How to add object back to transport request?

I deleted a function module from a workbench transport request.  Now, I would like to add it back to this transport request.  How can I do this?  When I go to the include objects on the transport organizer, I do not see an option for selection function modules to be added back.
Thanks,
Ram.

Hi Ram,
Object status locked means that the same object can not be added in another request.
The objects will be locked automatically when change/ create a object.
But in your case since you have manually added the object in TR, so you have lock to manually.
For that In SE10 itself select the request and goto request/task>object list> Lock.
It will lock the object.
Hope this helps you.
Thanks,
Arun

Similar Messages

  • How to unlock objects in a transport request

    Hi, can you help me? I don't know how to unlock objects during a transport request. At the moment I have to unlock them one by one manually. I'm looking for a way to do it automatically.
    Thanks..

    Hi Bay,
    goto SE03,on the right side drill down Requests//task
    double click on unlock objects>give your transports request>execute
    Hope this helps
    Regards,
    Venkatesh

  • How to move objects from one transport request to another transport request

    Hi Experts,
        When I am changing the code I selected the wrong the transport request number. I want to move my objects into another transport request number in the same DEV and same client number. Could you please help to move these objects between the transport request numbers.
    Thanks,
    Chinna.

    Hi Chinna,
    If you need to change a transport request number, you can use TCODE SE80
    Click on Repository Browser tab
    Then Select the Object(s) you want to change the Transport Request number
    Right Click > Other Functions > Write Transport Entry
    After that you will need to specify other existing Transport Request number OR create a new transport request number (F8).
    Hope this is what you are looking for.
    Thanks
    Rohan

  • How to add config changes in Transport Request

    Hi Experts,
    We did some config changes in Logistics - General=>Material Master=>Configuring the Material Master=>Define structure of Data screen for screen sequence / Assign Secondary sequence / Maintain Order of Main and Additional Screens.
    But while saving this config of  Assign Secondary sequence / Maintain Order of Main and Additional Screens its not asking for Transport Request.
    Even i checked in the menu of EDIT-Tranport entries, but the menu's are in disable mode.
    Can anyone guide me how to add this two fields config changes in to TR?
    Thanks and regards,
    Anandhan

    Hi,
    This is really strage.
    However you can try the following.
    upon entering the config node, use the first menu option in which option "transport" would be there.
    Upon clicking it, the same table opens in display mode.
    Select the entries that you have created and use the option "include in transport"
    When asked for, provide teh transport number.
    Alternatively you can create a transport and them use SE10 to include entries from tables that you can select.
    ou may need teh help of an experinced ABAPer or Basis to do it if you are not confortable doing it yourself.
    However if the config effects multiple tables, then this is not a viable option as you need to know all the impacted tables.
    hope this helps.

  • To revert back a transport request from prd to dev server

    hi experts
        how to revert back a transport request from prd server to
        dev server?
        a transport request has been wrongly transported
        and it has make major changes in production server,
       now  we want to revert back that request , we know the   request no.
    regards
    pankaj

    All you have to do is create an order of transport type "Transport of copies" in PRO.
    I give you the steps to follow:
    1. Go to SE01 and create a new order (remember the type "Transport of copies").
    2. Enter the data of the order of transport that is going to come back.
    3. Enter the target, here is where you asign the target system to carry the request.
    4. Now just add the number of request to the new request you just created.
    5. Finally released the request from this transaction.
    6. Check on the queue of transport in DES, the request must appear there.
    I hope you serve =)

  • To add infospoke to a Transport request!

    Hi,
    I had created a new infospoke and would like to add this Infospoke to the transport request!
    but unlike other objects in BW, for which u can add or make a new transport request with extras option in menu bar!
    But for infospoke there is no such option!
    Can any one tell me how can i add infospoke to a transport request
    Raj

    Hello Bob,
    i did changed mmany times the infospoke definition!
    Everytime it gets activated but i wonder where that has been included in transport request!
    we have system where all the objects will have a local when you first save or activate the objects!
    when you change the package of the object then only it asks for transport request!
    i am sure my infospoke is stroed as a local package but do not know how to change and include in a transport request
    Raj

  • How can i create a new transport request?

