How to add/invite users to your admin console

I have read the FAQ regarding this but there is no option to invite users under the 'Admin Users' section as it states in the FAQ. I have WebBasics plan but it states I am allowed to have up to 3 users yet there is no way for me to invite these users. Also if I can not add any users is it possible to change my email for this account as I actually made the website for a client.

Hi,
The option should be located within the admin panel via Site settings -> admin users -> invite. 
If you are not seeing this please provide the site so we can investigate. 
Kind regards,
-Sidney

Similar Messages

  • Can't add new users in Server Admin console in Server 10.1.4.

    I've run into an issue with an older OS X Server 10.1.4 running on a G4 platform. It functions as a shared file repository and I need to add new users. However, it would appear that I've developed a problem.
    When trying to add new users I get the following error:
    An error occurred in the Users & Groups module in entry point "RACMMenuItemSelected".
    A program error has occurred.
    1004
    Now, my best guess is it's a corruption somewhere. But, I don't want to go poking around the production server taking it down and up until I've got some idea where I'm going. Any suggestions on where my troubles might be? Or has anyone had this issue before, and how was it corrected? (Hopefully not by a full software reload.)
    I'd like to replace/upgrade this server, but until there's money in the budget, that's just a dream, I need to try to figure out how to fix what's here.
    Help, please?
    PowerBook G4 17   Mac OS X (10.3.9)   1.5G RAM

    No answer was found for this issue. I've finally removed the server from production and will likely reformat and reinstall for use in other production areas. Hopefully we'll be upgrading the OS at the same time.

  • How to add a user to an existing group????

    Can't seem to find how to add a user to an existing group (staff). I am trying to share data (rw) between my admin account (root) and a development user. On any other UNIX system I would just add the user name in the /etc/group file & logout/login in. It don't work here!
    Suggestions??
    thanx
    mt

    OS X doesn't use /etc/groups. This file is present but does nothing AFAIK.
    Leopard uses directory services to handle groups and users.
    membership in groups with GID>500 can be handled from GUI in system preferences->accounts. other groups can be handled from terminal with dscl (directory services command line). do man dscl for details.
    to add a user to a group you'd do
    sudo dscl . append /groups/groupname GroupMembership username
    However, there should be no need to do it with "staff". every user with an account on your computer is a member of staff by default.

  • How to add multiple users to a role in ECC 6.0

    How to add multiple users (say 1000) to a role in ECC 6.0?

    Hi
    You can actually add multiple users to a role using transaction SU01. From SU01, use the menu Environment->Mass Changes.
    Here you can manually add the users, select them by address or authorisation data. Once you have your user list, you can then add or remove roles and/or profiles.
    Secondly , You can use SU10 to do mass changes to multiple users including role assignments per logical systems
    Also check the following link:
    http://www.sap-img.com/bc021.htm
    I hope this should do it
    regards
    Chen

  • How to add a user to the wheel group?

    How to add a user to the wheel group in leopard?

    In Leopard, users can be added to system groups using 'dscl'. For example, while logged into an "admin" account, the command below can be entered using "/Applications" > "Utilities" > "Terminal.app" to add a user "username" to the "wheel" group:<pre>
    sudo /usr/bin/dscl . -append /groups/wheel GroupMembership username</pre>
    If you prefer a GUI, "Workgroup Manager.app", included with the Leopard version of the "Server Admin Tools" can be used.
    http://www.apple.com/support/downloads/serveradmintools105.html

  • How to add a User Defined Field in OUBI

    Dear Experts
    I would like to find out how to add a user defined field into OUBI from a Customer Care & Billing source system. If anyone could list the steps involved or point me toward a source of documentation that sets out the steps involved it would be much appreciated.
    Cheers
    Tim

    Is there anyone out there who has had experience using OUBI with CC&B?

  • How to Add a user defined field in transaction-PKMC?

    Could anyone tell me the step by step process of how to add a user defined field in transaction-PKMC?
    Moderator message: please do some research before posting.
    Edited by: Thomas Zloch on Jan 16, 2012

    Is there anyone out there who has had experience using OUBI with CC&B?

  • How to add a user defined HTTP header field?

    Hi, everyone!
    I want to add a user defined HTTP header field to a HTTP
    response header.
    I use the following statements in testHeader.jsp
    response.addHeader("myheader", "123");
    response.sendRedirect("middleHeader.jsp");
    in middleHeader.jsp,
    out.print(request.getHeader("myheader"));
    But the output in middleHeader.jsp is null!
    How to add a user defined HTTP header field to a HTTP
    response header? Are there some sample codes?
    Cheers,
    George

    the send redirect actually creates a new request (through the client) and thus a new response
    thus the headers you set in the response are gone for the next request/response
    You can try servletDispatcher.forward

  • Regarding : How to add a user to portal group with the help of webdynpro .

