How to add extra audio to a multi cam sequence.

I have two tracks of video with audio attached. I also have 3 external audio tracks symced up to the videos.
When I create a new sequence and choose the same amout of audio tracks. Then I drop the files into this sequence ( nested). I get a choice of
audio up to five but when I choose one of the audio tracks without video attached. I don't get the single tracks audio.
Did I miss something here. Or I am I supposed to drop the external audio in after editing and sync up?
Any help would be great. I think I hit every tutorial there was with no answer.
david

Thanx Jim. I actually just cut and pasted the audio tracks from the original sequence and dropped this into the multitrack sequence after adding a few more audio tracks. Worked like a charm. : ) Have I said I love this forum and Adobe ppcs6 latley?

Similar Messages

How to stabilize parts of a multi-cam sequence ?

I want to stabilize parts of a multi-cam-sequence. So I right-klick the clip to send it to Aftereffects. But this will end up in sending the whole multi-clip (two povs, 30 minutes of length).
How can I extract parts of the multi-cam-sequence I want to have stabilized?

Have you cut the clip each side before sending it?
You could try making a subclip..... though I haven't tried it so I don't know for sure that would work - it's worth trying through.
An alternative is to render the part of the clip to a file, stabilize that then use the replace footage to replace the footage on the multicam sequence. This is more hassle, but at least you have an actual file that is stable rather than relying on dymanic linking (which has failed me a couple of times).

How to add an audio file to a link

I am working on a project using IWeb and I am trying to figure out if it is possible and then, if it is how to add an audio file to a link. I would really be glad of your help as I am having problems meeting the requirements of the project if I don't make it work.
Also, is it possible when having added a movie clip from quick time player to have the clip start as soon as the page is "opening", that is without pressing the play button?
I am waiting in great suspense to see if anybody can help me out. If you have the answers to my questions, please send me an email at [email protected] - thank you so much :o)

Hi Maiken
Welcome to the discussion forums.
All you need is open iWeb, select text or image, open inspector, go to link, check the "enable as a hyperlink" box, in "link to" there's a teardown menu where you select "a file" and select the file you want to link to.
If you want to have it downloading look at [this|http://alyeska.altervista.org/en/iWeb_Downloads.html]
For the second question:
select the movie file in iWeb go to inspector, then to the last icon (showing the quicktime logo) and check the box that say "Autoplay".
Regards,
Cédric

HT1752 I am working on a chart in paged with 7 columns. Problem has occurred with amount of row. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

I am working on a chart in pages with 7 columns.
Problem has occurred with amount of rows. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

Try posting in the Pages forum
https://discussions.apple.com/community/iwork/pages

How to add extra options for style of images. iPad version has far more options than Mac version

How to add extra options for style of images in pages. iPad version has far more options than Mac version

Thank you, you made me go look again and I realised the ones I use on the iPad are under Borders not style and they are on Mac also. I feel a bit silly but I wouldn't have got there without your prompting. Do you mean by "create your own" using the borders and then saving as a style or can you create something that is not in either?
Thanks again

How to add extra labels into Bridge CS5?

Hi folks, nice to meet you all.
I do not want to edit or rename the existing 5 existing labels into Bridge CS5. I just want to create new labels. So, I want to add extra labels to have more than 5 labels.
Does anybody know how to add extra labels into Bridge CS5? If so, please, tell me how to do it.
Thanks.

You should move this post to the new Bridge forum as this one will soon die. Here is link http://forums.adobe.com/community/bridge/general

Multi cam sequence - how to take audio from multiple tracks?

I have a multi cam sequence with multiple audio sources (cameras plus separate audio tracks).
According to this page, in order to have multiple audio sources, I need to mix them into a track in the source sequence:
http://help.adobe.com/en_US/PremierePro/4.0/WSADF1BC06-B8FB-4f23-8446-8D8F8539D7BD.html
So I mixed several tracks into submix 1. But when I use the multi cam monitor, submix 1 is not available as an audio source.
Is it perhaps possible to mix audio into a non submix track? If so, how?
premiere cs4

Multicam can only use audio 1, or audio follows video (you hear whichever track you see). There's no way to hear more than one track at a time.

