How to add statiscal value in intrastat report for free of charge Pur Order

Hi Experts,
In Purchase Order if 'free of charge' check box is ticked then it wont allow us to have condition tab ( as there should not be any pricing for FOC) - SAP Standard functionality.
But since I want to report this purchase order in Intrastat report, I need to have some statiscal value for this purchase order.
Can somebody help me how I can add statistical Value to this PO in Intrastat Report ?
I have already tried following option :
1) I try to update through user exit but it is again coming as ZERO - Hence not allowing to update.
2) VEFU-  Manually update the records - Not possible to edit Stats/Invoice Value of PO - Hence ruled out.
3) Incompletion log - It is showing/ directing me to the PO in change mode but I cannot edit this as there is no condition tab - Hence not possible.
Can somebody help me ?
Thanks
Arpit

may be you can enetr it in PO header text and extract via z program

Similar Messages

  • How to add HEX values in a Report.

    I have a special requirement. I need to add hex values in a report. To be specific, the special HEX characters: 0D 0A 0C 0C, has to be added to TOP of PAGE event.
    Drawing What I want will be something like that:
    CR/LF FF/FFABCDEFHGIJKLMNOZVCXC 
    This is a Report that has to be send to the spool. Once in the spool will be converted to TXT file. I created a small code using print control function but still It is doesn’t working.
    I defined a print control ZPAGE as ‘0D 0A 0C 0C’.
    Any idea how to do this?.
    ** This report doesn’t include the Top-of Page event.
    ** Example Report.
    REPORT  ZCAPRTHEX2 NO STANDARD PAGE HEADING.
    Data: String1(120) type c value 'ABCDEFHGIJKLMNOZVCXC'.
    WRITE : /.
    PRINT-CONTROL FUNCTION 'ZPAGE'.
    WRITE : string1.
    This is what I see in SP01 as HEX View
    ABCDEFHGIJKLMNO ZVCXC #ZPAGE

    If you download spool to file like that, you are still getting the spool in SAP format, it's not going to have the hex chars. You need to print the file by clicking on printer button. SAP generates file in printer readable format and send it to printer. I'm refering to that file.
    Ask your basis folks to write the spool output reqest file to a file instead of sending to the printer. Open that file in hex viewer.
    Regards
    Sridhar

  • How to add search help to a report.

    How to add search help to a report.

    Hi
    It can use the event AT SELECTION-SCREEN ON VALUE REQUEST:
    PARAMETERS: P_FIELD LIKE ....
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FIELD.
    * Here it needs to insert the abap code to call the search help,
    * for example it can call fm F4IF_FIELD_VALUE_REQUEST
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
           EXPORTING
               TABNAME        = SPACE
                SEARCHHELP = <SEARCH HELP>
                DYNPPROG     = SY-REPID
                DYNPNR          = SY-DYNNR
                DYNPROFIELD = 'P_FIELD'.
    Max

  • How to add two columns in OBIEE report?

    Hi to All,
    Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
    Thanks in Advance,
    Thenmozhi

    Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
    For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
    Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
    Let me know if you are looking for something else.
    Thanks

  • Reg:HOw to add new charactersitics in standard report

    hi all
    HOw to add new charactersitics in standard report
    regards
    JK Rao

    You need to copy the std report and make necessary changes in the copied report. SAP does not allow changes to std report. The technical details of the report can be seen by selecting from the menu Extras - technical information. Select the library and Report name. Copy the same using t code GRR1. Carry out necessary changes and SAVE. Before execution, you will have to specify the report group in which report needs to be attached. You can choose and existing group or specify a new one.
    Regards
    Rakesh Pawaskar

  • How to pass the value from Sub report to main report

    I have un report(mainreport) within a subreport(subreport).
    With reporting services, how to pass the value from Sub report to main report?
    thanks

    Hi Alebet,
    With reporting services to pass values from sub report in to main report is not supported directly.
    But there are some workarounds through which you can get this .
    There are two ways to get this.
    1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
    2- Using this temporary tables data write some Scala function in the data base.
    3- Now in your main report query return this scala function as a column.
    4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
    This will definitely work fine as i have done some report in this way.
    Another way of doing is that
    1- prepare another data set with the same query as in sub report in the data tab.
    2- then refer this 2nd dataset in your main report .
    But better way will be the top one.
    Anyway please let me know if you get the solution.
    Thanks
    Mahasweta

  • In Scom,How to add CAC value in given MP (management pack)? Please give me in detail procedure with example if possible.

    In Scom,How to add CAC value in given MP (management pack)? Please give me in detail procedure with example if possible.

    Hi 
    CAC is System.ConsolidatorCondition condition detection module used to consolidate the monitoring i.e. you can generate an alert on multiple occurrence of issues instituted of generating single alert for issue.
    refer below link for more information
    http://msdn.microsoft.com/en-us/library/ee809324.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/20301.how-to-add-consolidation-for-url-monitoring-in-scom-20072012.aspx
    Regards
    sridhar v

  • How to add company logo in z report

    Hi !
    i want to know how to add company logo into custom report ...
    generally we used below mentioned code for sap logo
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY       = IT_LIST[]
       I_LOGO                   = 'ENJOYSAP_LOGO'.
    ENDFORM.            "top_of_page"
    what changes we need to do to add company logo into custom report
    Please guide
    Regards
    Sheetal

    First upload  ur  required logo in  SAp  by  t-code  SE78.
    Use teh  above mentioned  ALV code  for the same.
    Try  to  search  on SDN for  the  u can find the  full  ALV code for the same.
    ..lakhan

  • How to add field value to the standard table

    Hi,
    How to add field value to the standard table?
    for example:
    when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

    Hi Asif,
    I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
    If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
    Hope this is clear for u.
    Thanks,
    Vinod.

