How to add NI-VISA Configuration Support to list of additional installers

I recently changed computers and now I am trying to use an installer that I made with the old computer, but one of the additional installers I had selected was the NI-VISA Configuration Support.  How do get that installed to my new computer so it will available in the list of additional installers?

if it's not in your 'old' installer then you did not include it in the build.
You will have to download the correct version from NI ... this is the link for the 5.4 
http://www.ni.com/download/ni-visa-run-time-engine-5.4/4231/en/
There is a good chance if you install the latest NI VISA your program will run again!

Similar Messages

  • How to add a new printer into printer list?

    Dear all,
    May I know how to add new printer into my printer list in SAP system? My company SAP is SAP 4.0B. Can any one please teach me how to add printer step-by-step?
    Thanks alot!!
    PC

    Solved

  • How to Add Serial I/O Support

    hi  all
     i have created one application in vb.net using LabVIEW Dlls in which i am performing Serial I/O operation
    now when i install that application on other PC LabView Dll Does not Respond
    now how can i add serial i/o support or how can i install serial i/o support indepandently with my Application ?????

    Dennis Knutson wrote:
    Serial I/O in
    LabVIEW uses VISA and you must have VISA run-time installed as well as
    the LabVIEW run-time engine. When you create an installer, there is an
    option to include serial only support which is smaller than the entire
    VISA run-time.
    If you are working with LabVIEW 8 you will no longer see the option to
    include serial only support.  You will need to install the full
    VISA Runtime.  It sounds to me that you are distributing a DLL
    with your VB application, in which case you will just need to install
    both Runtimes individually.
    -tuba

  • How to add a Field to the Result List in Activity

    Hello Experts !
    We are on CRM 7.0. I want to add a field to the Result List of Activity (Component: BT126S_APPT / View: ApptSR). This field is the address of the "Employee Responsible".
    So, how can I add a field to the Result List? AET is not a relevant tool for us because we don't want to create an attribute it already exist in the BOL. We just have to enhance the result list with BOL existing attributes.
    Also, after I add the field, I will need to populate my field with Data via some method.
    Thanks in Advance to all !
    Mariano.-
    SAP.

    Hi Mariano,
    The component was missing some technical data. Implement sap notes 1226612, 1363752, and then follow the manual procedure shown below.
    u2022     Execute transaction SE11.
    u2022     Choose the Radio button "Data Type" and enter value
                  "CRMST_QUERY_R_ACT_BTIL" in the Data Type field.
    u2022     Click on "Change" button.
    u2022     Position the cursor before the Includes added to this structure. Click
                 On the "+" button to add a new attribute.
    u2022     Enter the following details in the newly added blank row.
         Component: PERSON_RESP_LIST
         Component Type: CRMT_PERSON_RESP_LIST.
    u2022     Save the changes and activate the structure.
    u2022     Add the "Employee Responsible" field to the View configuration.
    u2022     Open the BSP application BT126S_APPT.
    u2022     Double-click on the view BT126S_APPT/ApptSR in the left side panel.
    u2022     Choose tab "Configuration" in right side panel.
    u2022     Choose the right configuration by using the "Choose Configuration" button.
    u2022     Click on the Edit button.
    u2022     Add the "Employee Responsible" attribute from the "Available fields" list to "Displayed fields" list.
    u2022     Save the changes
    Regards
    Krishna

  • How to add new data element to field list

    Hi,
    I am implementing Succession Planning 3.0 SP1.
    To make new data element was successful.
    I want to use them as sort field, however I don't know how to add them to the list of fields with caption.
    (i.e. to setting Visualize>My Org Units>Sort Fields)
    If you know how to config data elements usw. Please advise.
    Best Regards,
    Hiroshi Takimoto

    Hi Hiroshi,
    There are 2 ways to do this, both involving some customization of the application.
    1) Extend your HR-OCI views (TMC_O_SUCC_T & TMC_O_SUCC_B for My Org Units and TMC_IN_REP_T_DT & TMC_IN_REP_B_DT) to include Short Name. You probalby want to seek help from an OM consultant if this is not your area of expertise.
    2) Create a linked data element that links together the existing data elements and a new data element which includes Short Name. Your new data element must have the name of the existing data elements or you should change the hierarchy configuration that uses these data elements. Beware that this can prove troublesome for the Position Hierarchy because of the "virtual root" that is created - sometimes the join does not work because of this.
    Best regards,
    Luke

  • Create Tabular Form wizard - how to add rows to Table / View Owner list?

