How to add DFF columns in custom layouts?

Hi,
I need to create a new Layout for Asset Additions to include DFF (DFF: Asset Category) columns in the layout.
When I tried to create a new layout, I could not find the DFF columns in the list.
Could any one suggest me, how to enable these DFF columns in the 'Define Layout' column list?
Thanks,
Harish

Hi Harish,
Asset Category is a Key Flexfield, not a DFF. DFFs are identified by columns ATTRIBUTE1, ATTRIBUTE2, ..., whereas key flex fields are internally stored in another table (here FA_CATEGORIES).
To be able to give you a complete answer: Is your Integrator the standard or a completely custom made?
br, Volker

Similar Messages

JAEHYLEE (R12 ADI) How to add DFF in Web ADI

Goal
How to add DFF in Web ADI
Solution
ADI Mass Addition Template Layout Define에서 DFF를 사용하기 위해서 아래 ER이 현재 진행중이고 그 전에 사용하기 위해서는 아래와 같은 Datafix를 Workaround로 사용하여야 합니다.
Please do the following in the test instance first and if satisfied migrate to production
1.Setup-->Financials>Flexfields>Descriptive>Segments
Query the Mass addition DFF and Category flexfield
2.Both the above is to be defined exactly the same
3.Reference field for both should be ATTRIBUTE_CATEGORY_CODE
4)login to sqlplus apps account and run the following script
sql
- make sure it runs without errors, then commit. Otherwise rollback. This
script should not be run over again, therefore verify the outcome.
- restart the apache listener
- login to apps and navigate to the Webadi Define Layouts page, under FA
responsibility.
- choose a layout for the Additions integrator, include the "Descriptive
Flexfield" and "Context".
- Test it.
SCRIPT
===========
set serveroutput on size 1000000
Declare
content_code varchar2(1000);
interface_code varchar2(50) := 'FA_MASS_ADD_INTERFACE';
begin
dbms_output.put_line('Start add descriptive flexfiedl to Additions
integrator: ' || interface_code);
dbms_output.put_line('Updating attribute columns in bne_interface_cols_b')
Update bne_interface_cols_b
set display_flag = 'N' ,
val_type = 'DESCFLEXSEG',
group_name = 'MASSADD_DF'
where application_id = 140
and interface_code = 'FA_MASS_ADD_INTERFACE'
and interface_col_name in ('ATTRIBUTE1','ATTRIBUTE2',
'ATTRIBUTE3','ATTRIBUTE4','ATTRIBUTE5','ATTRIBUTE6',
'ATTRIBUTE7','ATTRIBUTE8','ATTRIBUTE9','ATTRIBUTE10',
'ATTRIBUTE11','ATTRIBUTE12','ATTRIBUTE13','ATTRIBUTE14',
'ATTRIBUTE15','ATTRIBUTE16','ATTRIBUTE17','ATTRIBUTE18',
'ATTRIBUTE19','ATTRIBUTE20','ATTRIBUTE21','ATTRIBUTE22',
'ATTRIBUTE23','ATTRIBUTE24','ATTRIBUTE25','ATTRIBUTE26',
'ATTRIBUTE27','ATTRIBUTE28','ATTRIBUTE29','ATTRIBUTE30');
dbms_output.put_line('Creating CONTEXT');
-- see webadi dev.guide for complete parameter documentation.
BNE_INTEGRATOR_UTILS.UPSERT_INTERFACE_COLUMN
(P_APPLICATION_ID => 140,
P_INTERFACE_CODE => interface_code,
P_SEQUENCE_NUM => 1011,
P_INTERFACE_COL_TYPE => 1, -- indicates that column exists
in interface table.
P_INTERFACE_COL_NAME => 'CONTEXT',
P_ENABLED_FLAG => 'Y',
P_REQUIRED_FLAG => 'N',
P_DISPLAY_FLAG => 'Y',
P_FIELD_SIZE => 30,
P_DEFAULT_TYPE => '', -- JAVA_EACH_ROW, SQL, TABLELOOKUP
etc.
P_DEFAULT_VALUE => '',
P_SEGMENT_NUMBER => '',
P_GROUP_NAME => 'MASSADD_DF',
P_OA_FLEX_CODE => 'FA_MASS_ADDITIONS',
P_OA_CONCAT_FLEX => 'N',
P_READ_ONLY_FLAG => 'N',
P_VAL_TYPE => 'DESCFLEXCONTEXT', -- TABLE,JAVA etc.
P_VAL_ID_COL => '', -- Column for table LOV.
P_VAL_MEAN_COL => '', -- Column for table LOV.
P_VAL_DESC_COL => '', -- Column for table LOV.
P_VAL_OBJ_NAME => '', -- Table for table LOV, class for java
P_VAL_ADDL_W_C => '', -- where clause for table LOV.
P_DATA_TYPE => 2, -- 1=NUMBER,2=varchar,3=date
