How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

Similar Messages

How to add the update statement in this procedure?

I have one table usersubscription (userid,newsletterid,deleted)
I got one string from user e.g. ('1,2,3') and userid = 14
I wrote proceduer that will insert this records in to usersubscription table;
userid     newsletterid     deleted
14     1          n
14     2          n
14     3          n
default value of deleted column is 'n'.
my procedure is as follows;
CREATE OR REPLACE PROCEDURE usersubscription_procd1 (vuserid in number, vnewsletterid IN VARCHAR2)
AS
I NUMBER;
J NUMBER;
VAL VARCHAR2(100);
BEGIN
     I := 1;
     J := 1;
     WHILE INSTR(vnewsletterid,',',I) != 0 LOOP
     VAL := SUBSTR(vnewsletterid,I,INSTR(vnewsletterid,',',I)-J);
     I := INSTR(vnewsletterid,',',I)+1;
     J := I;
     INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
     VALUES (usersubscription_seq.nextval,vuserid,VAL);
     END LOOP;
     VAL := SUBSTR(vnewsletterid,I,LENGTH(vnewsletterid));
     INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
     VALUES (usersubscription_seq.nextval,vuserid,VAL);
END;
Now one requirement is that when new string comes for same userid e.g.('1,4,5') userid = 14
then the deleted column for 1 and 2 newsletterid changes to 'y';
please tell me the solution.
Prathamesh.

Hi,
Before your loop, you can make something else like :
SQL> select * from test;
    USERID NEWSLETTERID D
        14            1 n
        14            2 n
        14            3 n
SQL> update test
2 set deleted = 'y'
3 where instr('1,4,5',newsletterid,1) = 0
4 and userid = 14;
2 ligne(s) mise(s) à jour.
SQL> select * from test;
    USERID NEWSLETTERID D
        14            1 n
        14            2 y
        14            3 y
SQL> HTH,
Nicolas.

How to add the BPM column in iTunes 12.01?

This used to be easily done under View Options but is gone now. Is it somewhere else now or has this feature been removed? THX!

It is still there! See picture below. Start at the upper right, choose Show Columns, and click for "Beats Per Minute."

How to add the delete statement in this procedure.

I got a string from user e.g. 1,2,3 and userid =14 from user;
I wrote a procedure that will insert the record as follows;
Userid newsletterid
14     1
14 2
14 3
The procedure is
CREATE OR REPLACE PROCEDURE usersubscription_procd (vuserid in number, vnewsletterid IN VARCHAR2)
AS
I NUMBER;
J NUMBER;
VAL VARCHAR2(100);
BEGIN
     I := 1;
     J := 1;
     WHILE INSTR(vnewsletterid,',',I) != 0 LOOP
     VAL := SUBSTR(vnewsletterid,I,INSTR(vnewsletterid,',',I)-J);
     I := INSTR(vnewsletterid,',',I)+1;
     J := I;
     INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
     VALUES (usersubscription_seq.nextval,vuserid,VAL);
     END LOOP;
     VAL := SUBSTR(vnewsletterid,I,LENGTH(vnewsletterid));
     INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
     VALUES (usersubscription_seq.nextval,vuserid,VAL);
END;
Now one requirement is that
When next string comes like 1,4 for same user
Then I want to delete the 2 and 3 and insert the 4 .
Please tell me solution.

Hi,
Try to delete all record from ther current user :
CREATE OR REPLACE PROCEDURE usersubscription_procd (vuserid in number, vnewsletterid IN VARCHAR2)
AS
I NUMBER;
J NUMBER;
VAL VARCHAR2(100);
BEGIN
     begin
          delete usersubscription where userid = vuserid;
     exception when others then null;
     end;
     I := 1;
     J := 1;
     WHILE INSTR(vnewsletterid,',',I) != 0 LOOP
          VAL := SUBSTR(vnewsletterid,I,INSTR(vnewsletterid,',',I)-J);
          I := INSTR(vnewsletterid,',',I)+1;
          J := I;
          INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
          VALUES (usersubscription_seq.nextval,vuserid,VAL);
     END LOOP;
     VAL := SUBSTR(vnewsletterid,I,LENGTH(vnewsletterid));
     INSERT INTO usersubscription (usersubcriptionid,userid,newsletterid)
     VALUES (usersubscription_seq.nextval,vuserid,VAL);
END;
/Nicolas.

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new column to a existing table and add data to this column?

I have a table with about 10 millions row and I want to add a new column to this table, then fill this new column with prepared data.
How to do it ?
Thank you

Can I use insert statement to add the data to new-added column?No.
07:19:37 oracle >create table test (x number);
Table created.
Elapsed: 00:00:03.05
07:19:53 oracle >
07:19:53 oracle >
07:19:53 oracle >insert into test values (1);
1 row created.
Elapsed: 00:00:00.00
07:20:01 oracle >insert into test values (2);
1 row created.
Elapsed: 00:00:00.00
07:20:10 oracle >insert into test values (3);
1 row created.
Elapsed: 00:00:00.00
07:20:12 oracle >
07:20:13 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:14 oracle >
07:20:19 oracle >select * from test;
         X
         1
         2
         3
Elapsed: 00:00:00.00
07:20:22 oracle >
07:20:36 oracle >alter table test add (y number);
Table altered.
Elapsed: 00:00:00.05
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >select * from test;
         X          Y
         1
         2
         3
Elapsed: 00:00:00.00
07:20:43 oracle >
07:20:44 oracle >
07:20:44 oracle >update test set y=1;
3 rows updated.
Elapsed: 00:00:00.02
07:20:52 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:56 oracle >select * from test;
         X          Y
         1          1
         2          1
         3          1
Elapsed: 00:00:00.00
07:20:58 oracle >Anand

Hi, I use two email addresses within one account with gmx. I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

Hi, I use two email addresses within one account with gmx.
I created one account with the first email address now. How do I add the second one to this account?
Now it looks like this.
One account was opened with address A.
I receive in this account emails for address A and B.
But I can only write and answer with address A.