    Create Tabular Form wizard asks to choose "Table / View Owner"
    How to add additional schemas/users to this "Table / View Owner" dropdown list?

    Next step:
    I tried to create 2nd application - and it sees and allows to select from schemas I added in previous step.
    Then I tried to add 1 more schema - and 2nd application can't see it...
    I create 3rd application and select 1st schema (assigned when workspace was created) - and it sees only this one schema
    I create 4th application and select another schema (added in previous steps) - and it sees 2 schemas from 4 assigned
    what is this?
    how to live with it?

  • How to add a calculated field in a list definition (schema.xml)?

    Hello,
    I'm currently trying to add a calculated field to a list definition (schema.xml).
    I have put the following code at the end of the schema.xml for the list I want to create. But when I deploy and activate the feature for the list, it doesn't appear in the list field.
    <Field ID="{EE20EC4B-4216-4259-A84F-C478CE42B70F}" Name="EC_EventsMgmt_CalculatedTime" StaticName="EC_EventsMgmt_CalculatedTime" Group="EC_EventsMgmt" Type="Calculated" DisplayName="Calculated Time" Required="TRUE" Hidden="FALSE" ReadOnly="FALSE" Format="DateTime"> <Formula>=DATE(2009,1,1)+TIME(EC_EventsMgmt_ScheduleHour,EC_EventsMgmt_ScheduleMinute,0)</Formula> <FieldRefs> <FieldRef Name="EC_EventsMgmt_ScheduleHour"/> <FieldRef Name="EC_EventsMgmt_ScheduleMinute"/> </FieldRefs> </Field>
    Could you please give me some help and explain me why it is not working?
    Thanks a lot.

    Hi there.
    If I understand correctly, you create this list within the same feature?
    If so, the list isn't available during the propagation, and therefore the calculated field can't be added.
    If this is the case, then you could work around this by adding a feature activated event handler to your feature and add the calculated field programmatically in that event.
    Hope this helps.
    Regards,
    Magnus
    My blog: InsomniacGeek.com

  • How to add a button on the ALV LIST pop up

    Hi ,
    Can any one help me to add a button on the ALV list which is a pop up using ABAP Objects.
    Thanks in advance.
    Regards,
    Kavya.

    HI ,
    I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
    I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list  but still I am unable to get any additional button on the output ALV popup.
    Please help.
    Regards,
    Kavya.

  • NI-VISA does not appear in the addition installers window

    Its seems that i cannot add any NI-VISA packages to my "additional installers" window.
    The dev system has VISA 4.0 and LV 8.0 and even after downloading and installing the VISA runtime especially to fix this problem, i still cannot see it in the list!!! There also seems to be lots more missing from what i have seen in screenshots on previous posts. Why oh why is this happening!
    Alex.
    :. LV2010 SP1 ... W7 .:

    Thanks for your reply! It seems to have worked a treat!
    I did the following steps:
    1. uninstalled VISA 4.0 and DAQmx 8.x
    2. installed DAQmx 8.6 (i wanted to upgrade to this a some point anyway)
    3. installed VISA 4.2
    I can now open the Installer Properties => Additional Installers window and have the following options:
    and now that i can select the Measurement and Automation Explorer it has solved a second issue for me that i posted on this forum (see:
    Problems with building and installer - hardware config). An error used to occur when i tried to include the "Hardware Configuration from MAX" but there are no errors now. Im sure it has something to do with also including the MAX in your installer. See Below:
    Happy days for a monday
    Message Edited by ali66b on 11-19-2007 11:21 AM
    :. LV2010 SP1 ... W7 .:

  • How to Add New Domain To Available Domans List Under General Parameters

    On the SMTP Inbound Server configuration page how does one add a domain to the list of local available domains? It appears to only give me a choice of my current domain and then a "com" domain.

    Specifically to the question, you'd need to create a new domain from the traffic_cop Administration tab. I suspect though that there is a hidden implied need in your question - why do you want to add another domain to this list?

  • How to add elements into Object[][] type of list, in runtime?

    I have Object list, ie.
        final Object[][] data = {
            {"January",   new Integer(150) },
            {"February",  new Integer(500) },
            {"March",     new Integer(54)  },
            {"April",     new Integer(-50) }
        };How can I dynamicly add new elements in it, at the runtime?
    Thank you in advance!