    Dear Experts,
    Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
    Wilson

    Hi,
    Please let us know about the issue when you create the new Transport request .
    In which system you are creating the request . Hope its in Development  .
    If so , check the entries are enabled in SCC4 > Changes without automatic recording
    Changes to repository objects and cross client customizing allowed .
    Protection level 0
    If these entries are enabled, you must be able to create Transport requests.
    Please check and update .
    Regards,
    Nibu

  • Import back the transport request to Development Server

    Hi All,
    I need to import back the Transport request which is in Quality Server to Development Server.
    For ex: DEV900764  from Quality to Development Server.
    But the same(DEV900764 ) transport request is available in Development also.
    How to overwrite the transport request which in Development server ?
    I deleted  the request in se01, stms  in DEV server.
    Once i updated the copy of Quality to Development in co-file,data file in OS level. But still it show the old one(DEV copy) while importing thro' stms in development server.
    How to solve this ?
    actually i need the data of quality transport request

    Hi Milan,
    Even though you have deleted the request in Development system and later copy the co-file and data file from Quality to Development it will be the same. What is the reason of transporting from Quality to Development.
    Normally requests will move from Development to Quality and to production as you already know. Once the request is released from development and transported to next systems that request will have same data in the request what it was at the time it was released and whenever you re-transport that request it will have same changes.
    Why you want to do from Quality to development. If you find any differences in the changes of quality and development then some one might have done the chages directly in quailty with client being opened. If it is the same case then you need to take care of the system and avoid any direct changes. If as per my assumption if really there is any difference then make the  necessary changes directly in development instead of wanting to transport from Quality.
    Transporting from Quality to development is not good practise.....
    Regards,
    Sharath

  • Hwo can I insert objects in a transport request automaticly

    Hi all,
    I coded a program which changes some objects descriptions, it's working fine. But the problem is that I can't transport these modifications to another system without putting the objects in a transport request.
    So, How can I code that?
    Can some one give me a detailed example
    Thank you in advance.
    Amine

    Hi Michael,
    Thank you for your answer, but can you give me more details about these FMs.
    A sample code will be perfect
    Regards,
    Amine

  • Delete all inactive objects in a Transport Request

    Hi,
    I want to delete all the inactive objects in a transport Request . How can i do this ? I have many inactive objects in a request so i want to delete them first and then transport it . How can i do this . Please help..

    Hi,
      go to transaction se10 click on display individually enter teh request and click display and then you would get the list of all objects in that request so you can check which one are inactive and delete.
    Or you can also go to se80 in the repository browser you can choose inactive objects so it would show all inactive objects for a user from there also you can delete objects.
    Regards,
    Himanshu

  • How to Create BC SET using Transport Request

    Hi,
    How to Create BC SET using Transport Request.if any one knows help me

    Hi Gowri,
    The below given description might help u out ..
    You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
    This Customizing request is a change request with which you can copy and transport the changed system settings.
    The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
    You can subsequently edit BC Sets created from transport requests.
    Procedure
    Enter the Customizing request number and Continue.
    -> You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
    -> You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
    ->The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
    ·        green traffic light: The transport object can be put in the BC Set.
    ·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
    ·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
    ·        Cancel: The transport object cannot be interpreted or put in the BC Set.
    You can get detail information about the object at the bottom of the screen, by double-clicking on a row. For detailed information about messages, choose the icon in the Documentation column.
    The Activity column indicates the associated IMG activity. If no unique assignment is possible, the field is empty. To assign an activity or change an existing assignment, choose the Change Activity icon. Position the cursor on the IMG activity to which you want to assign the object, and choose Select.
    When you have made your choice, choose the Save Data from Transport Request icon.
    Make the necessary entries in the following dialog box Create Object Directory Entry. Choose Save.
    To create the BC Set with the selected rows, choose Save.  
    When you read the transport request, the data records are initially only read in the logon language. When you save the BC Set, all languages in the system are also put in the BC Set.
    You can edit the BC Set manually at any time. Proceed as described in Change BC Set.
    Reward if helpful.
    Thankyou,
    Regards.

  • Changing smartform from local object to a transport request

    Hi ,
          Can any one please let me know how to change  smartform from local object to a transport request.
    Regards,
    Ashok kumar

    Hi,
    GOTO transaction SMARTFORMS.
    Enter the name of the smartform.
    Then GOTO -> OBJECT DIRECTORY ENTRY.
    There give ur package then it will ask for the request.
    Then create the request.
    Hope it helps u.
    Regards,
    KK

  • All the table objects in one transport request..?