How to add extra tab in bapi at item level

hi developer,
please guide me in solving this problem i.e how to add extra tab in bapi at item level .
thanks .
ravi

What are you exactly asking for, I don't understand your question...
Transaction screen, adding a tab / customer fields
Business Object / BAPI, modifying BAPI signature, extension
NB : The quality of an answer depends significantly on the quality of the question ...
Regards,
Raymond

Work flow? How to link multi-cam sequences for DVD output?

Pr cs4 (very new)
Still taking baby steps each day... please take my hand and help me!
Final output will be 2 DVD's (each DL) each about 2 hrs. Content are chamber music student groups in two recitals.
I have assets from two camera angles. I have successfully practiced on one of the groups performance (10 min.) following the steps illustrated in a multi-cam tutorial. http://www.adobe.com/designcenter/video_workshop/?id=vid0234
This leaves me with a great multi-cam sequence for that group located in the Project Panel, exactly what I want.
Now, I want to know what is the best method (workflow?) to ultimately produce a DVD containing about 10 of these type performances (one after the other) with chapter markings for each group, titles etc.?
I have yet to use Encore and I'm guessing that is where I'll send the finished edit for DVD production, though I don't know at what step I jump there?
Do I try to create one very long multi cam sequence of all the content, then send to Encore? Or can I create seperate multi-cam sequences (each performance) then link them together, adding transitions and make the DVD? This would be my preference to keep things more manageable, especially with audio synching.
With my practice multi-cam sequence on the timeline, I tried to drag the same sequence from the Project Panel to the end of the timeline to simulate how this would work, but it does not add to the timeline as a clip would.
This is probably childs play for you pro's, but we were all baby's at one time...I just happen to still be one!
Thanks for your patience and advice,
Kenny

Yes I did...now toss me a cookie please.
I am trying to quickly get up to speed in Pr CS4 to get this project completed. In the process, I'm trying to learn and understand the interface and correct terminology so as to make my questions intelligible to a community that posses vastly greater understanding than myself.
Is there anyone who can help with my main question at hand? Namely, how to go about creating a full length sequence (in the timeline) made via the nesting of synchronized multi-camera clips within a new "multi-cam sequence"?
As I said, I have completed a small test sequence in this fashion, nesting clips in a new sequence then using multi-cam monitor to record cuts. Now I need to add about 10 more of these together in a completed sequence to then send to DVD production.
Is this intelligible?
Thanks, Kenny
__0
_ \<,_
Date: Wed, 4 Nov 2009 09:11:06 -0700
From: [email protected]
To: [email protected]
Subject: Work flow? How to link multi-cam sequences for DVD output?
please take my hand and help me!
Well, at least you had the gumption to admit that up front.
>

Audio targeting in Multi Camera edits Premiere 5.5

I am editing 6 days worth of a 3 camera multi camera set up from a seminar I shot last month. I am using Premiere Pro 5.5.
I shot the class with the speaker mic'ed with 2 wireless lapel mics: one mic going into Cam 3 left channel, and one going into Cam 2 right channel; the open channel on both catching ambient audio via camera mics. The thought here was I would have some redundancy in the event one mic popped out due to battery issues, or interference, and still have an audio channel to sync to with PluralEyes.
Camera 1 was a wide shot of the front of room, and had 4 choir mics directed at the audience (to pick up questions and such) and one shotgun focusing on the front where the speaker stood (again, for redundancy) running into a mixer, and then into Cam 1 right and left channels.
In Premiere, I line up all the video shots with PluralEyes (or manually) and then nest that sequence into a new multi cam sequence and begin editing.
When nesting the video and audio into a new sequence and turning multicamera editing on, I get the one track of nested video, and the one track of audio.
My issue is how to get the cleaner audio of the instructor, which is on either CAM 2 or 3 (with the lapel mics), onto the track of CAM 1, which is the only track I am able to hear when doing multi cam edits. If I simply copy the instructor audio onto track 1 in the 'source' sequence, I lose the audience replies and sound. But I don't know how to mix other channels onto the main track of the parent sequence (source).
I have worked around this by copying the audio from track 2 or 3 onto track 1 in the original (not nested) sequence and that has worked and I could keep on editing. But now, I need to do a group discussion portion, and need the audio from track 1 as well as the others and I am not sure how to mix them into the main audio track that the multicam process requires.
I hope I am clear in my explanation. In essence, how do you get a mix of tracks to show up onto track 1, the only audio track that seems to be able to be read by the multicam feature in Premiere 5.5?
Many thanks!!
Mark

