How to add new line in transact move order line
Hi,
i am able to update locaotr in Transact move order.
But i want to add two locators for the same line.
I tried to insert one more record in data base, but getting error unique index error.
so how can we add new line in transact move order line .
please help to slove this isse.
Thanks In Advance
Venu.
Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks
Similar Messages
-
Back order line in transact move order form , drived the inventory negative
Hi,
I had problem with transacting some lines in several move orders (it was stuck and giving error each time I tried to transact or delete from view update allocation –> delete line)
In order to cancel these lines to proceed the manufacturing process I back ordered those lines by:
Inventory super user - > move orders - > transact move order - > tools - > back order line
Note that the move orders type was Manufacturing Pick
Now I noticed that this drives the WIP subinv Negative for those items .
So what is the problem and how can I solve it?
Thank you
Edited by: Ahmed.Abbas on Apr 16, 2011 2:39 AMhi,
The problem was in the interface managers (Material transaction , Move transaction ) were inactive , i launched them
Review note 141493.1 in metalink to know how.
I also deleted the pending transactions with errors from mtl_material_transactions_temp and mtl_transaction_lots_temp ( the items were lot control ) .
Thats all :) -
How to add new condition record to sales order items
Hello All,
I have requirement to add to new condition record to get more discount on the item during sales order processing based on some conditions. In user exit SAVE_DOCUMENT_PREPARE , I am populating an internal with items for which additional discounts are required. So want to add condition record to those items to get additional discount.
I know that in VOFM routines we can modify the existing condition record value but not sure what is the best place to append new condtion record to conditions table.
Thanks,
SumanHi suman,
As which conditions you want or whatever logic you want for to write for applying the conditions you need to make changes at two includes and one FM by using Implicit Enhancement
1) MV45AFZZ
2)RV61AFZB
3) FM name i am not remembering you can debug and find out.
Regards,
Shahezad -
How to add new line in message on my S890
My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks -
How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K
HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
SendilI got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE -
How to add new tab screen in transaction BP
Hi,
Please let me know How to add new tab screen in transaction ukm_BP. Is there any SPRO configuration needed for this?
Thanks,
Debi.Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
search2(3),
search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
SELECT SINGLE * FROM modact WHERE member = modsap-name.
IF first_row EQ 'Y'.
WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
45 modsap-member, 70 modact-name.
first_row = 'N'.
ELSE.
WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
ENDIF.
CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael. -
hai Friends , i've some problems, i really don't know how to add new line when typing
ThanksSorry you feel that way. It is still a new platform and is improving with every update. Hopefully the next update will make things better for you then.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
How to restrict Sales Order LOV in Transact Move Orders
Hello
We would like to restrict LOV in the Transact Move Orders screen to only those orders that were created in that specific Operating Unit. Also, we would like to control the LOV for Release Rules to a specific OU.
I believe the LOVs for both these screens pull from MTL_SALES_ORDERS. Therefore, I guess we would need to create a Value Set of type Table, value will be SEGMENT1 (Sales Orders) but unsure about the where condition.
Any help would be appreciated.
SanjibSanjib
Release Rules: Why don't you use the SRS version if pick releasing rather than the screen. Ofcourse you lose some flexibility to enter order number and customer information. If screen is a must you can take the LOV from the existing form and create a new record group in the new form instance trigger. Add this peice to the lov sql to control the pick release rules result:
(select 1 from org_organization_definitions cust_org
where org.organization_id=cust_org.organization_id
and operating_unit=FND_PROFILE.VALUE('ORG_ID'))
This org is mtl_parmeters table used in LOV.
2. Transact Move Orders: Instead of changing the LOV and playing with the Sales Order Flexfield, you can use the inventory organization security to control who can do a transaction. This will not change the LOV but definitely will control the access to the records after you have queried. As you know this is inventory or warehouse function not the OE function.
You can try one idea though:
Segment2 is order_type which is OU specific. You can create value set that picks the LOV from the order types table for a specific OU, assign that to the segment2 and create a security rule. This rule will have include and exclude rules. You include all the Order types that are in a specific OU and assign that rule to the resp of that OU where move order is transacted. This will limit the LOV of the order types to only those that are availble for that resp. I have not tried this but give it a shot.
