How to add new file type in the xmp allowed files list

I have to embed metadatas in files that are not listed in the xmp compatible format ( 3D files like dae or obj).
Is it possible to describe metadatas in  a "sidecar" .xmp files and ask Bridge to embed this metadatas when uploading the files to a Dam ( e.g. Adobe CQ) like what is possible with Digital Photography raw formats, and is handled by Lightroom ?
Thanks

Hi,
In general it is not possible to use Bridge to embed sidecar XMP information into files like Lightroom is doing it. And Bridge only supports metadata read/write in those formats and in those ways as are defined in the XMP specification.
But you can use the latest XMP SDK to write your own handlers for file formats that are currently not supported. Those file handlers can then be used in either your own application that uses the XMP SDK or any Adobe Video application like Premiere or After Effects to read/write sidecar files or embed XMP metadata into the files. Currently it is not possible to use those file handler plug-ins in other Adobe image applications like Bridge or Photoshop.
Please see the XMPFiles Custom File-Handler Plug-in SDK for more information.
Please note that other applications (like CQ) might probably not automatically pick up the metadata you wrote into the file or in a sidecar file, as the other application might probably not have the "knowledge" or technical means to handle metadata in such file formats where you wrote the metadata in a custom way.
Regards
Jörg
Adobe XMP

Similar Messages

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • How to add new data type

    I need to add new data type like SDO_GEOMETRY in spatial Oracle.
    I don't mean the User-Defined Datatype but new datatype imbed in the database.
    It might be written in C++ or Java but I do not know how.
    Any hints and help will be appreciated. Thanks,

    > It is not simply defining new VARCHAR3.
    I will compare embedded new built-in data type and UDT as part of my research.
    What I really meant was what do you want from your new type that a user-defined object can't give you? (Apart from the obvious shortcomings of Oracle object types being addressed, but that could take a while.) You specifically said "I don't mean the User-Defined Datatype but new datatype imbedded in the database" and I wondered what you meant by that.

  • HT1296 how to add new photos without deleting the existing photos in ipad

    Hi,
    Can anyone tell me how to add new photos/PDF books from my PC to iPad without deleting the exsting data in iPad?

    Hello AJ2349
    If it is prompting you that it will replace the data on your iPhone, then that is typically the result of syncing with a different computer. The only way you can bypass that is to replace the media on your device and then sync. Now it will only replace items that would be considered purchased items like music, movies, TV shows and Apps and would not delete any pictures from your iPhone. Alternatively you can setup a Shared Photo Stream and then add the Photos there without syncing your iPhone with your computer. Check out the articles below for more information.
    iOS: Issues syncing content with multiple computers using iTunes
    http://support.apple.com/kb/ts1474
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    iCloud: Shared Photo Streams FAQ
    http://support.apple.com/kb/HT5903
    Regards,
    -Norm G.

  • How to add new marketing attribute to the existing marketing attribute set?

    Hi all,
                  I searched for existing forums but I didn't find the required one. I found some using Tcodes ,which is not my requirement. My requirement is to add new marketing attribute to the already existing marketing attribute set. This  attribute set is created by my team lead with 4 attributes but now i have to add new attribute to this set so total will become 5 attributes for this attribute set. This has to be done through marketing professional business role. If this is not done through marketing attribute set, then I will go for the transaction where I can add marketing attribute for attribute set.
    Please send the details of both marketing professional business role and transaction code.
    Your help is highly appreciated.
    Thanks,
    Baasanthi.

    Hi,
    SAP CRM Marketing Attributes explained
    Path to create Marketing attributes from webui: log in with Marketing Pro role->Marketing->Create->Marketing Attribute
    Regards,Sumeet

  • How to add new browser type in visual studio 2010 performance test?

    Hi All,
           Currently we have various list of browsers in browser type drop down,Suppose if i want to add browsers like Internet Explorer 9 (or) 10,Firefox 33 (or) later version.How to add?