Since I didn't want to ask a stupid question, I have been trying to do what
you suggested below, but I am not meeting with success (which means I am
doing it wrong :o)
I have made my edits in the multi Camera sequence I created and used the
Multi Cam "enabled" setting (labeled this sequence "Multi"), and then
placed the original multiple camera and tracks sequence (labeled
'source' which was first lined up and synced) into the video 2 track in the
multi cam sequence.
So now I have 2 tracks of the original "Source" sequence in the "multi"
sequence: one cut into shots and one uncut from the original sequence.
But, only the audio is coming in from the first track, even though the
tracks are all activated in the original sequence (nothing muted).
I know I am close, but not sure what I am doing wrong, and the audio from
the tracks is important for the final product.
Thanks again!

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

Using Audio Sync for Multi-Cam Edits Premiere Pro CC

Hello everyone - I wanted to share some issues I've come across while using Audio to sync multiple camera angles....
For my music video shoot I have two cameras and an external recorder where I capture the audio and then edit in GarageBand or Adobe Audition. The problem I've discovered is that when I sync the clips using audio it will degrade the quality of my finalized audio clip.
Basically, something is happening to the audio clip quality once Premiere completed the synchronization process. I've rendered the video, exported the video etc... But there is still audio quality degradation.
I've compared this with Final Cut Pro X and the Audio in FCP X remains unchanged and is not altered in any way.
Has anyone else experienced this issue?

Update: I just happened happened to have a pair of ath m50s lying around.... put them on and I can see that in the multi cam sequence, I can hear only out of the left ear... once I drag and drop something to my timeline the audio's good again...
Sorry for this question... operator???
I shoot tech videos on YouTube and I edit my own videos, so I guess I am the operator & observer here...
Am shooting a tutorial...
Cam 1 - My Camcorder that shoots the phone
Cam 2 - Actually a screen recorder that records the steps on screen & audio from webcam
Audio - Blue Spark Digital recording to audacity
Now if I merge Cam 1 & Audio or Cam 2 & Audio alls fine... I can check the audio meters and everythings the same as before
But if I create a multicamera sequence then the audio output is about 20% lower (and no Premiere's not using the audio source from Cam1 or 2 here since they are too low and am 100% sure its not either of those)
I guess am messing up something but am unable to identify what..
Syncronize Point - Audio
Track Channel - 1
Sequence Preset - Automatic
Audio Sequence Settings - Camera 1
Audio Channels Preset - Automatic (or Mono since my Blue Spark records in mono)
Camera Names - Enumerate Cameras
Any Idea where am messing up?
Ash
Message was edited by: C4ETech

Multi Camera sequence went black (mostly)

So, I edited three separate multi camera sequences... They all looked great and I exported them through media encoder. When I went to look at my files one of the three had a really small file size and I noticed it was all black.
I went back into premeir pro cc and sure enough that multi cam seqence was all black as well (except about 3 seconds of footage right in the middle from two different cameras). Now when I go back to the original sequence (not the nested multi cam) It is just fine so I know the clips are still linked into PP. Also, I can make a new multi cam sequence from the original and it is just fine as well.
I think PP just F'd up... and unless someone can tell me how to go back in the file save history or something I'm sunk because premier auto saved when I last closed it. I'm seriously at a loss as to why this happened as it was just fine when I went to export it... or at least nearly immediately before. Why is there 3 seconds of footage in the middle of all black 47min sequence? and that 3 seconds is from inside of a 10 minute clip on the original un nested sequence so It's not as if just one video file was showing up.
Okay, so more than figuring out what happened I want to move on with my life. Is there anyway to copy the edit points onto a brand new multi cam sequence? Does anyone have any ideas what happened that I can undo?
Thanks,
Okay, so this is weird.... so, the original un nested sequence was 1:30 hours with 45 minutes of unused audio at the beginning. When I made my nested sequence for multi cam editing I selected the last 45 minutes and nested that. Everything functioned just fine, but somehow during export it took my multi cam sequence and added back in the 45 minutes of blank audio....so when I extended the multi cam sequence to 1:30 there was all my video... but my edits were all done on top of the audio. Seriously Stupid, and definitely a bug!!!
Is there any sort of file save history that I can revert to?