Thanks
Nagamohan -
How to add new fields in Reduced message ( in BD53 )
Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
NinadHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
-
How to add new fields to the DME file in F110
Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AMHi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item TYPE dmee_paym_if_type,
l_fpayp TYPE fpayp,
l_fpayhx TYPE fpayhx,
first_flag TYPE c,
lv_lifnr TYPE lifnr,
voucher_id TYPE string,
voucher TYPE string,
invoice_id TYPE belnr_d,
voucher_len1 TYPE i,
voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
xblnr TYPE xblnr1,
belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM -
How to add new EEW Business Objects
Hi guys,
could you please give me a solution how to add new business objects? Following are the SAP Objects that you can Enhance Using EEWB:
ADS Analytical Data Storage
BUPA Business Partner
BUPR Business Partner Relationships
BUSINESS_ACTIVITY Business Activity
BUSINESS_TRANSACTION CRM Business Transaction
CATEGORY_ENHANCEMENT Category Extension
COMPLAINTS Complaint
COUNTERS Counter
CRM_CASE СRM Case
CRM_RPT Resource Planning Tool
GRANTOR_PROJECT Grantor Project
INDIVIDUAL_OBJECT Individual Object
INSTALLED_BASE Installed Base
LEAD Lead
MARKETING_ELEMENT Marketing Element
OPPORTUNITY Opportunity
PPR Partner/Product Range
RELTYPE Relationship Category
SALES_CONTRACT Sales Contract
SALES_TRANSACTION Sales Transaction
SERVICE_CONFIRMATION Service Completion Confirmation
SERVICE_CONTRACT Service Contract
SERVICE_TRANSACTION Service Process
SOLUTION_DATABASE Solution Database
But, i didn`t find how add it.Hi,
To my knowledge adding objects to EEWB is possible by customers, SAP controls which all objects enhancement are possible through EEWB, the objects which you have listed are supported by sap for enhancement via EEWB.
If you are on CRM 7.0 you can use AET which supports more objects that can be enhanced.(AXTREG - transaction for AET supported objects)
Hope this helps.
Cheers,
Sumit Mittal -
How to add new T Code FB01L in OBU1
Dear Expert,
How to add new T Code FB01L in OBU1
Regards,
AlokHi, Alok.
It is not possible to add new entries to table TSTCP via transaction OBU1 (you can only modify the default parameters for the existing transactions). However, new default parameters for other transactions can be created via transaction SE93 (trans F-44). You can review notes 19798 and 310587 for further information.
I hope this helps.
M Trein -
How to add new column inside ME28 PO Approval Screen?
Hi Abapers,
Can u please explain and give sample code to me, how to add new customise column inside standard Layout ME28 PO Approval Screen.
Waiting for yours reply.
Tks,
S.Muthu.Hi
Don't need a code or customize.
1- Execute ME28
2- select a line in the ALV
3- type 'F1'
4- Go to technical information
5- Go to Table name 'MEREP_OUTTAB_PURCHDOC_REL' it is a structure
6- Append the new field into that structure using SE11
7- return to ALV in ME28 and change Layout
8- you will find at right your new field, deplace it to left part and it's OK.
REM :your new field will be filled only if the ME28 program is reading your field and passing it to the ALV structure (MEREP_OUTTAB_PURCHDOC_REL)
It worked for me with EKPO-AFNAM
cordially,
Faycel MOSLAH.
Maybe you are looking for
-
TS1717 Error 42110 comes up at the end of my rental download and it wont play.
Error 42110 comes up at the end of my rental download and it wont play.
-
i make music on my macbook but i want that analog sound,i dont like the digital sound its too clean and predictable,what kind of output gear should i get to bring me back the analog feel in my recordings,does logic pro have plug ins that are worth a
-
How Can I fix This Error....?? Please Help !!
Hi, I can't seem to figure out how to fix an error I keep on getting. Here is the error: C:\Documents\LZW.java:171: cannot resolve symbol symbol : class BitOutputStream location: class LZW os = new BitOutputStream(os) ; ^ C:\Documents\LZW.j
-
Best practice for sharing LOV's over multiple Application Definitions?
We want to define/generate (complex) LOV's in 1 place and use them in multiple sub-applications (different application definition files). What is the best practive to accomplish this? Frank
-
Question about blocklist.xml
OK so I was browsing thru my AppData\Roaming\Mozilla\Firefox\Profiles\********.default and I acdently clicked blocklist.xml and it opened in IE would have this infected my pc i noticed it had alot of blocked urls? or emails or somthing in there. plz