How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this  at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

Similar Messages

  • SAP Cloud For Customer : Add Custom Document Type For Attachments in Account Screen

    Hi Experts,
    I have requirement to add document type for the Attachment as shown below in COD_Account_TI screen.
    I have highlighted in yellow is it possible to add custom document type.
    1) Where we need to maintain in the configuration or we need require SDK ?
    I have maintained 1 custom document type under the path :
    Business Configuration --> Open All Activity --> Fine Tunes --> Activities --> Maintain Document Type
    2) Is this correct path or we nee do maintain in another location or path?
    3) if not possible using configuration ? How it is possible using SDK work?
    Many Thanks,
    Mithun

    Hi Mithun,
    We had this problem with the Hyperlinks.
    You should look at your Event Handler from the Inport or the Event Handler of the query. Some Data Operation with assign function can lead to an infinite loop.
    Like assigning the inport data field to your list that is bound with a custom query.
    Best Regards,
    Madalin

  • How do I enter Document Type for Purchase requisition IDOC

    Hello,
    File - IDOC (PREQCR.PREQCR02)
    The file is getting picked up and shows up a checkered flag in Moni..
    but in WE05, on R3 side, i see an error message
    "Enter Document Type"
    How do I enter document type for Purchase requisition IDOC?
    will that solve this issue?
    thanks and regards
    Nikhil.

    Hi,
    For error 51, you need to set the default document type in the inbound processing FM of the IDOC
    Standard type - NB
    Subcontrator type
    Blank PO
    Service PO
    Stock transport PO.
    Document types is used for below things,
    1. It controls the no. range of the document i.e. the doc no.
    2. It controls whether doc no. is auto assigned or manually entered
    3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
    4. It controls the physical doc filing
    Thanks
    Swarup

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • How to add style(color) info for the color used in ALV tree nodes

    I have an object for CL_GUI_ALV_TREE and I have added nodes to the tree and has set color for the nodes using 'STYLE' parameter. Now if I have to add the style info to the style(color) then how do I do it using the object I have?
    Edited by: Sujay V Koparde on Feb 20, 2008 4:27 AM

    Yes Eshwar, its similar to what you have written but my problem was that the style has already been assigned in the code and now I want to assign the style info(tooltip text) to the style(colour). I have an object of class cl_gui_alv_tree as of now and I am not able to find out as to how do I proceed to assign style information

  • How to add new file type in the xmp allowed files list

    I have to embed metadatas in files that are not listed in the xmp compatible format ( 3D files like dae or obj).
    Is it possible to describe metadatas in  a "sidecar" .xmp files and ask Bridge to embed this metadatas when uploading the files to a Dam ( e.g. Adobe CQ) like what is possible with Digital Photography raw formats, and is handled by Lightroom ?
    Thanks

    Hi,
    In general it is not possible to use Bridge to embed sidecar XMP information into files like Lightroom is doing it. And Bridge only supports metadata read/write in those formats and in those ways as are defined in the XMP specification.
    But you can use the latest XMP SDK to write your own handlers for file formats that are currently not supported. Those file handlers can then be used in either your own application that uses the XMP SDK or any Adobe Video application like Premiere or After Effects to read/write sidecar files or embed XMP metadata into the files. Currently it is not possible to use those file handler plug-ins in other Adobe image applications like Bridge or Photoshop.
    Please see the XMPFiles Custom File-Handler Plug-in SDK for more information.
    Please note that other applications (like CQ) might probably not automatically pick up the metadata you wrote into the file or in a sidecar file, as the other application might probably not have the "knowledge" or technical means to handle metadata in such file formats where you wrote the metadata in a custom way.
    Regards
    Jörg
    Adobe XMP

  • How can i insert document number in the Idoc status

    Hi All,
        I am working on customized program, which will post the inbound Idoc data to transaction. Once everything updated / posted, Idoc should show the status 53 with description - <b>'Document XXXXXXXXX is created / changed</b>'. 
        I knew that we can use messages like ' Document &1 is created / Changed' in place of &1 need to replace with document number, but could not able to do that, can you please help me as soon as possible.
    Thanks
    Jayasri