P_NOT_NULL_FLAG => 'N', -- Y=not null, N=null
P_VAL_COMPONENT_APP_ID => '140', -- NUMBER
P_VAL_COMPONENT_CODE => 'OA_FLEX', -- VARCHAR2
P_SUMMARY_FLAG => 'N', -- VARCHAR2
P_MAPPING_ENABLED_FLAG => 'Y', -- VARCHAR2
P_PROMPT_LEFT => 'Context - Descriptive Flexfield', --
VARCHAR2
P_PROMPT_ABOVE => '', -- VARCHAR2
P_USER_HINT => '', -- VARCHAR2' List - Text','* List -
Text', '* Value','Text','* Date'
P_USER_HELP_TEXT => 'US', -- VARCHAR2
P_LANGUAGE => 'US', -- VARCHAR2
P_SOURCE_LANG => 'US', -- VARCHAR2
P_OA_FLEX_NUM => '', -- VARCHAR2
P_OA_FLEX_APPLICATION_ID => '140', -- NUMBER
P_DISPLAY_ORDER => 802, -- check
P_UPLOAD_PARAM_LIST_ITEM_NUM => '', -- NUMBER
P_EXPANDED_SQL_QUERY => '', -- VARCHAR2
P_LOV_TYPE => 'NONE', -- VARCHAR2
P_OFFLINE_LOV_ENABLED_FLAG => 'N', -- VARCHAR2
P_VARIABLE_DATA_TYPE_CLASS => '', -- VARCHAR2
P_USER_ID => 2 -- NUMBER VERIFY THAT 2 IS CORRCT
dbms_output.put_line('Creating MASSADD_DF_PARENT');
-- see webadi dev.guide for complete parameter documentation.
BNE_INTEGRATOR_UTILS.UPSERT_INTERFACE_COLUMN
(P_APPLICATION_ID => 140,
P_INTERFACE_CODE => interface_code,
P_SEQUENCE_NUM => 1012,
P_INTERFACE_COL_TYPE => 2, -- indicates that column exists
in interface table.
P_INTERFACE_COL_NAME => 'MASSADD_DF_PARENT',
P_ENABLED_FLAG => 'Y',
P_REQUIRED_FLAG => 'N',
P_DISPLAY_FLAG => 'Y',
P_FIELD_SIZE => '', --?
P_DEFAULT_TYPE => '', -- JAVA_EACH_ROW, SQL, TABLELOOKUP
etc.
P_DEFAULT_VALUE => '',
P_SEGMENT_NUMBER => '',
P_GROUP_NAME => 'MASSADD_DF',
P_OA_FLEX_CODE => 'FA_MASS_ADDITIONS',
P_OA_CONCAT_FLEX => 'Y',
P_READ_ONLY_FLAG => 'N',
P_VAL_TYPE => 'DESCFLEX', -- TABLE,JAVA etc.
P_VAL_ID_COL => '', -- Column for table LOV.
P_VAL_MEAN_COL => '', -- Column for table LOV.
P_VAL_DESC_COL => '', -- Column for table LOV.
P_VAL_OBJ_NAME => 'oracle.apps.bne.integrator.validators.
BneDFFValidator', -- Table for table LOV, class for java
P_VAL_ADDL_W_C => '', -- where clause for table LOV.
P_DATA_TYPE => '', -- 1=NUMBER,2=varchar,3=date ?
P_NOT_NULL_FLAG => 'N', -- Y=not null, N=null
P_VAL_COMPONENT_APP_ID => '140', -- NUMBER
P_VAL_COMPONENT_CODE => 'OA_FLEX', -- VARCHAR2
P_SUMMARY_FLAG => 'N', -- VARCHAR2
P_MAPPING_ENABLED_FLAG => 'Y', -- VARCHAR2
P_PROMPT_LEFT => 'Descriptive Flexfield', -- VARCHAR2
P_PROMPT_ABOVE => '', -- VARCHAR2
P_USER_HINT => '', -- VARCHAR2' List - Text','* List -
Text', '* Value','Text','* Date'
P_USER_HELP_TEXT => 'US', -- VARCHAR2
P_LANGUAGE => 'US', -- VARCHAR2
P_SOURCE_LANG => 'US', -- VARCHAR2
P_OA_FLEX_NUM => '', -- VARCHAR2
P_OA_FLEX_APPLICATION_ID => '140', -- NUMBER
P_DISPLAY_ORDER => 803, -- check
P_UPLOAD_PARAM_LIST_ITEM_NUM => '', -- NUMBER
P_EXPANDED_SQL_QUERY => '', -- VARCHAR2
P_LOV_TYPE => 'NONE', -- VARCHAR2
P_OFFLINE_LOV_ENABLED_FLAG => 'N', -- VARCHAR2
P_VARIABLE_DATA_TYPE_CLASS => '', -- VARCHAR2
P_USER_ID => 2 -- NUMBER VERIFY THAT 2 IS CORRCT
dbms_output.put_line('Creating OA_FLEX component');
end;
insert into bne_components_b
(application_id, component_code, object_version_number, component_java_class,
created_by, creation_date, last_updated_by, last_update_login, last
updatedate )
values
(140, 'OA_FLEX',1.0,'oracle.apps.bne.integrator.component.BneOAFlexComponent',
2,to_date('20051201','YYYYMMDD') ,2, 2, to_date('20051201','YYYYMMDD') );
Update bne_interface_cols_b
set last_update_date = to_date('20051201','yyyymmdd')
where application_id = 140
and interface_code = 'FA_MASS_ADD_INTERFACE'
and sequence_num in (1011, 1012);
Update bne_interface_cols_tl
set last_update_date = to_date('20051201','yyyymmdd')
where application_id = 140
and interface_code = 'FA_MASS_ADD_INTERFACE'
and sequence_num in (1011, 1012);
Reference
559392.1