    Thanks for Adrian's help.
    Hi Balaji,
    Based on your issue, I agree with Adrian's suggestion. Therefore, I suggest you can try Adrian's suggestion to refer the link of Cybermaxs' reply check your issue.
    In addition, I suggest you can use fiddler to check the header definition.
    For more information, I suggest you can refer the Shiv_P's reply in the following link.
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/9bb37eec-3467-4fcb-8537-648d04e91e2f/how-to-add-latest-chrome-browser-plugin-in-visual-studio-2010-ultimate-for-performance-testing?forum=vstest
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to add new file associations/

    How do I fix this below?
    - Safari refuses to open csv files in excel -- instead when I click on a csv file from a website, it gives me a bunch of text. And when I try to save it to my desktop, it appends ".txt" to the end of the file name.
    - How can I add/change file associations on mac using terminal?
    Message was edited by: brownlimie
    Message was edited by: brownlimie

    Hi,
    Here are two methods for you.
    1. CSV file is 'comma separated values' in text file and so by default it will be saved as a .txt file. However while saving it onto the desktop you can choose .xls format in the drop down that specifies the format. Then try to open the file in Excel.
    2. Right click on one of the text files stored and open it with the Excel. Then right click on the file name and go to 'Get Info'. From the get info window, change the file extension and under the open with drop down select Excel.
    If these two options are not working then probably the file cannot be imported to Excel or Excel is not installed.
    Hope this helps you........... Regards

  • How to add new Object Type In Mass

    Hi Expert,
    We have to required change Payment term of Customer (ZTERM) in scheduled Agreement,
    we have gone through Mass, but presently no object type available to change in scheduled Agreement, So can we add the new object in Mass? & How? Please help.
    Regards
    BK GAIKWAD

    Hi,
    Presently no standard object type avaialble for Sch. agr.(Sales)
    Go for BDC for updation of your field (try with LSMW also)
    Thanks
    Chidambaram

  • How to add new fields to the DME file in F110

    Hi,
    We have a requirement add new fields to the file that is used in  F110.
    .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
    Can anybody please help me in resolving the issue.
    Thanks
    Venkat
    Edited by: Venkat R on Jun 8, 2009 8:45 AM

    Hi,
    There is no function module for that, We have created our own function module and attached to that field.
    Refer the below code. This will fetch the document number.
    DATA: lwa_item   TYPE dmee_paym_if_type,
            l_fpayp   TYPE fpayp,
            l_fpayhx TYPE fpayhx,
            first_flag TYPE c,
            lv_lifnr   TYPE lifnr,
            voucher_id TYPE string,
            voucher TYPE string,
            invoice_id TYPE belnr_d,
            voucher_len1 TYPE i,
            voucher_len TYPE i.
      TYPES:
      BEGIN OF lt_regup,
            xblnr TYPE xblnr1,
            belnr TYPE belnr_d,
      END OF lt_regup.
      DATA: lt_regup TYPE STANDARD TABLE OF regup,
            lv_regup TYPE regup.
    Hope this helps.
    Raja.A
    Edited by: Raja.A on Feb 16, 2011 7:17 PM

  • How can i add new files to my ipod from a different computer  without losing the added files on my ipod?

    how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?

    Email them? Use DropBox?  What type of files?

  • How to add new row and update existing rows at a time form the upload file

    hi
    How to add new row and update existing rows at a time form the upload file
    example:ztable(existing table)
    bcent                      smh            nsmh         valid date
    0001112465      7.4                       26.06.2007
    0001112466      7.5                       26.06.2007
    000111801                      7.6                       26.06.2007
    1982                      7.8                       26.06.2007
    Flat file structure
    bcent                       nsmh         valid date
    0001112465     7.8     26.06.2007  ( update into above table in nsmh)
    0001112466     7.9     26.06.2007  ( update into above table in nsmh) 
    000111801                     7.6      26.06.2007 ( update into above table in nsmh
    1985                      11              26.06.2007   new row it should insert in table
    thanks,
    Sivagopal R

    Hi,
    First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
    Then :
    Loop at it.
    *insert or modify as per your requirement.
    Endloop.
    Regards,
    Srilatha.

