How to add Objects to transport request through FM/BAPI?

Hi All,
I am creating a workbench request through program. I am able to create it by using BAPI but i am unable to add objects to it through program.
Can anybody tell me the funcion module/bapi to add object to transport request?
i have the list of objects that are suppose to be added.
No BDC please.
Thanks ,
Swarup

Hi Swarup,
Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
Thanks
Lakshman

Similar Messages

Ho to programmaticaly add objects to Transport Request

Hi Experts,
I have a requirement programmatically add objects to a Transport request.
My requirement is , to modify/delete entries from DB table in the program and to create that object under a Transport request. I could successfully add objects while creating entries to the DB table. I have some confusion when I'm to delete entries in the DB table. How am I to achieve this. Is there some delete key/flag in the transport request which indicates that the entry is for deletion in the table.? When the TR is SAP craeted, both the creation and deletion TR appears the same.
I'm using FM 'TR_REQUEST_CHOICE' to add the objects.
Thanks in advance ,
Regards,
Anjali

Thanks Neenu, My problem is not in adding objects to a TR.
Suppose I have a Config table, which I want to maintain by the use of an program. With this program I should be able to create and delete entries in the config table. Now While creation, i face no problem or confusion in adding the tasks to the Transport request. But if I'm to delete entries from the config table and maintain it in the transport request, how shall i do it? The TRs which SAP creates for addition of entries and deletion of entries appears same. I cannot spot any differnce in the tasks while creation of entries and deletion of entries from the DB table.

How to copy object from transport request to another transport request

Hi All,
Can some body tell me how to copy the objects which are there in on transprot request to another transprot request ? I think we can do this from the transction SE09 but I am not getting how to do this.
Thanks&Regards
Mahesh

Hi,
step 1.Go to se10, give your user id and clik display.
step 2.There will be list of transport requests, go the respective request and point
the cursor on the object under that request and click on delete button.
step 3. Assign new request to the objects deleted.you can do this by activating all the objects once again.
Regards,
santhosh

How to delete objects in transport request

Hi,
I have several different questions in Transport requests and need advice:
1. I need to transport an Infoobject and I chose only necessary objects in grouping and I don't see any app components in the request before created, but in SE01, under the request id I see app components and infoareas listed. A bunch of them, which I don't need to transport. Why this happens?
2. I want to know if there is a way to delete all the app comps in one shot from the request before it is released?
Thanks.

U might have selected 'Collect automatically"
I suggest u, to delete complete request ( first unlock it in SE03... then delete it from SE09)
Recollect that InfoObject in a new request, by selecting only necessary object & Collect manually
In this way u will have less confusion

Add bunch of transport requests at a time

Hi Friends,
How to add bunch of transport requests at a time to import buffer using tp tool at OS level on windows?
Any help would be appreciated
Thanks

Hi Jawed,
It's depends on the script which you are using. Try to copy in excel and pase in the dos > prompt. This may help you.
Regards,
Hari.

How to delete bulk of objects from transport request?

Hi
I made some mistake in selecting the objects for transport, and now there are a lot of unwanted objects saved under the request number. I know the objects can be deleted from the transport request through SE01, SE09 and SE10. But none of these allows me to delete the request number because there are a objects under the request that has to be deleted first.
Is there any way by which i can delete the entire list of objects in one go rather than deleting them one by one?
Thanx
Sujai

Hi,
You have to Unlock the request before you deleting the request.
Goto SE03->Under Requests/Tasks Double Click on Unlock Objects (Expert Tool)-> enter the Request no you want to Delete and Click on Execute -. Click on Unlock.Now you can Delete that Request.
-Vijay

Error in transporting request through charms

Dear Experts ,
recently refreshed my quality systems data with production data ..and finished successfully, but we did not take any screenshots before doing refresh in quality
my problem is we already configured charms in solution manager to transport requests to production system ...
now we are not able to transport request through charms .. because rfc connections are changed in quality ...
please let me how can i recollect quality rfc connections for charms ...
i dont have idea about charms configuration to reconfigure in quality.... please help in this
Regards

Hi,
You need to transport the ODS 1st and then the transformation.
The main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
          u2022The Infobjects should be transported first in a separate request.
          u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
           u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
hope this helps.
Regards,
Mahesh

Package objects and transport request

Hi Gurus,
How to find out the transport request which are generated by an object created?
I have a package(ex:xyz) which has got an object (abc).Now i need to find the transport request which are related to this object abc?
Please tell me the procdure or the Tcode to out the same.
Regards,
Prasad

hi,
SE09 is the transaction code for workbench organiser.Workbench organiser is the set of utilities for development change management.All Development changes are tracked via Workbench organiser.
SE10 is for Customosing organiser.Customising organiser is the set of tools for customising change management.All customizing changes are tracked via customising organiser.
thnks,
raji.