    Do I have to remove 'final' for that, and then add
    elements?
    No. you can't change an array's size.
    You can do this
    Object[][] arr = new Object[numRows][numCols];But once you've created it, its size can't change.*
    I don't know what you're doing, though, and what actual data you're putting in, but Object[][] holding rows of [String, Integer] is almost certainly a poor data structure. Think about creating a class the represents one "row" here and then create a 1D array of that class.
    * Okay, you can kinda sorta effectively "change" the size of second and subsequent dimensions, since a multidimensional array is an array of arrays. I wouldn't recommend it though: int[][] arr = new int[3][2]; // a 3 x 2 rectangular array of int--it's  an array of array of int, with 3 "rows", each of which is an array of int with 2 elements.
    arr[0] = new int[10]; // now it's a jagged array whose first row has 10 elments instead of 2Here we haven't changed an array's size, just replaced one of its elements, which is also an array, with a new, larger array.

  • How to add a blank entr in dropdown list...??

    Hi all,
    I want to add a blank entry along with the datas into a drop down list for some purpose.
    Can anyone please sugeest how to do this task.
    Thanks in advance,
    Sekhar

    Hi,
    I think the blank value in a filter is same as showing All, and not only the rows which has value blank. Nevertheless both can be achieved as below.
    "Blank Value to show everything in Table as if no filter provided"
    value-key = '*'.
    value-value = 'All'.             " This will show up the text as All and work as if no filter is given and it will show all.
    APPEND value to set.
    "Blank Value to show the rows which has the value as space"
    value-key = space.
    value-value = 'None'.             " This will show up the text as None and work as if filter is given to show value as space
    APPEND value to set.
    Hope this help!
    Regards
    Vineet

  • How to add contact in my email contact list ini-pad mini ?

    How do I add contact in email contact list on my iPad mini ?

    Add the contact to the address book you sync with, then sync.

  • How to add an item  in the combobox list at runtime

    i want to add an item to the list of items in the combobox. How can I do this? I tried to use the methods getselecteditem() and getitem() from the actionlistener but no success.
    so after i add an item, the next time when i run that frame, that item should be displayed in the list of items in the combobox. Can anybody help me with this?

