How to add values dynamically for custom property during design time?

I am trying to create a user control with custom properties. I have a property named Server.
And Values for this property is system dependent. I have the code that can generate the values and is working fine.
During the design time, when I include this control in my application, and type the property name, I want Visual Studio to prompt for the values. Like it
does for Alignment property for some controls shows Left, Right, Center.. during design time.
If the Values are static, I can use an enum and it works fine. I need help with dynamic values.

You can't, afaik.
It's either an enum or you don't get that functionality of values.
There is no right left centre, "Towards the top right but just off centre" - which I just thought of... option for example.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Similar Messages

How to link existing PG with custom VO at design time

Hi,
I want to customzie counter group seach page of Counters modules. Here instead of searching thorugh apps schema i want to search groups through my custom schema 'XYZ'. To achieve this, i did following task:
(i) exported GroupSearchPG from apps server to jdeveloper/myprojects directory.
(ii) Created workspace and project in jdeveloper and imported PG to this project.
(ii) downloaded GroupingSearchAM , GroupSearchVO and GroupSearchCO from $JAVA_TOP to Jdev myclasses directory, its working fine for apps schema from jdeveloper
(iii) Created BC4J package with existing name oracle.apps.csi.counter.grouping.schema
(iv) created custom VO (GroupSearchVO) with custom schema 'XYZ' (Since this is expert VO, I need not to extend base EO/VO)
Now, While trying to substitute my custom VO with existing VO. I could not see existing VO to replace with.
My question is how do we link components with exported page? I mean how does the linking happens with GroupSearchPG with its CO/EO/VO or AM.
Can you please let me know which step did i miss?
Thanks in advance
Tripti

For your situation,
VO needs to be substituted,
CO needs to be substituted and
AM needs to be extended.
To make your custom VO available in substitution process, add them to the extended AM. Custom CO can be attached through personalization.
--Shiv

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

How to add search help to custom infotype listbox??

Hi All,
How to add search help to custom infotype listbox??
Thanks in advance

Hi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju

How to add .js link in custom list form through sharepoint designer 2013

hi friends
so far i was adding jquery code to script editor webpart in custom list form.
but i need to know how to add .js link in custom list form through sharepoint designer 2013
please help me.

Hi,
We can add the "JS Link Property" in the “WebPart” node in the custom list form page through SharePoint designer 2013.
Here is an example for your reference:
<JSLink xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm">~site/Style Library/js/custom.js</JSLink>
Noticed that, we should not lose the 'xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm' attribute.
Best Regards
Dennis Guo
TechNet Community Support

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

Hi All how to add new payscale for an employee in sap hr-abap,its urgent

Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumar

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
Reward points for useful Answers
Regards
Anji

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add Image dynamically in Webdynpro ABAP

Hi Experts,
How to add Image dynamically in Webdynpro ABAP.
My requirement is i maintain all the images in a table.
image source has to pick the table URl dynamically and display.
is that possible in webdynpro?
and also please give the suggesion,
without using MIME objects is that anyway to get images?
Thanks in advance.
Regrads,
Jeyanthi

Hi,
are those icons wou want to display then. he following code will be useful.
data : lo_IMG type ref to CL_WD_IMAGE.
LO_IMG = cl_wd_IMAGE=>new_IMAGE( id = img_id SOURCE = 'ICON_BW_APD_TARGET' tooltip = sts_tltp ).
lo_cont->add_child( the_child = lo_img ).
here lo_cont is the container where you want to add the image dynamically and source is the attribiute through which you can change the ICON image. this thing you can getit from data base table and change accordingly.
Regards,
Anil kumar G

How to add a border for Panel (jdk 1.1) ?

how to add a border for Panel (jdk 1.1) ?

Border's are a Swing feature, you will have to draw one by yourself (extend Panel and override paint()).

How to give Value set for model attribute?

Hi all,
How to give value set for model attribute?
plz explain me with some sample code.
Regards,
Srinu

Hi Srinivasulu,
An attribute (of basic data types like integer , string etc) holds a single values.
Please clarify by what you mean value set ?
Also, share the structure of context.
Regards,
Kartikaye

How to create value request for screen field text box tt1

How to create value request for screen field text box tt1
i have a text box name tt1,
i want f4 help for that .
remember i am asking for screen i.e done from screen layout not selectio-screen.
Thank you,
Regards,
Jagrut Bharatkumar Shukla,

Hi,
Create one Search Help in the SE11 for the particular Field that u want to display. In the Screen(Transaction SE51),For that Text Box in the Attributes,in Dict Tab ->Search Help Field give that Search Help Name.
For Eg,
If u want Purchase Order Numbers in that F4 Help.Create one Search Help by giving Table Name as EKKO & Search Help Parameter as EBELN with Lpos & Rpos as 0 & 1.Save & Activate it.
Give this Search Help Name in Dict Tab ->Search Help Field of that Screen Attributes.
Regards,
Padmam.

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

How to add values dynamically for custom property during design time?

Similar Messages

Maybe you are looking for