Collecting objects in transport request

HI Experts,
                My development is completed and now i have to collect the objects in transport request. my development is like
1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
2)Infopackeage for Datasource
3)DSO
4) Infocube
5)multiprovider
6)queries and views
7)web templates
This is the first time I am collecting this many objects. So please give sugessions how to collect these objects in a single transport request.
Thanks and Regards,
RAJ

It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
1) collect all the InfoObjects
2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
3) collect datasources/Infosources (they need Infoobjects.. so they are dependent on 1)
4) collect transformation (they need 2 and 3)
5) collect DTPs and InfoPackages   (they need 3, 4)
6) collect the reports
7) collect the web templates
make sure these are transported in sequence... each on dependent on previous

How to delete items in transport request

How to delete items in transport request. I have quite a lot data to be deleted.
I click on TR5001. Then click to drill down to Table contents
   C001
            Data A1
            Data A2
            Data B1
            Data B2
Placed my cursor on Data A1 and tried deleting Data A1 by clicking on the item and right click then select delete but not able to delete with message "Message no. TK705, A request, task or object could not be deleted because the cursor was not positioned correctly". .
Any clue to the error and any recommded solution?
I just need to transport Data A2, Data B1 & Data B2.
Regards
PSK

Hi There,
I dont have access to SAP as of now, Can you please reffer to these links and give feedback,
[cursor Page|http://books.google.co.in/books?id=ASekwAiAXdMC&pg=PA250&lpg=PA250&dq=Positionthecursoronarequest,task,orobjectSAPtransport&source=bl&ots=BS7c1uNH0z&sig=dQZNp7UuXvqyHT9-otTbip8iF8U&hl=en&ei=_NBESr7CDsmGkAXX8MmsDw&sa=X&oi=book_result&ct=result&resnum=1]
[SAP help|http://help.sap.com/saphelp_sm32/helpdata/EN/b6/b40613a44411d1846d0000e8a57770/content.htm]
Thanks,
Raja

Deleting objects in transport request

Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.

Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh.

Translation of objects at transport request

hi, can any one tell how every object can be translated at transport request based on Object Type and object name is there any way to do like that, its very urgent .
thnks,
Vassu.

hi, actually the requirement is that our production system would be multi lingual in future they want to change their qs-chech process. Every transport request we transport in to their test-systems must be checked, if all translatable objects are translated.
therefore they want a report, which does this automatically.
so they want to check every object at transport request is transaltable or not?
but we have some 10,000 of objects present i our development system.How can we check all those objects?
this is the senario.
Regards,
vaasu.

How to assign a new transport request for a program saved in $tmp mode

Hi all,
How to assign a new transport request for a program saved in $tmp mode?

Hi,
delete the object fro the package $tmp.
go to change mode, save it.
while saving it will ask for teransport id.
thanks
vinod

How to add invitees to an event through code?

How to add invitees to an event through code? Attendees property in EKCalendarItem is readonly, is there any way to do it?

Sorry by email only iCloud: Share a calendar with others

Approve critical objects in transport requests (ChaRM)

Hi folks!
When trying to create transport of copies from within a Change Document (status 'to be tested') the system checks for critical objects in transport requests and prompts a warning that critical objects are to be approved.
I do not want the Change Manager to approve every transport request containing critical objects. I would more likely use this feature as information for the Developer so he is aware of working on critical objects. The Developer should be able to make the approval.
What I found out: only the user whos Business Partner is assigned to Partner Function 'Change Manager" is allowed to make the approval.
More detailed it seems to be Partner Function of type "0008 responsible person"
I tried changing Partner Function Developer from "0016 service group" to "0008 responsible person" but the system won't let me have two Partner Functions of that type in one Change Document.
Any suggestions?
Thanks in advance.
/cheers

Hi,
For any user to approve the change req or change doc, he should have the authorization
In your case Developer has to approve means
1. Create a Action definition and maintain the processing parameters for the definition, select the partner fn as Developer
2. Create the customized status in your status profile and its corresponding Authorization code also.
3. Assign the Authorization code for Developer under teh authorization object B_USERSTAT
By this Developer wil get the authorization for approving the change doc for the particular status
If solves your query then mark the thread as answered
regards
Naveen

How to add Objects to transport request through FM/BAPI?

Similar Messages

Maybe you are looking for