    Thanks Encephalophathic.
    Let me explain you the whole design -
    I have a frame having textfields and comboboxes. Now in the combobox, i have added some fields during design time and some i want the user to add at runtime. After the user clicks the Save button, i want the new string if entered in the combobox by the user at runtime to be added in the list of items of the combobox. So the next time when that frame is run, the item added by the user at runtime previously should be there in the list of items displayed in the combobox.
    What I am trying to do in this code at the combobox is if the user enters a new string in the combobox, then if he presses enter key, the value entered in the list of the combobox should be entered in the list of items of the combobox. Actually i m just trying to get the item typed in by the user, so just testing with enter key, but really i want it on the button click. I tried to add the code for adding an item to the combobox in the actionperformed, but i m not able to add it so confused what to do. Please help me with this.
    Here's the whole code for that -
    import java.awt.BorderLayout;
    import java.awt.FlowLayout;
    import java.awt.GridLayout;
    import java.awt.event.ActionEvent;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.BorderFactory;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import javax.swing.JTextField;
    import javax.swing.JMenu;
    import javax.swing.JMenuBar;
    import javax.swing.JMenuItem;
    import javax.swing.JCheckBoxMenuItem;
    import javax.swing.JComboBox;
    import java.awt.event.ActionListener;
    import javax.swing.JOptionPane;
    import javax.swing.JDialog.*;
    import javax.swing.JComboBox;
    public  class EnterFD implements ActionListener{
      private JFrame frame;
       private JPanel mainpanel,menupanel,userinputpanel,buttonpanel;
       private JMenuBar menubar;
       private JMenu menu,submenu;
       private JMenuItem menuitem;
       private JCheckBoxMenuItem cbmenuitem;
       private JLabel fdnumber;
       private JLabel bankname;
       private JLabel beneficiaryname;
       private JLabel entereddate;
       private JLabel maturitydate;
       private JLabel rateofinterest;
       private JLabel amount;
       private JLabel maturityamount;
       private JTextField fdnumbertxtfield;
       private JComboBox banknamecombobox;
       private JTextField beneficiarynametxtfield;
       private JComboBox entereddatecombobox;
       private JComboBox maturitydatecombobox;
       private JTextField rateofinteresttxtfield;
       private JTextField amounttxtfield;
       private JTextField maturityamounttxtfield;
       private JButton savebutton;
       private JButton clearbutton;
    public EnterFD() {
            initComponents();}
        private final void initComponents(){
            fdnumber = new JLabel("FD Number:");
            bankname = new JLabel("Bank Name:");
            beneficiaryname = new JLabel("Beneficiary Name:");
            entereddate = new JLabel("Entered Date:");
            maturitydate = new JLabel("Maturity Date:");
            rateofinterest = new JLabel("Rate Of Interest:");
            amount = new JLabel("Amount:");
            maturityamount = new JLabel("Maturity Amount:");
            fdnumbertxtfield = new JTextField();
            banknamecombobox = new JComboBox();
            banknamecombobox.addItem("State Bank Of India");
            banknamecombobox.addItem("Bank Of Baroda");
            banknamecombobox.addItem("IDBI Bank");
            banknamecombobox.addItem("ICICI Bank");
            banknamecombobox.addItem("Punjab National Bank");
            banknamecombobox.setEditable(true);
            banknamecombobox.setSelectedIndex(-1);
            banknamecombobox.addKeyListener(new java.awt.event.KeyAdapter() {
                @Override
                public void keyTyped(java.awt.event.KeyEvent evt) {
                    banknamecomboboxKeyTyped(evt);
            banknamecombobox.addKeyListener(new java.awt.event.KeyAdapter() {
                @Override
                public void keyReleased(java.awt.event.KeyEvent evt) {
                    banknamecomboboxKeyReleased(evt);
            beneficiarynametxtfield = new JTextField();
            entereddatecombobox = new JComboBox();
            maturitydatecombobox = new JComboBox();
            rateofinteresttxtfield = new JTextField();
            amounttxtfield = new JTextField();
            maturityamounttxtfield = new JTextField();
            menubar = new JMenuBar();
             menu = new JMenu("File");
             menubar.add(menu);
             menuitem = new JMenuItem("New");
             menu.add(menuitem);
             menuitem.addActionListener(this);
             menuitem = new JMenuItem("Save");
             menu.add(menuitem);
             menuitem.addActionListener(this);
             menuitem = new JMenuItem("Close");
             menu.add(menuitem);
             menuitem.addActionListener(this);
             menuitem = new JMenuItem("Exit");
             menu.add(menuitem);
             menuitem.addActionListener(this);
             menu = new JMenu("Edit");
             menubar.add(menu);
             menuitem = new JMenuItem("View FD");
             menu.add(menuitem);
             menuitem.addActionListener(this);
            mainpanel = new JPanel(new BorderLayout());
            menupanel = new JPanel(new BorderLayout());
            menupanel.add(menubar);
             userinputpanel = new JPanel(new GridLayout(8,2,5,20));
            userinputpanel.setBorder(BorderFactory.createEmptyBorder(50,50,80,80));
            userinputpanel.add(fdnumber);
            userinputpanel.add(fdnumbertxtfield);
            fdnumbertxtfield.setColumns(50);
            userinputpanel.add(bankname);
            userinputpanel.add(banknamecombobox);
            userinputpanel.add(beneficiaryname);
            userinputpanel.add(beneficiarynametxtfield);
            beneficiarynametxtfield.setColumns(50);
            userinputpanel.add(rateofinterest);
            userinputpanel.add(rateofinteresttxtfield);
            rateofinteresttxtfield.setColumns(50);
            userinputpanel.add(amount);
            userinputpanel.add(amounttxtfield);
            amounttxtfield.setColumns(50);
            userinputpanel.add(maturityamount);
            userinputpanel.add(maturityamounttxtfield);
            maturityamounttxtfield.setColumns(50);
            savebutton = new JButton("Save");
            clearbutton = new JButton("Clear");
            JPanel buttonpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
            buttonpanel.add(savebutton);
            buttonpanel.add(clearbutton);
            savebutton.addActionListener(this);
            clearbutton.addActionListener(this);
            mainpanel.add(menupanel,BorderLayout.NORTH);
            mainpanel.add(userinputpanel,BorderLayout.CENTER);
            mainpanel.add(buttonpanel,BorderLayout.SOUTH);
            frame = new JFrame("Enter FD");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setSize(3000,3000);
            frame.setContentPane(mainpanel);
            frame.pack();
            frame.setVisible(true); }

  • How to add application in Background app refresh list

    Hello, how can I add another application (for example Skype) in the list of Background app refresh? I have just 5 applications there. Is it even possible to add some more in this list? Thank You in advance for Your reply.

    I don't think you can. I believe apps have to be written to take advantage of background app refresh. Your best bet would be to contact the developer.

Maybe you are looking for