  • How to add new data file

    Hi Friends,
    We have 4 below file systems.
    Sybase/TST/sapdata_1
    Sybase/TST/sapdata_2
    Sybase/TST/sapdata_3
    Sybase/TST/sapdata_4
    Already we have added one data file each in sapdata_1 and 2.  Sapdata3 and 4 are emptry.
    How to add new data file in sapdata3 or 4.
    Please provide syntax for creating a new data file and steps for the same.
    Regards,
    Karthik.

    Just for the record: you have here the DBACockpit documentation:
    https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000571562012E
    And this is a sample of the extend to be executed:
    Regards,
    Victoria.

  • To add new file type in SharePoint

    Hi,
    I am trying to add new file type for sharepoint site like MSWord, PDF etc.,
    Are there any ways to create new file types in SharePoint? My requirement is to create a file type for AutoCAD drawings (.dwg format).
    Please note, we are using SharePoint 2007 version!
    Thanks

    Browse to the Central Admin site
    Select the Operations tab
    Under the Security Configuration section, click the link for
    Blocked file types
    Select the Web Application that you would like to modify from the drop down list
    Each blocked file extension displayed in the list is blocked by SharePoint.  To enable the blocked file extension, simply remove it from the list.
    Check with your type and if its there unblock it.
    Regards, Dharnendra Shah "strong belief is the only way to success"

  • How to Add a correspondence type and tick the parameter(FI Down Payment)

    Hi All,
    To use the Down-Payments functionality of SAP for customer payments. Part of the process will be to print off a request for the customer to pay based on data that is entered into transaction F-37 (Down-Payment Request).
    I have created a new sapscripts for the Down-Payment Request. We will need a new correspondence type creating for this print. For ZFI006 to show anything the u201CNoted Itemsu201D must be ticked when printed in ZFI006 using correspondence ZAP11.
    Kindly advice me how to add a new correspondence type and the u201CNoted Itemsu201D must be ticked?
    Thanks.

    Hi,
    You cannot define a payment type as that is based on a lookup defined under the navigation Setup>lookup>Payables.
    This look up access level is System whihc implies it does not allow user level values to be defined.
    So you have to use the available payment types,
    Thanks
    Manish Jain.

  • How to add new music files in Hp connecterd music

    I am new to HP connected music.  I want to understand the following
    a)  Where does HP connected music app look for music in our computer.  I want to know the location of folders.
    b) How to add new music files into playlists
    can anyone help please.
    RAVIKUMAR RT

    Hi @rtravikumar 
    I see you are looking for some help with HP Connected Music.  I did a little bit of searching and found the following pages that should be useful to you.
    HP Connected Music Powered by Meridian (Windows 8)
    HP Connected Music FAQ
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • Call transaction and skip first screen

    Hi, I have a little but I think difficult problem I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramt

  • IXML - Checking if a specific node exists in XML data

    Hi, I´m reading XML data by using iXML classes. One XML file I´m reading contains header and item data. Right now I´m starting with reading the header attributes and then read all nested nodes and their attribute data. That works all fine, but now I

  • Query not showing desired result

    Hi All, DB :-10.2.0.3 I am using following query to extarct the backuppice, which falls between the dates specified by query. I am really amazed, why it's not giving me the expected results. select handle, to_char(start_time, 'dd-mon-yy hh24:mi:ss')

  • Problem Importing Keywords with jpg photos into Library

    I am a new and enthusiastic LR user working to migrate from iMatch, where I have kept my ~80,000 photos organized for the last several years. However, my last roadblock to being able to do that is the import of keyword information (or as iMatch calls

  • Will I have less system overload with new mac?

    Hi guys, I have a mid-2009 (Duo Core 2.3 ghz. 12 gig ram) 27" iMac. Lately I very often get system overload. I am still using Logic 9. When I open the CPU meters both Audio cpu meters are maxed out (so in red). When I test the same project in logic X