How to adjust a field to entry length

How can I make a field adjust automatically to the length of the text entered? It is usually only one or two words.
Any suggestions appreciated.

You can't with fields created in Acrobat. What you can do is set the font size to Auto, which causes it to auto-decrease.

Similar Messages

  • How to Adjust the field in Crystal report

    hi experts
    In Sales Quotation i haved created 16 number of user defined fields which they can enter the data in that for one quotation the characters are 189 and for another quotation there are 1245 characters if i preview the lay out the field getting over lapped can any one help me how to rectify the issue with out ove lappind
    Regards ,
    Meghanath.S

    Dear $riniva$ Rachumallu
    If we do that the below field is getting over lapped

  • How to adjust fields display width?

    work in jdev 11.1.2.3.
    in the form VISUAL DESIGNER, all fields looks same length, and there is no width attributes to adjust. When it runs, some fields display too long.
    How to adjust fields display width during design?
    Thanks.

    Hi,
    You dont need to redo it again , unless you have changed properties after initial drag and drop.
    If you have changed , use the value #{bindings.yourAttribute.hints.displayWidth} for columns property.
    <af:inputText value="#{bindings.name.inputValue}"
    label="#{bindings.name.hints.label}"
    required="#{bindings.name.hints.mandatory}"
    *columns="#{bindings.name.hints.displayWidth}"*
    maximumLength="#{bindings.name.hints.precision}"
    shortDesc="#{bindings.name.hints.tooltip}" id="it38">
    <f:validator binding="#{bindings.name.validator}"/>
    </af:inputText>
    Thanks,
    Naresh

  • How to use same Data Type and Length for two fields

    How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
    SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
    FROM bsik
    INTO TABLE it_bsik
    WHERE bukrs = p_bukrs
    AND lifnr IN s_lifnr.
    IF it_bsik IS NOT INITIAL.
    SELECT belnr gjahr awkey awtyp
    FROM bkpf
    INTO TABLE it_bkpf
    FOR ALL ENTRIES IN it_bsik
    WHERE belnr = it_bsik-belnr
    AND gjahr = it_bsik-gjahr.
    IF it_bkpf IS NOT INITIAL.
    SELECT belnr gjahr lifnr xblnr
    FROM rbkp
    INTO TABLE it_rbkp
    FOR ALL ENTRIES IN it_bkpf
    WHERE belnr = it_bkpf-awkey+0(10)
    AND gjahr = it_bkpf-awkey+10(4).
    ENDIF.
    ENDIF.
    Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
    Kindly clarify.

    Hi Saurabh,
    Please see the example code that I have developed for you. It will help you solve the problem.
    REPORT ZTEST_3 .
    tables : BKPF.
    data : begin of it_bkpf occurs 1,
             belnr type RE_BELNR,
             awkey type awkey,
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf.
    data : begin of it_bkpf1 occurs 1,
             belnr type RE_BELNR,
             awkey type gjahr,              " change the data type
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf1.
    data : begin of it_rbkp occurs 1,
             belnr type BELNR_D,
             gjahr type gjahr,
             lifnr type LIFRE,
             xblnr type XBLNR,
           end of it_rbkp.
    select belnr
           awkey
           awtyp
           gjahr
           from bkpf
           into table it_bkpf
           where BUKRS = 'TELH'.
    loop at it_bkpf.
    it_bkpf1-belnr = it_bkpf-belnr.
    it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
    it_bkpf1-awtyp = it_bkpf-awtyp.
    it_bkpf1-gjahr = it_bkpf-gjahr.
    append it_bkpf1.
    clear it_bkpf1.
    endloop.
    select  belnr
            gjahr
            lifnr
            xblnr
            from RBKP
            into table it_rbkp
            for all entries in it_bkpf1
            where belnr = it_bkpf1-belnr
    This is just an example. Change the fields according to your requirement.
    Regards
    Abhii
    Edited by: Abhii on Mar 9, 2011 9:08 AM

  • How to  adjust the text in input field

    Hi Expert,
    New in VC development. Can someone guide how to adjust the text in input field? Because of  long text length it  is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

    HI Kundan,
    I assume that you have already tried different options perent in Label Postion for the field.
    If none of these options meet your requirement then you can try the following workaround:
    In the display properties, select label position as no label.
    In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
    Now place this new UI Control in before your actual Input field such that it appears as the field label.
    Hope this helps.
    Regards,
    Rk

  • How to adjust column length in function REUSE_ALV_GRID_DISPLAY

    Hi,
    I am using this function REUSE_ALV_GRID_DISPLAY to display .Please tell how to adjust the column length in  this function, so that it is set to default field name size.
    thanks

    Hi anu,
    The column width can be adjusted by using the following method:
    -> define layout of the type.
                data: it_layout type slis_layout_alv.
    -> call the reuse alv... by using the is_layout field name with the above defined variable.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
        I_CALLBACK_PROGRAM                =  <program that calls reuse>
        I_CALLBACK_PF_STATUS_SET          = < form to set pf-status>
        I_CALLBACK_USER_COMMAND           = <form to catch user command>
        I_STRUCTURE_NAME                  = < structure to be passed>
        I_GRID_TITLE            = < any title to appear on top of the grid display>
        IS_LAYOUT                         = it_layout
        IT_FIELDCAT                       = IT_FIELDCAT[]
        IT_EVENTS                         =
        IT_EVENT_EXIT                     = I_EVENT_EXIT  < to capture exit event>
      I_SCREEN_START_COLUMN             = 0 <screen settings>
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
       TABLES
        T_OUTTAB                          = IT_INACT_OBJ
       EXCEPTIONS
        PROGRAM_ERROR                     = 1
        OTHERS                            = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                 
    -> write a form to set the layout of the grid...
    *&      Form  build_layout
          text
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for double click or "click(press f2)
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " build_layout
    endform.   
    This will optimize the output of the grid display.
    Hope this helps!!!
    Revert if any queries!!!
    regards,
    Naveenan.