    Hi Friends,
    I do have more than 10 tables and each table is having more than 30 fields.
    All these Tables, Data elements and Domains are created by me.... means name start with 'Z'.
    My task is i need to save all these objects in one transport request number.
    How can I do that...?
    All the eariler transports are released to higher system....
    As of my knowledge, going to each table & data element and domain... changing some text and then it will ask for new requestr and saving....
    Can i do that in a single step for table and its fields (DEs Domains).
    Thanks,
    Naveen.I

    Hello Naveen,
    In SE03 transaction ,execute the merge object list. ( if u are not authorized to SE03. Goto SE10 transaction and click the transport organizer tool in the tool bar (shift+F6))
    Input all the transport request  you want to merge and select the release check button ( as you says that your transport requests are already released ). and the execute and click the merger button in the top left corner. it will be asking new transport request. Create a new workbench request. finally  you will be getting the popup message. select any option as ur convenient ( either online or background). then all the development you have done in different transport request will merge into one TR.
    Hopes this will helps
    Regards
    Laxman

  • Log for Addition/Deletion of object in a Transport Request

    Dear Friends,
    Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
    But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport.  The reason for the same could be :
    1.) Either the object was not deleted from the transport request.
    2.) Or Some one else added the same object again in the request.
    I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
    Is this possible ? If so kindly share the steps with me.
    Thanks a Lot for your kind help!!! This is very important for me....
    Regards,
    Lalit

    Hello Lalit
    I hope nothing of that sort is available as the transport requests will again have tasks under them.
    The changes done to  the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
    All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
    You get an action log which provides who created it and who releaed them.
    But if you configure CharM on Solution manager I hope you can track each changes.
    Regards
    Vivek

  • Issue in BI Objects collection into Transport Request

    Hi Experts
    I am experincing a Issue in collecting Infocube and related objects into a transport requests using transport connection.
    My Scenario is as explained below
    1.Migrated 3.x Dataflow into BI 7.0 Dataflow
    2.Dataflow consists Infocube -->DSO (two separate DSO) --> Infosource (only 1) --> Datasource (from 2 different Source systems)
    I have manually captured all my objects into a transport requests. i.e while activation.
    The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
    I am getting the below mentioned error.
    Object '4C3C4WGBCRK9UWKNDGGYNKDNA' (ROUT) of type 'Routine' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '4C3C4WGBCRK9UWKNDGGYNKDNA' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.
    I am sure that all my objects are collected into transport requests & I checked the object entry of all the dataflow objects..
    Appreciate your valuable inputs on this.
    Thank you in advance
    PKC

    In that case, pls ignore my prevoius post...
    The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
    With this option, system should have collected the related routines. Did u expand routine node, and check (ON) the check box for that routine ???
    (Once all objects got collected,  now from the right most window, expand each node (application, infoarea, routines etc) and put checkbox 'ON' (checked) to ONLY the objects (routine 4C3C4WGBCRK9UWKNDGGYNKDNA' ) u want to transport. Once u r done with that, click on Transport (truck Icon) and enter package name, if system prompts.)

Maybe you are looking for

  • How to parse the output of a JSP?

    Hi, I need to parse the generated contents of a JSP file from within the web application (i.e. another JSP). Any ideas how this might work? It seems that XPath will not parse a file which doesn't end in .xml, and even if it did, I get the feeling it

  • Would like to change my security questions and answers on my Apple ID account??

    I would like to Change my Security questions and Answers on my Apple ID account?? I have tried and have successfully reset my PW but I have forgot my answers to questions!! HELP Please!

  • What is the diff of Solution monitoring and E2E Root cause analysis

    Hi, I want to know what is the different for Solution Manager Solution Monitoring and End to End root cause analysis. Currently we have implemented change management and Implementing and Upgrading SAP Solutions, if i would like to explore the solutio

  • How do I remove the file name extension form a 'file name' cross reference?

    I have a cross reference which is refeencing another InDesign file using the cross reference format 'file name', however it includes the file extension. Is there a way to have this extension not display? Maybe a delimiter or perhaps a differnt format

  • Library Will Not Populate - Please Help

    I have a lot of music in my My Documents\My Music\iTunes\iTunes Music Folder. The iTunes preferences are set to point to that folder. When I open iTunes, however, none of the songs ever appear. If I have tried to recreate my library using this guide,