How to add disclaimer on smtp server and use it using utl_smtp.

We use utl_smtp to send emails. The requirement is to add a disclaimer on smtp server so that any outgoing emails sent using utl_smtp should have this disclaimer.
Is that possible and how do we acheive this?
--Thank you for any suggestions.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Hello Rahul,
the code would be something like this:
loop at itab1.
move-corresponding itab1 to itab2.
collect itab2.
endloop.
Hope this helps.
Regards,
Himanshu

Similar Messages

  • HT4519 after setting up a new account to my SMTP server and saving info how it goes to the account info and not to my mail. ta suzie

    After setting up a new account to my SMTP server and saving info how do I open it? When I touch on my new account bigpond.com it goes to the account info and not to my mail

    To read your emails you need to come out of Settings and go into the separate Mail app from on your homescreen :
    The Settings 'app' is for defining settings for various apps and for the iPad as a whole.

  • How do i change primary smtp server?

    How do I change my primary smtp server? I can delete all the old accounts I no longer use as email accounts, but the primary smtp server for the accounts I still use is still set as that for the old server. Not only is there nowhere to delete it, I can't even change it! There should at least be a button to take you to that page in the iOS6 settings somewhere easy to find, like IN the same place as where it is listed.
    Very annoying.

    What did not work? You could not add an additional SMTP server? It does not matter what the primary is listed as....turn it off. Then turn on the additional server you added.
    Better yet remove your .mac account and add it back as .me account.
    .Mac to MobileMe transition FAQ
    http://support.apple.com/kb/HT1932
    Message was edited by: iphone3Gguy

  • TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

    Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

    Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
    I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
    Thanks!

  • I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

    I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

    the smtp server is the property of the mail provider and running in their server room
    talk to them
    and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp

  • How does Mail decide which outgoing SMTP server to use?

    I have Mail setup with two accounts - one for home use and one for work.  Each has its own outgoing SMTP server.  My question: how does mail decide which outgoing server to use?  I don't want to mix work and home stuff.
    Specifically, what happens in these three scenarios?
    1) I compose a new mail.  Does it always use the first account's outgoing SMTP server or does Mail look at the recipient's domain and base its decision on that?
    2) I reply to a work email.  Is Mail smart enough to look at my domain or the sender's to know to use the work outgoing SMTP server?
    3) I reply to home email.  Is Mail smart enough to look at my domain or the sender's to know to use the home outgoing SMTP server?
    Any information is much appreciated.
    Tom

    Hi Juergen,
    Thanks for the suggestion - I had to "Customize" the viewable header to include the "From:" ("Von:") line to see who I was sending as.  As far as the "use this SMTP only" checkbox is concerned - they're checked on both my accounts - so I'm not sure how much of an impact that has.  To be honest, I thought this checkbox was meant to limit your outgoing mail (for that account) to this mail server only.  I thought that if it was not checked, Mail will try to send the mail via another SMTP server if the one for this account is not reachable.....after all, why else would Apple allow you to check both servers' "use this SMTP only" checkbox?
    But this is good enough for me - now I can see who i'ms ending as.
    Thanks,
    tom

  • How to add new currency in ORCO and ORBO

    Hi, I have successfully install ORCO, ORBO and ORPOS. I followed Implementation Guide, Volume 1 – Implementation Solutions to add new currency in ORPOS.
    But I still do not know how to add new currency in CO and BO.
    I try to use import parameter feature in ORCO and ORBO to import xml, the result said "Success" but there is no changes.
    Please help show how I could achieve this.

    I change the FL_CNY_BASE into 1 already. POS is OK now. But BO is not regconize that there is a new currency. I'm trying to go to
    Admin -> Job Manager -> Available Import -> Import BackOffice Parameters
    and try to import xml file that contain belowing content.
    <?xml version="1.0" encoding="UTF-8" ?>
    <CurrencyImport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CurrencyImport.xsd" Priority="0" FillType="FullIncremental" Version="1.0" Batch="1" CreationDate="2001-12-17T09:30:47.0Z" ExpirationDate="2027-12-17T09:30:47.0Z">
    <!-- Example of adding a Currency. -->
    <Currency ChangeType="ADD" ISOCode="MYR" IssuingCountryCode="MY" Name="MYR" IssuingCountryNationality="Malaysian" IsBaseCurrency="true" Scale="2" Priority="0" />
    <ExchangeRate ChangeType="ADD" CurrencyCode="MYR" MinimumAmount="0.00" EffectiveDate="2008-05-26" ExpirationDate="2050-06-02" ToBuyAmount="2" ToSellAmount="2" ServiceFeeAmount="0.00" />
    </CurrencyImport>
    The result said it success but I still cannot see any change.
    Is there is any other things I should make change at BO? Any property file that I should make change? BO and CO is web application so the structure of files are not the same as POS. I can't following the same thing when I had made with POS for BO and CO.
    Thanks for you helping

