How to add new user status in Solman

Hello,
I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
Regards,
Bhavesh

Hi Abhyankar,
Explain the scenario where you want to create a new user status?
General remark:
Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
1. Create Authorization key for the new status
2. Create the new status with status number and order of visibility; assign the authorization key to the status
3. Create the action which will set the status
4. Add the action in the action profile
5. Write the schedule condition required
These steps are on a high level. Hope this helps you to decide.
Regards,
Sameer

Similar Messages

  • CHARM how to add new user status to change document

    Can someone please suggest how to add a new user status to a change document ?
    I am looking into adding status "Pending" to Admin correction SDAD.
    Thank you in advance
    Elena

    Hello,
    Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
    SAP Solution Manager
    -> Scenario-Specific Settings
      -> Change Request Management
       -> Extended Configuration
        -> Change Request Management
         -> Change Transaction
          -> Change Transaction Types
            o Define Status Attributes
    Also activity "Make Settings for Change Transaction Types" in the same path is important.
    Best regards,
    Miguel Ariñ

  • How to add Product User Statuses?

    hi all,
    I need to add new user status values in the Sales Status list for the Products object.
    The standard only has 2 statuses : blocked with error, blocked with warning. (see field Status in the Sales data tab of the Commpr01 transaction in CRM gui)
    I tried to play with the status management entry of the SPRO (CRM/master data/Products/Status management) : i created a status profile, assigned it to the Master data object. But, the values do not appear in the list.
    Since, our CRM is connected to an ECC system, and the products are actually replicated from ECC, I also tried to change the values in ECC thanks to the menu Logistics general/Material master/settings for key fields/data relevant for S&D/Define sale statuses : i added a few statutes, then relicated the table TVMS to CRM. I can then see that the values have been replicated to the CRM table (CRMC_TVMS). But, i still cannot the values in the drop down list box of the sales status in the Product master.
    Any idea anyon?
    thx
    Lud

    hello lud ,
    The status profile can only be viewed in new UI not in SAPGUI.
    Please perform the following steps
    1. Go to transaction BSP_WD_CMPWB
    2. open the component PRDHS
    3. Go to the view PRDHS/Header
    4. In the configuration add the field 'Status Profile' to the view.
    Now test the again.This should solve the issue.
    Also ensure that the sap note : 1249450 is implemented in the system .
    Thanks & regards,
    krishnen Subramanian.

  • How to add new users to BPM 11g

    In BPM 10g, I can add new users and roles in administrator console. How to login to BPM 11g administrator console and add new users?

    While creating Human Task did you selected "Initiator" in the Pattern?
    Login as administartor(weblogic) go to Administration the you will find all the processes and corresponding roles. There you can add/modify the users to the processes.
    Let me know if you have any questions.
    Thanks
    MC

  • How to add iphone user agent in safari browser running on windows xp

    How to add new user agent (iphone user agent) to safari browser(version 3) which is running on windows xp os .
    thanks in advance

    UPDATE:  We were able to further identify the root cause of the problem to be when anonymous access is turned off and the subweb is set up to use basic and integrated authentication (IIS settings).  To test this, we removed integrated authentication (leaving only basic authentication in place) and the problem was fixed.  However, this is not a viable solution as we need to use integrated authentication (for various other reasons).

  • Add new User Awareness Status Messages(Collboration)... :)

    Hello All,
    I want to add new user availability status messages (which are related to Awareness Status Selector in Collaboration).
    When an user enables the Collaboration Launch Pad, the user can enable on:
    i> Auto Detect Status
    ii> Not Available
    I would like to add essages like "Be Right Back", "In Meeting", etc....just like we have in Yahoo Messenger.
    I found the par file which is respensible for such  Collboration feaures & its:
    "com.sap.netweaver.coll.shared.ui.par"
    but when I opened the par file to check the details...noticed that all is in the portalapp.xml file.
    Cannot understand where can i add new messages....
    Please help...
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu R Hunjan
    <i>Note: Please excuse me for posting this in EP Development Content and not KMC Forum section.</i>
    Message was edited by: Ritu  Hunjan

    Reinstalling isn't a drastic measure w/Snow Leopard. It just replaces all OS components with new and uncorrupted ones and Apple's basic apps, such as TextEdit, Mail, Safari, and Terminal. That eliminates any mucked up ones. Once you assure yourself that the problem's solved, make a bootable backup/clone or Time Machine backup and update via Software Update. Let us know how it turns out.