    Hi,
    check this code
    LOOP AT itab_status WHERE mess NE 'WMMBXY'.
    SELECT SINGLE * FROM edids INTO wa_edids WHERE docnum = itab_status-idoc
                 AND countr = itab_status-status_counter.
          IF  wa_edids-statxt CA '&'.
            v_msgno = wa_edids-stamno.
            IF v_msgno NE '000'.                                "----mod3
              CALL FUNCTION 'MESSAGE_PREPARE'
                   EXPORTING
                        msg_id   = wa_edids-stamid
                        msg_no   = v_msgno
                        msg_var1 = wa_edids-stapa1
                        msg_var2 = wa_edids-stapa2
                        msg_var3 = wa_edids-stapa3
                        msg_var4 = wa_edids-stapa4
                   IMPORTING
                        msg_text = itab_status-descrp.
              CONDENSE itab_status-descrp.
            ENDIF.                                              "---- mod3
          ELSE .
            itab_status-descrp = wa_edids-statxt.
          ENDIF.
          MODIFY itab_status.
        ENDLOOP.
        LOOP AT itab_status WHERE mess EQ 'WMMBXY'.
          itab_status-descrp = 'APPLICATION DOCUMENT POSTED'.
          MODIFY itab_status.
        ENDLOOP.
    i guess you can do similair thing in your case too.
    let me know if you need any further help
    thanks
    venki

  • Different document type for Preq's created by the PM-order.

    Hi folks,
    Currently a PM order auto creates a Preq, after releasal of the PM order. The Preq now has the standard document type NB. Is there any way to use a different Preq document type for the req's created by the PM-order?
    Thanks for the suggestions.

    Questions is answered.

  • Document types for Entry view Vs document type for General Ledger view

    Dear experts...
    Can you explain what is the deference between Document types for Entry view and document type for General Ledger view?
    Dasu

    Hi,
    Document Types for Entry View
    In this activity, you define your document types. Document types are used to differentiate the business transactions and to manage how document are stored.
    Document Types for General Ledger View
    You define for non-leading ledgers the document types for the documents in the General Ledger view. At the same time,  you assign for each document type a number range to be applied in the     assignment of document numbers:
        o   You do not need to make these settings for your leading ledger
            because, in the case of this ledger, the document number in the
            entry view always corresponds to the document number in the general
            ledger view.
        o   You only have to make these settings for any non-leading ledgers
            that have a fiscal year variant that differs in at least one company
            code from the fiscal year variant of the leading ledger in this
            company code. In this case, the document number in the entry view
            does not correspond to the document number in the general ledger
            view and you have to define a separate document type with document
            number assignment for the general ledger view.
            For all non-leading ledgers that, in the company code to which the
            postings are made, have a fiscal year variant corresponding to the
            fiscal year variant of the leading ledger in this company code, the
            document number in the entry view always corresponds to the document
            number in the general ledger view.
            Note
            The need to define a document type for documents in the general
            ledger view depends only on whether the fiscal year variant of the
            non-leading ledger in the company code (to which the postings are
            made) differs from the fiscal year variant of the leading ledger in
            this company code.
    Regards,
    Kiran

  • PO document type for third party PO...?

    Hello friends,
    My client's requirement is that third party PO should have different document type, say ZTRD?
    I tried to configure the same with PR and PO doc types.  I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
    I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
    Please help me to configure the Z doc type for third party PO. 
    Thanks in Advance,
    Pat.

    Hi
    Please try the following, do not delete the standard settings
    1) Create Z document type for PR and assign this document type to relevant Schedule line Category  ( CS for example) in SD
    2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
    Hope it helps.
    Thanks/Karthik

  • Document types for late entry using bar code

    Hi,
    We want to enable bar codes for Delivery document types for late
    archiving.
    We got the same for slaes order type in below mentioned path
    SPRO --> Sales and Distribution --> Data transfer and Archiving -->
    Assign document type --> Document types for late entry using bar code
    or Transaction code VNOP.
    We want similar transaction for delivery document type i.e. LF also so
    that we can assign archive document type for the same.
    Thanks,
    Preethish

    Hi Alex,
    For Character devices, you have to use SAPConsole. 
    For GUI devices if you want to use online, it should be ITSMobile(Earlier this was WebSAPConsole).
    Thanks.
    with regards,
    Muthu Ganapathy.

