How to add new time char of IC to multiprovider

Hi Experts,
Could any pne help in how to include the newly added time char in two infocubes out of 5 infocubes of multiprovider
Thanks In Advance
Nitya

Hi Nitya,
Right click on Multiprovider--changedrag and drop time char in to dimensionnext click on Identify characteristic--here you need to select the info providers from which you to get data for time char. ie you need to selet the required two cubes out of five.
Regards
Surendra
Edited by: vaade surendra on Mar 27, 2010 5:20 AM

Similar Messages

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.

It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

HOW TO ADD NEW HR OBJECTS ????

Hi,
i would like to new objects in HR object selection list,especially for PPOCE.
I donot know how to add new objects in the object selection list.
pls anyone who knows this ,could share your knowledge with me.
tks
theresita

Hi Theresita,
All the configuration is in the IMG under Personnel Management > Organizational Management > Hierarchy Framework. You'll want to review all the entries and related documentation, as adding objects to PPOME/PPOCE is not a simple 'one table' process. You may need new evaluation paths to support the views you want to see in the framework, so set these up ahead of time. Parameters to support your configuration are: OM_ARRAYTYPE_DISPLAY; OM_DIS_OBJECTMANAGER; OM_FRAMEWORK_OBJ_NR; OM_FRAM_SCEN_DISPLAY: OM_OBJIM_SCEN_DISPLAY: OM_TABTYPE_DISPLAY. You'll notice once you add these parameters, you can see the technical names of the scenarios you're working with in PPOME/PPOCE.
Good luck,
Sharon

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add new fields to picklist of search criteria for opportunities

Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
Vijay

Dear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new time char of IC to multiprovider

Similar Messages

Maybe you are looking for