How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

Similar Messages

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

How to add a msata on hp envy 4 sleekbook and how to make it bootable.........?

I want to add a masta to my envy 4 sleekbook and want to make it bootable. Plz help me and give me some Msata ssd link which having great performance and one more question BIOS of my notebook doesn't having AICH options. Does it necessary for adding and making bootable msata ssd......?
BIOS Version F23

Here is the Service manual:
Manual
It does have an easily accessible mSATA mSSD port. See page 39. But the system will not boot from the drive unless you remove the full-sized SATA drive. You can work around that by putting a bootloader on the main drive which points to the mSATA to finish booting but that is hard to do.

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add accessibility to already built application

Hi,
Can any one help me how to add accessability to already built application. jdev version which am using is 11.1.1.4.
Thanks in advance.
Regards,
lavanya.

Hi,
its mostly a configuration in ADF Faces
http://docs.oracle.com/cd/E23549_01/web.1111/b31973/af_access.htm
Frank
Ps.: One of the beauties of using ADF Faces instead of hand-crafted web site in which case you would have been screwed

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T

hi frnds.
currently iam working on SD MODULE I NEED the NET DUE DATE SO HOW TO DO THAT
1 problem plz:
HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T
TOGETHER
one is date & other is numeric value so how?
one is date & other is numeric value so how to add this 2 fields
& finally i want to display the o/p in date format dd/mm/year
THANKS IN ADVANCE.

Hi Mahesh,
one of the nice features of ABAP is that it takes care about month/year changes when adding days/month on a date.
ADD lv_zbd1t TO lv_zfbdt.
This should work fine. If not, try to convert zbd1t into an integer first.
To get you preferred date output format try this:
DATA: lv_datestring TYPE string.
CONCATENATE lv_zfbdt+6(2) '/' lv_zfbdt+4(2) '/' lv_zfbdt(4)
INTO lv_datestring.
This isn't tested, but should give you a clue.
Regards,
ok

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

Hi,How to add field to sap Liquidity calculation module tables?

Hi Experts,
How to add field to sap Liquidity calculation module tables?
and how to add a field to a particular transaction code using a customer exits.
please tell me in detail.
thanks inadvance,
Regards,
Rekha

Hi Pranab,
Please follow the below steps to create an extra field and write code for that field through Infoset.
1-->Change in Infoset
u2022Go to SQ02 , enter Infoset name and click on Change Button
u2022Go to Extras (F5) button displayed on application bar.
u2022In Extras tab, click on 'Create' icon to create additional field E_NAME1, give as type C (character) and give desired length and. Enter header description as 'ShipToName'
u2022Select this field i.e E_NAME1 in one of the field group of Infoset.
u2022Go to Code section (Shift+F8) of infoset, Select Record Processing Event and write your logic code (condition) in this code section:
if vbpa-adrnr = space.
E_NAME1 = kna1-name1.
else.
E_NAME1 = adrc-name1.
endif.
2-->Generate the Infoset.
3-->Change in Query
u2022Go to SQ01(in a new session), give your query name (by selecting your user group) and click on change button.
u2022Check the field group in which you have added E_NAME1 field, then check E_NAME1 from Fields screen
u2022Click on 'Basic List' button; give line (row no.) and sequence (column no.) for extra fields.
u2022Execute/Test the Query, you will get desired result.
Please let me know, if you need more information.
Regards,
Dinesh
Edited by: Dinesh Tiwari on Oct 29, 2009 7:13 AM

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

How many key fields can we have in a DSO?

Hi,
how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
Thanks in advance,
Praveen

Hi,
Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
Thanks&Regards
Praveen

How to add a checkbox to dynamic itab so that i can select some records

How to add a checkbox to dynamic itab so that i can select some records in the alv and can display them in another alv using a button
I have requirement where i have to display the dynamic itab records in an alv ....Some records from this alv output has to be selected through checkbox provided in the first column .( I will get to know the structure of the itab only at runtime ,so iam using dynamic itab)

Hi,
   I tried and finally i got it , Just try for it.
type-pools : slis.
PARAMETERS : p_tab type dd02l-tabname.
data : ref_tabletype type REF TO cl_abap_tabledescr,
       ref_rowtype TYPE REF TO cl_abap_structdescr.
field-symbols : <lt_table> type   standard TABLE ,
       <fwa> type any,
       <field> type abap_compdescr.
data : lt_fcat type lvc_t_fcat,
       ls_fcat type lvc_s_fcat,
       lt_fldcat type SLIS_T_FIELDCAT_ALV,
       ls_fldcat like line of lt_fldcat.
data : ref_data type REF TO data,
        ref_wa type ref to data.
ref_rowtype ?= cl_abap_typedescr=>DESCRIBE_BY_name( p_name = p_tab ).
TRY.
CALL METHOD cl_abap_tabledescr=>create
EXPORTING
    p_line_type = ref_rowtype
receiving
    p_result     = ref_tabletype.
CATCH cx_sy_table_creation .
write : / 'Object Not Found'.
ENDTRY.
*creating object.
create data ref_data type handle ref_tabletype.
create data ref_wa type handle ref_rowtype.
*value assignment.
ASSIGN ref_data->* to <lt_table>.
assign ref_wa->* to <fwa>.
loop at ref_rowtype->components ASSIGNING <field>.
ls_fcat-fieldname = <field>-name.
ls_fcat-ref_table = p_tab.
append ls_fcat to lt_fcat.
if lt_fldcat[] is INITIAL.
    ls_fldcat-fieldname = 'CHECKBOX'.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
    ls_fldcat-seltext_m = 'Checkbox'.
    append ls_fldcat to lt_fldcat.
endif.
clear ls_fldcat.
ls_fldcat-fieldname = <field>-name.
ls_fldcat-ref_tabname = p_tab.
append ls_fldcat to lt_fldcat.
endloop.
loop at lt_fldcat into ls_fldcat.
if sy-tabix = 1.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
modify lt_fldcat FROM ls_fldcat
    TRANSPORTING checkbox edit.
endif.
endloop.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = lt_fcat[]
IMPORTING
    ep_table                  = ref_data.
assign ref_data->* to <lt_table>.
select * FROM (p_tab) into table <lt_table>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   IT_FIELDCAT                       = lt_fldcat[]
TABLES
    t_outtab                          = <lt_table>.
Thanks & Regards,
Raghunadh .K

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

How can I found out the No. of Psocess running and How can I Release them

Dear experts,
How can I found out the No. of Psocess running and How can I Release them.
I have 1GB RAM with oracle 10G. and please tell me How many processes can run with this RAM.

>How can I found out the No. of Psocess running
well, that depends on where you are ? if you are on windows then task manager will tell you what all processes are running. if you are on unix then ps -ef will tell you about all the processes running on a particular machine
How can I Release them.
what do you exactly mean by Release ? if you mean "end" that again has 2 scenarios, first that process ends by itself (ie after completing its job), another can be killing the process , that again will depend upon operating system. in windows you can kill a process from task manager itself, in unix you can use kill -9 PID to kill a process.
How many processes can run with this RAM.
loads of other details required before one can answer this question.no of processes in a very simple manner will depend how much memory is available and how much a process is eating.
Sidhu

How to add fields to already loaded cube or dso and how to fill records in

Similar Messages

Maybe you are looking for