  • How to block one of the purchasing document types for certain period

    My client asked me to block the one of the purchase order documents for certain period.In what way i can do it? and also it shouldn't be displayed in the purchase documents list when we do me21n?
    Advanced thanks,
    Sateesh

    Hi Sateesh,
    Here u cann't block the Document type,
    U can do this,only the way to delete that document type for certain peroid.
    Thanks & Regards
    Suresh
    > My client asked me to block the one of the purchase
    > order documents for certain period.In what way i can
    > do it? and also it shouldn't be displayed in the
    > purchase documents list when we do me21n?
    >
    > Advanced thanks,
    > Sateesh

  • How to define certain document type (BKPF-BLART) for certain movement (101)

    Sometimes ( I think it is becuase of the tcode)  certain purchase 101 movements create a WA type FI document and some other times purchase 101 movements create WE type FI documents. I have seen a table ( accessing from omba transaction) in which for diffenent tcode´s we have either WE or WA. If we always use migo transaction why sometimes in bkpf we have migo_tr, migo_gi, ....;....
    How should I do in order to create always WE FI documents for purchase 101 movements?
    Thanks in advance.

    Check the settings in SPRO-MM-Inventory Management-Number assignemnt-Define number ranges for accounting documents.
    Here you assign accounting document type to tcodes.
    Normally , WA is used in receipts for MB1C/MIGO_GI tcode - for e.g for 561 mvmt type.
    SAP recomends keeping this setting as it is.
    SAP help text copied here for reference:
    Define Number Assignment for Accounting Documents
    In this step, you set the number ranges for the accounting documents which are created when goods movements or inventory differences are posted.
    Accounting documents in inventory management
    For accounting-relevant goods movements, the system creates two different documents:
    material document
    accounting document
    Both the material documents and the accounting documents have their own document numbers. When inventory differences are posted, the system also creates an accounting document for the physical inventory document.
    In this step, you only maintain the number assignment for accounting documents.
    Document types
    Accounting documents are split into document types to allow differentiated document number assignment, which is the basis for distinguishing between the various accounting operations. A number range is assigned to each document type. In a company code, you have to define number intervals for each number range and fiscal year.
    In inventory management, the transaction determines which document type is used.
    Example: Goods receipt for purchase order
    Requirements
    You have already defined the company code.
    Default Settings
    In the standard SAP System, the following document types are predefined for inventory management:
    WA  for goods issues, transfer postings, other goods receipts
    WE  for goods receipts with reference to purchase orders
    WF  for goods receipts with reference to production orders
    WI  for inventory differences
    WL  for goods issues with reference to deliveries (SD)
    WN  for net posting of goods receipts
    PR  for revaluation documents
    Each document type is already assigned a number range. In company code 0001, number intervals are defined for each number range both for the current and the previous fiscal year.
    Number range 49 with the year-related interval 4900000000 to 4999999999 is assigned to the document types for all goods movements, except goods movements with reference to purchase/production orders.
    Document type WE is used for goods receipts with reference to purchase orders and production orders. This document type is assigned number range 50 with the year-related interval 5000000000 to 5099999999.
    Please note that net postings of goods receipts (document type WN) are not active in the standard SAP System. If you want to post goods receipts net, you have to assign document type WN (instead of WE) to the transaction MB01.
    Document type WI is used for posting inventory differences. This document type is assigned the number range 01 with the year-related interval 0100000000 to 019999999999.
    SAP Recommendation
    Activities
    1. Check whether you can use the standard settings.
    2. If not, you have to add new document types to satisfy your requirements:
    a) Define a new document type under Financial accounting document
    b) types.
    c) Assign a number range to the document type.
    d) Under Financial accounting number ranges, define the year-related number intervals for the given number range in your company code. If you do not want to use the year-related number assignment method, enter 9999 in the Year field.
    e) Under Allocate document type to transaction, assign the relevant document type to the transaction codes of inventory management.
    Document type PR (revaluation documents) is already assigned.
    Notes on transport
    You transport number range objects as follows:
    Choose Interval -> Transport in the accounting document Number Range screen.
    All intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    All other activities are linked to the automatic transport.
    Edited by: Saurav on Jan 24, 2011 6:03 PM

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to add a related content for a particular document in UCM

    Hi All
    How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
    With thanks and regards
    Anoop

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

Maybe you are looking for