    Hii ,
    I am working on an application in which with the help of an action( Button)  we r adding a user in Ztable in R/3 , as well as  group in portal.
    The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
    I need coding solution for " How to add a user to portal group with help of webdynpro"
    Any usefull link will also do.
    Pls anyone have any solution ??
    Thnks in advance.
    Rewards r waiting for u .

    Hi,
    Use UME api to add user to portal group.
    Using UME API:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
    Regards,
    Naga

  • How to add iphone user agent in safari browser running on windows xp

    How to add new user agent (iphone user agent) to safari browser(version 3) which is running on windows xp os .
    thanks in advance

    UPDATE:  We were able to further identify the root cause of the problem to be when anonymous access is turned off and the subweb is set up to use basic and integrated authentication (IIS settings).  To test this, we removed integrated authentication (leaving only basic authentication in place) and the problem was fixed.  However, this is not a viable solution as we need to use integrated authentication (for various other reasons).

  • How to add print server in server manager console

    Hello,
    I want to know how can I add print server in server manger console (not print management console)? I want to add another print server in server manager. I can add it by print management, but dont know how to add it in server manager. In server manager there
    is only local server in Print Services.

    Hi Amin2234,
    As far as I know you can There are two primary tools that you can use to administer a Windows print server:
    •Server Manager
    •Print Management
    Print Management provides a single interface that administrators can use to efficiently administer multiple printers and print servers and is the primary focus of this document.
    Print Management provides a central administration point for sharing printers on a network and managing print server and network printer tasks.
    The related KB:
    Print Management
    http://technet.microsoft.com/en-us/library/cc766474.aspx
    Add or Remove Print Servers
    http://technet.microsoft.com/en-us/library/cc755141.aspx
    Overview of Print Management
    http://technet.microsoft.com/en-us/library/cc731857.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    Hello,
    Thanks for your answer, but I asked how to add print server in "Server Manager" consol, not by print management.
    My server manager has currently 1 print server added, while I have 2 print server added in print management. I want to add the second print server in server manager console too.

  • Error occured while searching for users in OIM admin console.

    Hi Experts,
    I deployed code from dev environment in to Test environment using deployment manager in OIM and also completed metadata import using weblogic metadataimport utility.Then when itried to search for users in OIM admin console. I am getting the following error.
    Error messager:
    ADFC-10001: cannot instantiate class 'oracle.iam.identitytaskflow.backing.taskflows.modifyuser.ModifyUserView'
    ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #12
    Did any body faced this issue?
    Can u please suggest me on this?
    Thanks,
    Sri.

    I've faced same error !!

  • Creating users via the admin console

    Hi,
    I'm trying to create a user via the admin console. The user will have to
    authenticate via Membership, and will require a username and password.
    However, when creating the user via the admin console it does not allow you
    to specify a default password (or by using the command line 'ipsadmin create
    user /domain/user.xml', unless there is some XML field specified in the file
    to do that? If so, what is it? Specify an attribute in the
    "iwtAuthMembership-password"?) After creating a user via the console, I
    tried logging in using a blank password and a password the same as the
    username, but neither worked. Is this password set as default to something,
    and if so to what?
    Also, is there some existing means for a user who has already created a
    membership account to change their password? If not, then I guess I will
    have to develop some code to modify the "iwtAuthMembership-password"
    attribute.
    Thanks,
    Mark

    Hi,
    After you have created the user via the console, then the user will be added to a particular role.From the console go that particular domain and then to the role under which the user was created.Then select the Users link you can see the users list.From that list select the user for whom a password is needed,then it will lead you to a screen where you can see a link named Authentication.Expand that link and click on the Membership link there you can enter the username and password for the user

  • How to add BPC users in the batch?

    I would like to add BPC users in the batch.
    Does anyone know how to achieve this on BPC 7.0 MS?
    I think it is almost impossible to add thousand of BPC users without errors via BPC Admin Console.

    Hi,
    The solution proposed by Sakthi will work if you want to give to all this account the same level of security.
    Once you're in the "Add User", the AD filter will show all accounts. Just select all of them and choose team / task profile .. etc in next screens.
    Maybe you could create seperate domain group like BPC Admins, BPC Users.. and so on. And create customized filter for each of them. So when you add your users, just select the right AD filter and give to them the right set of security parameters.
    Edited by: Sebastien Michel on Jun 19, 2009 3:01 PM

  • How to add new user status in Solman

    Hello,
    I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
    I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
    Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
    Regards,
    Bhavesh

    Hi Abhyankar,
    Explain the scenario where you want to create a new user status?
    General remark:
    Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
    If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
    Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
    If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
    1. Create Authorization key for the new status
    2. Create the new status with status number and order of visibility; assign the authorization key to the status
    3. Create the action which will set the status
    4. Add the action in the action profile
    5. Write the schedule condition required
    These steps are on a high level. Hope this helps you to decide.
    Regards,
    Sameer

Maybe you are looking for