  • How to adjust the number of blog entries on the archive page?

    Does anyone know how to adjust the number of blog entries on the archive page?
    As it stands now the blog archive page lists the archives past the 4000px page length in what appears to be a long endless list.
    Thanks in advance for any help!

    Thanks Wyodor but that just adjusts the entries on the blog page....not the blog archive page.
    On the blog archive page it's just a long endless list of entries. It appears that you simply cannot adjust this on the archive page. Additionally if the blog entries exceed 50 I have to start deleting older entries.
    Overall iWeb has served my needs well but this issue *****. They could probably fix it with a software update if they wanted to.

  • How to create a field with  1200 chars length

    Hi,
    Will anybody let me know how to create a field with length 1200 in a table.
    Regards,
    Madhavi

    Hi Madhvi,
    Other thing what you can do is
    1. First create a Table type.
         Goto SE11-> Dataelements ->Table type
         There on the next screen select Predefine radio button & there provide data type & size.
    2. Create a structure having a field typa of Table type created before. say that field is quant.
    Now in your program refer that structure to create an internal table & work area.
    Now if u append ur text to the field quant.
    try creating line type of size more that 255 if it works then fine other wise reduce it.
    Note:: This will be a deep structure.
    so first append value to the field quant,  the at the end of first record append valu to ur internal table.
    thanks
    Satyam

  • How to change the field length in standard sap program.

    Hi All,
    How to change the field length in standard sap program.
    Urgent
    Example:
    Text1 type c length 75,
    To change :
    Text1 type c length 150,
    Point will be rewarded..
    Thank you,
    Vikram.C

    If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
    Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
    regards, Rob

  • How to add the field sapcomponent in fast entry screen

    Hi ,
    This is reg the support message which is created using crmd_order.
    I have a requirement in which the field  sapcomponent in the transaction tab which
    has to be placed in the fast entry tab also.On populating this in the fast entry screen the same value
    should also be populated in the transaction tab.
    Guide on how to create the field in the fast entry screen and how to link it with the transaction tab.
    Step by step procudure to achieve this is appreciated.
    Regards,
    srikanth.

    Hi Ana,
    Greetings and Good Morning.
    We are currently going through the implementation of electronic nota fiscal in R/3 and have already implemented the old data sources and BCT for the same. Do you have any idea for enhancing the new data structures. Looks like you have gone through this recently.
    Do you have a new BCT available for the same.
    Kindly send me some info.
    Thanks
    regards
    MS

  • How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

    Hi All,
    Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
    Thanks
    Gandalf

    hi
    Go to OB26
    select Your criteria ( create, change or display)
    double click on it
    again double click on Bank/financial details
    there you will find the Planning level make it require entry
    save
    with regards
    ramanuja chary

  • How to read table fields form a table  having length of 7 characters

    HI all,
    could you please tell me how to read table fields from a table having length 7 characters, i have requirement that in my ztable i have 30 fields out of which 20 fields are location fields, i want to select 20 fields which have 7 characters length.
    please could any body suggest me on this issue.
    thanks,
    sre.

    hi,
    try like this
    create a data variable of type i as
    data: len type i.
    create internal table for 20 fields as
    data:begin of itab,
               fld 1 type .......
            end of itab.
    data:itab type itab1 occurs 0 with header line.
    loop at itab2. // original internal table which all fields.
    read table itab2 with index sy-tabix.
    len = strlen (itab2-fld).
    if len eq 7.
          move itab2 itab1.
          append itab1.
    endif.
    endloop.
    if helpful reward some points.
    with regards,
    Suresh.A

  • How do I enter a simple entry field into my design?

    How do I enter a simple entry field into my design?

    Hi,
    Please elaborate your issue. If possible, please provide us a working example.
    Regards,
    Aish

  • Please tell me how to adjust field width for alv data .

    Hi,
          Please tell me how to adjust field width for alv data . Also i want to remove zeros after decimal coming in field.
    Regards,
    Ranu

    Hello Ranu,
    You need to set OUTPUTLEN field from field catalog table for every column.
    DATA lt_fieldcat TYPE lvc_t_fcat
    DATA lw_fcat type lvc_s_fcat .
    lw_fcat-fieldname = 'BNAME' .
    lw_fcat-inttype = 'C' .
    lw_fcat-outputlen = '12' .  -----> for e.g. set width of column BNAME
    lw_fcat-coltext = 'User Name' .
    lw_fcat-seltext = 'User Name' .
    APPEND lw_fcat to lt_fieldcat .
    Hope this resolves your issue!
    Thanks,
    Augustin.

  • How to adjust maximum track length?

    I'm working in GarageBand 3.0.5, and I'm using one track to record from an external microphone. I have no problem recording and getting the sound to play back, but it seems that I've run into a point where it is no longer possible to extend the track time. It has stopped at 1:06:08 and won't let me record any more, even after saving.
    Does anyone know how to adjust the maximum length of a track?
    I have tried going into GarageBand preferences, under the Audio MIDI tab and changing the buffer size from small to large, but that did not make any difference. I can not think of anything else to change. Any help that anyone could provide would be greatly appreciated.

    http://www.bulletsandbones.com/GB/FAQPages/RecordLength.html

Maybe you are looking for