Hello.
The process is described in the Oracle Web Applications Desktop Integrator Implementation and Administration Guide manual.
Octavio

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

How to add different columns in a single dashboard prompt?

Hi
I am new to this forum. I got a new requirement, my client is asking me to show multiple columns with multiple tables in a single dashboard prompt
for Ex: Column name Table name
1. Customer 1. Customer Details
2. Market 2. Region
3. Order 3. Order Status
4. Product 4. Product Type
He wants to show all these column names in a single prompt when user click on the particular column name it should appear on report. Is it Possible? if possible tell me how?

See this thread...
Re: How to add new columns by using Multiselect

How to add customize columns to update logic of vanilla etl code

Hi Experts,
How to add customize columns to update logic of vanilla etl code.
example we added a column and passes through custom expression and passed to target it worked fine for full load.
but when the code move to QA we found defect that some of the data is not loaded. we are unable to get the updated data for customize columns.(not incremental load using DAC)
In documnet it was mentioned to add to update logic port. can any one help us in this issue.
Thanks
Naresh

You now that you need to ask BI Apps related questions on this forum: Business Intelligence Applications because I see the same question here: How to add customize columns to update logic of vanilla etl code
This kind of cross-posting isn't correct forum behavior.
Regards,
Stijn

FBL5N : how to add a column of the Account's name?

Hi,
the list displayed by Tcode : FBL5N contain only the number of account, please how to add a column of Account's name ?
Please advise
Regards.

