended controller you have to find your AM and then your required ViewObject to get the user entered values.
Thanks,
With regards,
Kali.
OSSi.

How to populate custom fields in SAP standard Basic type DELFOR01(E1EDK09)

I've a requirement to include and populate 2 custom fields in SAP standard basic type DELFOR01 and Segment E1EDK09 (it is at hierarchy level 1 ) .
The requirement looks very simple but for this, as per my knowledge, I have to create a new Basic type with the copy of segment E1EDK09 and attach it to outbound process code and write my own function module to populate the segments.
It seems ok but the there are some existing codes in the user-exits for the SAP standard function module.These codes will not get triggered.(Or I've copy the user-exits code in my FM)
Can we do it any other way to handle this kind of situation?
Thanks in advance for your suggestions and help.

Hi Phani,
You have done it correctly. ECC additional data to be moved to EWM, 1. you need to enhance the CIF for master data/ bapi to populate the data in the custom field in EWM. 2. Make your your are not enhancing only one structure. You need to do it in the CI includes so that the field is available in all the related tables/structures.
3. The BAPI/FM which updated these tables will take care automatically to update the custom field data if the field is correctly added in all the tables.
4. If the custom fields are added correctly and still the data is not getting saved , then need to check the mapping of the custom field and bepi extension.
Let me know if this helps.

How to Get Customer Classification details

Hi All,
I have classification data in Customer Master ( Extras->classification in XD03)
In that I have Class : US_ADDITIONAL_DATA
and following are characteristic description and Values:
GUID Number from GIS :
E-invoicing : Yes.
I want to fetch these data for a customer ....How can I do this..
Is there any Function module for this........
Thanks and Regards,

Use this function module.
CLAF_CLASSIFICATION_OF_OBJECTS.

How to add custom error message in standard application log of change doc.

Hi,
While saving chnage document I need to add raise an error on specific condition. As Error messages is being shown in application log I added custom message in include LCRM_1O_UIF15 by using BAL_LOG_MSG_ADD FM however it is not showing in the screen. What could be the reason? Can anybody please explain?
Rgds
Sudhanshu

Muhammed,
Have you tried throwing a JboException in your AM code?
John

How to give Selection Parameters text in Standard SAP reports?

Hi,
I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen.
But I am not able to give text to the selection parameters.
I checked with Modification overview, its not allowing me to put text to custom Selection screen parameters.
Regards
Mohinder Singh Chauhan

Hi Friends,
I had created a dynamic selection text for a select-option created using Implicit Enhancements.
The select-option field is for MARA-MTART and the dynamic text i had given in the code is "Material Type".
But my client wants it to refer to the data dictionary reference so that it will print the labels given there and especially in the logon language.
Generally it can be done by selecting the checkbox next to the select-option, available in the Text Elements/Selection Texts Screen of the ABAP Editor.
So how to check that box(i.e., how to refer the data dictionary reference) dynamically?

How to display custom error message in Job log for batch processing

Hi All,
I am rexecuting one R/3 report in batch mode and i want to display all the custom error i have handled in job log when its executed from SM36,SM37. The custom error are like 'Delovery/Shipmet doe not exits' or others which we can display in online mode like message e100(ZFI) or any other way and accordingly we can handle the program control like come out of the program ro leave to transaction'Zxxx' or anything. But i want my program to be executed completely and accumulate all the error in job log of batch processing.
Can anyone tell me how can i do so...
Thanks,
Amrita

Hi,
Thats what i have done from the begining. I have written message like this:
Message i100(ZFI).
I was hoping to see this message in the log. But i cant see. Can you help me pleae...

How to show custom header in pdf generated from report

Hi,
I have created a report that is used to display Leave record of employees in an organization. After which it creates a pdf file and send it to respective HOD.
In this case I am trimming generated output and sendinf only required fields to the pdf.
When pdf is getting generated it shows program name as Title of that report.
I want to change this header to my own header along with some variable but not sure how I can do so.
I have also tried TOP-OF_PAGE but problem in this case is that I am still getting program name along with it.
To generate pdf I have used function :
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid   = spoolid
      no_dialog     = ' '
    importing
      pdf_bytecount = l_no_of_bytes
      pdf_spoolid   = l_pdf_spoolid
      btc_jobname   = l_jobname
      btc_jobcount = l_jobcount
    tables
      pdf           = l_pdfdata.
Then I had converted this pdf to Binary
call function 'QCE1_CONVERT'
    tables
      t_source_tab         = l_pdfdata
      t_target_tab         = lit_record
    exceptions
      convert_not_possible = 1
      others               = 2.
Then I had created subject matter and used FM : SO_NEW_DOCUMENT_ATT_SEND_API1: to send mail to respective HODs.
I tried dubbing it but couldn't get any variable which is holding program name.
Sorry for putting in wrong forum.
so Closing it from this forum and raising the same in ABAp-General forum.
How to change header of pdf in generated report
Edited by: gaur.yagyesh on Apr 16, 2010 4:03 PM

To make it more clear to my question.
I am using sun one webserver 6.0 sp6.
I need to enable custom header on the webserver so that any request having a custom http header coming to webserver should be captured by the webserver.
Thanks,

How to push custom infotype details to Standard Log Report

Similar Messages

Maybe you are looking for