  • How to add New status values in product

    Hi,
      In product master COMMPR01 presently system is shwoing only two vaues Blocked (ERROR), Blocked (Warning), even I have downaloded the sales staus from ECC to CRM using R3AS object 'DNL_CUST_PROD3' but on the screen system is not shwoing thos values.
    How to add new values in staus field.
    Regards,
    zafar

    Hi,
    Refer these links
    Re: GR for a production order
    status profile
    Regards,
    Vishal

  • How to create a user new user status as closed for aWBS element

    Hi,
    Can any one explain me the process of how to create a new user status '' Closed'' for the WBS element which when trying to close has error and are not able to close. So can we create a new status inroder to close the WBs element
    Thanks nd Regards
    Sri

    Hello Srihari,
    Use OK02 transaction to create a status profile. You can create a new user status in the status profile.
    If you already have a status profile which is maintained in the master data, then you can create a new user status as closed to that status profile.
    Hope this will help you..
    Regards,
    Praisty

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

  • How to add new fields to the system form (Ex.expenses to a/r invoice form)

    hi
    can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
    i want to add expenses field to system a/r invoice form and connect data base also.
    i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
    reply soon plz..
    thankQ

    If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

  • How to add new fields in SAP-Query

    Hi,
    Can any body tell how to add new fields to the existing query.
    Thanks a lot,
    Bhaskar.

    hi,
    when we create internal tables like. in final table you can include the extra fields.
    data : begin of itab_mara,
             matnr like mara-matnr,
             erdat like mara-erdat,
             end of itab_mara.
    data : begin of itab_marc,
             matnr like marc-matnr,
             werks like marc-werks,
             end of itab_marc.
    data : begin of itab_final,
             matnr like mara-matnr,
             erdat like mara-erdat,
             werks like marc-werks,
             date like sy-datum,
             status(10) type c,  * new fields
             end of itab_final.
    <select statement>.
    Append all the fields to itab.
    loop at itab_final.
    write :/ itab_final.
    endloop.
    Reward with points if helpful.
    Message was edited by:
            Vinutha YV

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • How to add a user defined HTTP header field?

    Hi, everyone!
    I want to add a user defined HTTP header field to a HTTP
    response header.
    I use the following statements in testHeader.jsp
    response.addHeader("myheader", "123");
    response.sendRedirect("middleHeader.jsp");
    in middleHeader.jsp,
    out.print(request.getHeader("myheader"));
    But the output in middleHeader.jsp is null!
    How to add a user defined HTTP header field to a HTTP
    response header? Are there some sample codes?
    Cheers,
    George

    the send redirect actually creates a new request (through the client) and thus a new response
    thus the headers you set in the response are gone for the next request/response
    You can try servletDispatcher.forward

  • Can't Kerberize or add new users

    I keep experiencing the same strange behavior: after a variable amount of time (from hours to days) Open Directory in Server Admin will show that Kerberos is not running. When I click the Kerberize button, neither the server admin account nor the domain admin account will work. I just keep getting prompted for a password in a loop.
    Restarting may or may not show the Kerberos service running.
    In either case, I then cannot add new users to the domain. The New User button in Workgroup Manager is disabled.
    I'm really new to Mac Server (I don't even know enough to be dangerous); so, I'm not sure how to troubleshoot this issue. I'd like to transition users to portable home directories, but the solutions I've read to Kerberos problems is to demote the server and the promote. But that wipes the users, so, I don't really want to go that route.
    Any help is appreciated.
    Jeff

    Hi
    If you can authenticate to the OD node – and it only needs to be once – you can select all your users (not Directory Administrator UID 100) and export them. WGM > Server Menu > Export. How many are there? This will allow you to reimport them later on into any directory node you like, local NetInfo or OD. Passwords do not carry over but this is no big deal as you can assign a password policy later on. When first populating the OD node with users and groups its a good idea to export and save them all to a memory stick or something suitable. It may not help you in this situation but its a good tip for later on.
    As Leif says if Kerberos is stopping or starting and generally being flaky its usually (but not always) down to a problem with DNS somewhere.
    There are other possibilities. Perhaps the Server has been joined to an Active Directory KDC? If thats so the users you may be seeing are already on the AD Server and there is nothing to lose. It could also explain why authentication is a struggle. Your post also seems to be indicating a time sync issue, (along with DNS another common problem). Inspect the edu.mit.Kerberos file located in /Library/Preferences on the clients to see which KDC is issuing tickets. It may not be the OD Master. If you find that the server is supplementing AD and not providing SSO then its should be safe to demote. Ultimately this is really the only effective solution. Demote to Standalone and sort out the DNS problems (if any) and repromote.
    There is another possible solution which you could try if you feel brave enough.
    When the server get promoted to OD Master slapd creates the slapd_macosxserver.conf file in /etc/openldap. This file will contain an entry for the root LDAP user – rootdn. Just as System Administrator (UID 501) admin has root sitting behind it so does Directory Administrator (UID 1000) diradmin. This root user has total control over all the data inside the LDAP database, standard access controls do not apply to this user. The important bit about rootdn is that ANY USER and PASSWORD can be used. The user and password does not even have to exist in the LDAP database itself, it only needs to exist in slapd_macosxserver.conf. The default system admin account or root can edit this file to add a new user and password (it can be MD5 or plaintext), slapd will then assume that any user which can authenticate to the newly created name and password is the root user for the LDAP database and will give full access to user records and the OD node itself. Create a new user in the local NetInfo node first, try not to use diradmin and UID1000.
    Hope this helps – Tony

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

Maybe you are looking for