When you are in the FBL5N display results screen, use the menu option Settings --> Special Fields.
There are also the following notes which would explain you how to add special or new fields to the line items :
- 310886     Line items: Dynamic selections ignored
- 215798     FBL*N: Special fields are not displayed
- 373268     Line item: new display field
The special field has to exist in table T021S.

How to add two columns in OBIEE report?

Hi to All,
Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
Thanks in Advance,
Thenmozhi

Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
Let me know if you are looking for something else.
Thanks

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

How to add multiple columns?

Using designer API, how to add multiple columns to the repository tables? I want to add number of columns at a time instead of adding column by column.
Thanks in advance.

Can you use sqlplus?
ALTER TABLE table_name ADD (column_name data_type), (Column_name datatype),...
Check the SQL Reference 11-9.
Hope this helps.
Bill Swanson

How to add one column in existing search help.

Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
Shivam

Hi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM

How to add one column to the standard t.code : CAT2.

Hi,
How to add one column to the standard t.code : CAT2.
thanks

Hi Chinna
see the enhancements by using SMOD CATS0007 , or CATS0012 and create a project using CMOD and you can implement your requirement.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

How to add new columns in predefined matrix in system form

Hi all,
I am new to SAP B1. I am going to add New column to Good Receipt PO matrix. I faced the one error " Matrix Line Exists " While adding new column to good receipt PO matrix".
=========================================================
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
             oMat = oForm.Items.Item("38").Specific
               oCols = oMat.Columns
                oCol = oCols.Item("U_MyCol")
        If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD And pVal.BeforeAction = True And pVal.FormType = "143" Then
            Try
                oForm = SBO_Application.Forms.Item(pVal.FormUID)
                oMat = oForm.Items.Item("38").Specific
                oCols = oMat.Columns
                'oCol = oCols.Item("U_MyCol1")
   oCol = oCols.Add("U_MyCol1", SAPbouiCOM.BoFormItemTypes.it_EDIT)
                oCol.TitleObject.Caption = "Qty Accepted"
                oCol.Width = 40
                oCol.Editable = True
                oCol = oCols.Item("U_MyCol1")
            Catch ex As Exception
                SBO_Application.MessageBox(ex.Message)
            End Try
        End If
oDBDataSource = oForm.DataSources.DBDataSources.Add("PDN1")
        ''oEdit.DataBind.SetBound(True, "PDN1", "U_QtyAccepted")
============================================================
And i also added for Datasource to Databind. what there is no result ??i wanted Clear information regarding this to add new columns in matrix in middle of Matrix items. I wanted Clear coding& information for this to add new Columns in Matrix ?help me regarding this asap??
Regards
ANAND

Anand,
If you use the "search" feature of this forum and type "add column", you will find many posts that may help you such as this one ...
How to add a column on sales order matrix?
HTH,
Eddy

How to add Two Columns in SQL

How to add Two Columns in SQL
For Example
Jan Feb
215 NULL
How to add these two values in SQL

Anything + NULL is NULL.
Check this:
SQL> SELECT 1 + NULL from dual;
1+NULL
SQL> You have to do this:
SQL> with t as (SELECT 235 JAN, NULL FEB FROM dual)
2 SELECT NVL(JAN,0) + NVL(FEB,0) FROM t;
NVL(JAN,0)+NVL(FEB,0)
235
SQL>

How to add search help to custom infotype listbox??

Hi All,
How to add search help to custom infotype listbox??
Thanks in advance

Hi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju

How to add .js link in custom list form through sharepoint designer 2013

hi friends
so far i was adding jquery code to script editor webpart in custom list form.
but i need to know how to add .js link in custom list form through sharepoint designer 2013
please help me.

Hi,
We can add the "JS Link Property" in the “WebPart” node in the custom list form page through SharePoint designer 2013.
Here is an example for your reference:
<JSLink xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm">~site/Style Library/js/custom.js</JSLink>
Noticed that, we should not lose the 'xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm' attribute.
Best Regards
Dennis Guo
TechNet Community Support

How to add DFF columns in custom layouts?

Similar Messages

Maybe you are looking for