  • How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

    Hi everyone,
    I have a question ~
    Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
    I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
    But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
    I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
    How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

    What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
    For example when using WLST:
    # set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
    # start WLST by using: java weblogic.WLST
    # connect to the adminserver
    connect('adminusername','adminpassword');
    # change to the serverruntime environment
    serverRuntime();
    # show the attributes
    ls();
    # Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
    -r--   WeblogicVersion                              WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638
    # Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
    # change the directory
    cd('JVMRuntime/AdminServer');
    # show the attributes
    ls();
    -r--   Version                                      R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
    # when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

  • How to add my html title tag and html meta name and meta keywords

    how to add my html title tag and html meta name and meta keywords in iweb 09

    Like you will see on Roddy's page iWeb SEO Tool will do the job very easily:
    Click to view full size
    Click to view full size
    It remembers what tags went to which pages so they are easily reapplied when you have to republish.
    OT

  • How to add a new j2ee server to PI system?

    how to add a new j2ee server for our PI product system?
    Is it to execute 'install dialog instance ' steps?
    Thanks

    Hello
    I have moved this thread to the Netweaver Administrator forum (this is not a PI technical issue). You have a better chance of getting a quality answer to your query in the Netweaver Administrator forum.
    Take the notes below into consideration after you have added the java node.
    1) #734931   Using a J2EE cluster in the XI 3.0/7.0 environment
    2) #1079478  Using a J2EE Cluster in the PI 7.10 environment
    Can anyone assist with how to add a java node?
    Regards
    Mark Smyth
    XI/PI Moderator

  • How to add WebService authentication in pl/sql using UTL_HTTP

    Hi,
    I am passing SOAP request and getting output as a soap response from WebService using UTL_HTTP.
    Calling Web service client call from the PL/SQL procedure.
    Java web service is a service producer.
    Now we needs to add security to the application we are planing to add some of the userid/pwd credientials.
    So what needs to be add sql code in the sq/sql for making client call.
    i checked from the few of the articles. it shown like
    UTL_HTTP.set_authentication(http_req, 'username', 'password' );
    is it enough for making clent call or any other changes are required.
    Please let me know and any code to be implemented in the jave side aslo(if you knows) :-)
    Thanks,
    Pradeep.

    Okay, backtrack.
    A web server can deliver all kinds of content. From static HTML pages, to XML files and videos and dynamic content. Including reports.
    The communication language (protocol) used to talk to a web server is HTTP.
    UTL_HTTP is an Oracle PL/SQL library that implements the client side of this communication. It allows the developer to write code that acts like a web browser and communicates with a web server.
    Now what do you not understand and cannot use?
    HTTP is not simple and easy. You need to understand the basics of this communication language in order to communicate successfully with the web server. Like knowing the difference between GET and PUT and POST commands, how the URL query string works and so on.
    Once you know that, you can look at how the web server provides reports. How do you authenticate as a web browser with the web reporting system? What URLs do you use to access which reports? How do you pass name-values to the web server as report parameters? What HTTP response formats (MIME types) does the web report server provide? Which one do you plan to use and how do you parse that response into a meaning structured data format?
    If you're thinking it is "easy", think again. Sure, someone here can provide sample code that for example grabs a CSV report file from a web server and (using a pipeline table function), turn that into rows and columns. But that will not teach you the fundamentals you need to know and not equip you with dealing with the problem with your own brains, hands and keyboard.
    PS. In other words, learn to crawl and walk before trying to run. Get to grips with how HTTP works before diving into the deep end of web report integration.

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Does anyone know how to add a dateline in the website using muse?

    Does anyone know how to add a dateline in the website using muse?

    You cannot.
    You would have to add it to the mail server ( if you have an IMAP account), then it will appear on the ipad.

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

Maybe you are looking for