  • Crystal 2008 How to Add a stylesheet to a report?

    Crystal 2008 How to Add a stylesheet to a report?
    I have no idea where to start:
    - Dont know how to link css to report
    - Dont know how to format different fields etc
    Please help.

    Hello,
    Hit the F1 key in CR Designer and then search on StyleSheet and it will give you info on to.
    Thank you
    Don

  • How to add integer value of two buttons?

    how to add integer value of two buttons (any button) in VI and display it in output text box? i have attached example program, but i know its wrong.. please help
    Solved!
    Go to Solution.
    Attachments:
    add.vi ‏8 KB

    thanks for reply. i am trying to assign an integer value to a button and the button should send the assigned integer value to TCP/IP write, only when the button is pressed. i am able to send data using string control (as shown in the attachment) but i want to replace it with several buttons. for example, if i enter 2 in string control, this data will be sent to a robot (robot has wifi card)  through tcp/ip protocol, it moves front. 3 will make it to move back, 8 is left, 6 is right. this numeric data is already burnt into blackfin processor of the robot. so just by entering numbers in labview can make my robot move in specified direction. can you please help me to create a button with value and convert it into string and send it to tcp/ip write. this should happen only when the button is pressed. because, if i enter numbers in string control, it dosent looks good..... if i have buttons... i think my VI will look good and hitech.
    Attachments:
    robo.vi ‏9 KB

  • How to add two values

    How to add varchar values in oracle.Consider as both are time values.but the data type[both] is varchar and stroed in table
    For example:
    Column1 Column2
    2.40:10 PM 5:22:00
    i need the result for the following format
    8.02[8 hours and 2 minutes]

    with c as
    (select '2:40:10 PM' t1, '5:22:00 PM'  t2  from dual)
    select hr+level ||':'||to_char(mi - (level*60))||':'||sc Time from
        select  sum(h) hr,sum(m) mi, sum(s) sc from
            (select
                    substr(t1,1,instr(t1,':',1)-1) h, substr(t1,instr(t1,':',1)+1,instr(t1,':',2)) m, substr(t1,instr(t1,':',3)+1,instr(t1,':',3) - instr(t1,':',2)) s, substr(t1,-2) t
            from c
            union
            select
                    substr(t2,1,instr(t2,':',1)-1), substr(t2,instr(t2,':',1)+1,instr(t2,':',2)), substr(t2,instr(t2,':',3)+1,instr(t2,':',3) - instr(t2,':',2)), substr(t2,-2)
            from c
    connect by level<(mi-60)
    TIME
    8:2:10

  • Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

    Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
    Exemple:
    Table1
    Cliente name:
    John
    Client number:
    12345
    Survay number of negative answers:
    3
    Table2
    Questions and answers that were negative:
    Question: How much time where you waiting
    Avaluation: 3 (from 1 to 10)
    Answer: They only called me 1 mouth later
    Can you please help me?

    Hi,
    Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
    In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
    References:
    Subreports (Report Builder and SSRS)
    Add a Subreport and Parameters (Report Builder and SSRS)
    If I have any misunderstanding, please feel free to contact me.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Intrastat Report for UK

    Hello All
    I am trying to figure out the output format of intrastat report for UK. We have basic setting in place. However I wanted to know how the output format is configured. We are interested in creating a file rfom sap and uplaod it ion HMRC server.
    Can any body please help?
    Thanks
    Sanjeev

    The SAP declaration looks like it conforms to the old EDIFACT data standard u2013 its an international standard and it is accepted by HMRC.
    However to get the right output format you need to select the u201Cautomatically named fileu201D option on the final step of the declaration wizard and not the .csv format one ( the csv is for you to read or store or to check that it looks right - the EDIFACT docs are pretty unreadable to the human eye. CSV can also be used as the basis for input into third party submissions software such as Intrastat Data Entry Package (IDEP) but not for direct submission to HMRC. See the online help "CSV File and Intrastat-Relevant Fields" for more details.)
    The details from HRMC on how to submit EDIFACT format declarations by email can be found at
    http://www.businesslink.gov.uk/bdotg/action/detail?itemId=1081740270&r.l1=1079717544&r.l2=1087337125&r.l3=1079840863&r.l4=1081816952&r.l5=1081695786&r.s=sc&type=RESOURCES
    Tristan
    Clarification on .csv use
    Edited by: Tristan Hore on Jun 10, 2011 5:03 PM

  • How to add a new universe in population for Predictive Analysis

    Post Author: izhar
    CA Forum: Performance Management and Dashboards
    Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
    Any member please help me hereRegards Izhar

    Hi Anne,
    It really depends on how your portal is set up. And there are 101 ways this could have been done.
    I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
    The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
    As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
    Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
    Thanks,
    Chris

Maybe you are looking for