I accidentally found the auto-save folder which had 50+ versions of my project saved (thanks to no one, including Mark for pointing out that Premier Pro made new files each time it auto saved) And the issue is present in all of them, even back to a time when I am 100% positive I was working on the sequence inside of premier and it was displaying correctly.
So, that means that premier was not saving my file correctly, even though it was displaying correctly inside the program at that time. Then, when media encoder opened it for export the nested sequence was out of sync from the original, and today when I reopened it in premier it showed everything out of sync.
I'm using premier CC as a trial because I was considering upgrading from cs5 for the clip sync and increased features. Clip sync didn't work for my files so I had to use pluraleyes anyways and this bug I experienced today means that I lost 4hrs of work and 2 more hrs trying to figure out if I could recover my 4hrs of lost work. Now, I have to re-edit and I'll definitely be doing it in CS5

Adobe Premiere Pro Help | Editing multi‑camera sequences (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-multi-camera-sequences1.html

According to the tutorial at http://www.video2brain.com/en/videos-13067.htm audio now defaults not to Track 1 of the source sequence as it used to, but to the video first selected when choosing between the multiple cameras.
I understand TimB was wishing to mix audio in the audio mixer in the source sequences and apply that to the multicam sequence without export audio and re-importing.
According to my notes to self in June 2012 when I used CS6 to do a multicam project, I wrote:
“To enable audio for all cameras, right click on the Source Sequence and ‘Open in Timeline’
Enable all the audio tracks you want.”
And that was all.
However the PremPro instructions for CS6 says:
Enabling audio in the multi-camera source sequence
By default, Premiere Pro only enables audio channel one in the multi-camera source sequence. For multi-camera editing workflow, enable each audio track manually before editing the target sequence. To enable audio tracks for the multi-camera source sequence, do the following:
1. Open the multi-camera source sequence by selecting the multi-camera source sequence icon in the Project panel, right-click
(Win) or Ctrl-click (Mac OS) the icon, and then choose Open In Timeline.
2. The Timeline opens. Select the audio tracks, and then enable the other audio tracks by clicking the Toggle Track Output
button for each audio track.
3. Now that all audio tracks are enabled, you can close the sequence
This is how I remember it but it doesn’t gel with TimB’s post. There are two sections in the Help pdf, one for CS5.5 (and I think CS5) and a separate one for CS6 as quoted above.

Issues with creating multi camera sequences

I'm using Premiere Pro CC 2014.2 and I’ve just started experimenting with multi camera sequences and have two problems, one I can work around, the other I can’t.
First, if I take a series of video clips, add a marker to each clip to identify the sync point, name the marker, and subsequently create a multi camera source sequence, the option to use the marker as the sync point is disabled. If I leave the markers blank and don’t name them, it works. Is this a bug or intended behaviour of the application?
Second, and more problematic for me; if I create a multi camera source sequence using two or more video clips, all of which have a stereo soundtrack except for one clip, and that single clip has a 5.1 soundtrack, I cannot seem to force the sequence to use the audio from only one of the clips with a stereo soundtrack. Basically I want the audio to always originate from the first clip (camera 1) during the clip selection process. I’ve selected the clips in the right order and ensured all other settings are correct, but the 5.1 clip always take precedence.
If all the video clips contain the same format of audio (in my case all stereo or all 5.1), I can select which clip becomes the default no problem, it’s only when a 5.1 clip is included in the source clips when all the others are stereo. Is there a way to select the 5.1 clip and make it the (camera 1) audio source?
Thanks in advance,
Steve

I'm guessing the marker thing is by design.
For the audio, once the sequence is created, just Mute all the stereo tracks.

How to add extra audio to a multi cam sequence.

Similar Messages

Maybe you are looking for