Hi Rudegar,
Sorry for my late reply.
It s not the amount of accounts I'm struggling with.
When I create now for both email addresses one account, then I receive the same emails two times.
That is not what I want.
Because on gmx the two email addresses have the same inbox and outbox.
E.g. I can login to my gmx account either with email A or B. It doesn't matter.
Now I want to have the same on my ipad.
One account with both email addresses.

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add a formula column in a report

Hi
I have made a report based on a query.
There are 3 columns in the query and all the 3 are displayed.
Now I want to add a new column (fomula column) to the report.
I want to write a query inside the formula column. To execute the query col1, col2 and col3 values are required in the formula column.
Could you please tell me how to add a formula column in the report and how to pass database column value to inside the formula column
regards

Here is how you would create a formula column:
Open data model of the report.
Formula column button is on the left side of the tool palette.
Click on that button.
Now click in the query group where you want to place the formula column.
You would see a new field something like CF_1. That is the formula column.
Double click on the field CF_1. It will open property inspector.
You would see, Datatype of the formula column is Number. Change this as per your requirement.
Double click on PL/SQL Formula property. It would open up a editor. Here you can write the code.
And now to access the data model column here, you can use : and column name. i.e. :col1 or :col2, etc
And remember you have to return the value back to the formula column. Like this: RETURN(some value).
You can also take a help from here:
http://download.oracle.com/docs/html/B13895_01/orbr_howto.htm#sthref1309
Hope this helps.

How to populate the organization_code column in ST table for legacy system

Hi, dear all,
Now I use the stage table to load the setup&transaction collection data from a non-EBS legacy system to ASCP system.
My question is: how to populate the organization_code column in the stage table？If the source system is EBS system, maybe it's an inventory organization code. But for the non-EBS system, which value is need fo this field? keep it as blank? or assign some value for it?
Thanks
Edited by: 852938 on 2011-5-4 下午10:24

I find some words in the implementation guide, it says:"To collect data from your non-Oracle ERP systems or your trading partners' systems,you model each non-Oracle ERP system or trading partner as an Oracle Applications organization and store their setup and transaction data there".
But I can't find where to model the application organization for the legacy system.
anyone can give some clues? Thanks in advance.

How to add one date column and charecter column

hi all,
i have 3 column start_date(date),end_date( date),duration (varchar2)
i am trying to add start_time and duration like this
end_date := to_char(start_time) + duration;
but its showing value_error
how to add one date column and charecter column.
Thanks

you need something that does:
end_date (DATE) := start_date (DATE) + <number of
days> (NUMBER)Not necessarily, because if the duration is just a string representation of a number then it will be implicitly converted to a number and not cause an error
e.g.
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('01/07/2007','DD/MM/YYYY') as start_dt, '3' as duration_days from dual)
2 -- END OF TEST DATA
3 select start_dt + duration_days
4* from t
SQL> /
START_DT+
04-JUL-07

How to expand the hierarchy column automatically when delivery reports by a

Hi Experts,
In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
For example:
In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

958054 wrote:
Hi Dpka,
Is it any difference? I look at the result is same.
Firstly, you said it is 'Add member of ',
Now, you said it is 'Keep member of'
Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
•Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
•Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

How to add a new column to specific position

Hi,
How to add a new column to specified position in a existing table.
I have using the oracle database 10g.
This below code is not working in oracle 10 g
example:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER FIRST:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER AFTER JOB:
Please provide the correct syntax.

Hi,
When you add a column to the existing table, the column added i.e., for ex updatedon appers in the last. If you want the columns to be
displayed in Specific order. Just give the column names in the SELECT.. statement.
For your Information, But it is not good in Table design. Just to give something useful.
If you want to add a column at a specified position,
Rename the position column to the new column name
For Ex: (OLD_COLUMN_NAME-Hiredate)
ALTER TABLE EMP RENAME COLUMN OLD_COLUMN_NAME TO TEMP_HIREDATE;Add a New Column to Table
ALTER TABLE EMP ADD LAST_DATE DATE;Then, Alter the Table to rename the new column that is added.
ALTER TABLE EMP RENAME COLUMN LAST_DATE TO OLD_COLUMN_NAME;And, Rename TEMP_HIREDATE to your actual collumn.
ALTER TABLE EMP RENAME COLUMN TEMP_HIREDATE TO LAST_DATE;In practise, this won't be a good approach but you can get something useful about renaming the
column atleast.
Thanks,
Shankar

How to add few more columns in UWL screen

Hi all
Currently by default we are able to see the columns in UWL header as "Subject", "From", "Sent Date" , "Due Date" , "Status" .
now i want to add few more columns apart from standard columns.
can you please let me know how to add our own columns in UWL header ?? if it is XML changes then pls let me know which xml file exactly we need to change??
Thanks
Sunil

Hi Harini
actually Standard XML file is not necessary for changing the column names in the UWL .
we can use otherway as follows.
go to system admin->UWL administration->click to configure item types and custom views using a wizard then it will take you to another screen -> select the radio button "Customize the look of the UWL main page" click on next then you can select what ever task item you want to change and click on the button respective button at the right end then it will take you to new screen there i added new columns what ever required and saved also but the same one is not reflecting in UWL....
can you please check the same in ur machine and let me know if any other things are required to be done and why this not been done our requirement??
Regards
Sunil

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add the Assignment column on this post outgoing payment in f-53

Similar Messages

Maybe you are looking for