How to adjust the image captured when using Shift Ctrl Command 4 shortcut

After installing Mavericks on my macbook pro I now have issues when I use shift ctrl command 4. When pasting the image into an email it is very large and I am unable to edit it. It used to copy in much smaller.

Open Preview Application.
Select you image.
Click on Tools and select Adjust Size:
Enter the desired parameters:
Ciao.

Similar Messages

Is there a way to adjust the frame length when using a FFT

Is there a way to adjust the frame length when using a FFT?
Thanks,
David

I thought that to have a longer frame rate you just need to have a longer sample set.

How to store the images in KM using Code

Hello,
i retreived the images from KM using the following code.
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.resource.IResource;
public class ThumbnailTes extends AbstractPortalComponent {
     /* (non-Javadoc)
@see com.sapportals.portal.prt.component.AbstractPortalComponent#doContent(com.sapportals.portal.prt.component.IPortalComponentRequest, com.sapportals.portal.prt.component.IPortalComponentResponse)
     public void doContent(IPortalComponentRequest request,IPortalComponentResponse response) {
String path =request.getResource(IResource.IMAGE,"images/sap1.gif").getResourceInformation().getURL(request);
               response.write("<img src = "path"/>");
but i want to store the images in KM using code.Can anybody help me.
acutally the image is my location(c:/images/sap1/jpg).i want to upload this image to KM using code.
Can anybody help me how to do that?

Hi Kasturi,
> not accepting the points
It worked on this and on one other thread, but this is still open: How to upload the image
> want upload the images from the client side machine
> to KM
In the thread I just referred to, I already provided information about the HTMLB upload control. With this at hand, you'll get the file from the client to the server.
At server side, get an ICollection instance where you want to store the file and create the corresponding resource. See https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/javadocs/nw04/sp12/knowledge management/com/sapportals/wcm/repository/icollection.html#createresource(java.lang.String,%20com.sapportals.wcm.repository.IPropertyMap,%20com.sapportals.wcm.util.content.IContent)
Hope it helps
Detlev

[CS2]How to get the Image Width & Height using JS (ILLUSTRATOR CS2)

Hi,
How to get the Image width & height of an Image using javascript .Im using Illustrator CS2.
Any sample code
Regards
MyRiaz

you can reference the dimensions of a loading image (or swf)
by referencing the target movieclip's dimensions AFTER loading is
complete. ie, use preloader code or the onLoadInit() method of a
moviecliploader listener.

How to adjust the image?

hi i need help on this i have to do a slideshow and once i put the image in drop zone the image won't center i need to adjust the image but i dont know how pls. help me.

hey there Bill & welcome to Discussions.
if you want to play the slide show don't put it in a "Drop Zone", Drop Zones only play on the menu, not as the "feature movie".
select the "i" for the Inspector, & click on the desired drop zone. in the Inspector HUD you'll see some controls for adjusting your image. the inspector also has controls for adjusting music, buttons & bullets, depending on what you select in the Menu Template.
good luck.

How to Select the Current Row When Using af:iterator?

Hello all,
I encounter the following problem when using af:iterator to display data from
a View Object:
When trying to display the content of a row via a popup, only the first row is
returned no matter which row is selected. So a selection of the current row
should exist or some other method which should allow the access to the
current row.
The af:table has a selectionListener attribute which permit to achieve this.
Does anyone know about some similar attribute or some method for
selecting the current row when the af:iterator is used?
Thank you,
Mirela

I would be interested in the answer to this basic question as well. I cannot get the selected row value of an attribute in an iterator for a view if I simply set-up a attribute binding to the iterator. It seems that this should be possible. I've had no other option but to obtain the current row and the related attributes programmatically. This works fine, but if there is a more elegant option, then I'd certainly like to use it.
          <af:table value="#{bindings.CompaniesView1.collectionModel}"
                        var="row"
                        rows="#{bindings.CompaniesView1.rangeSize}"
                        emptyText="#{bindings.CompaniesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                        fetchSize="#{bindings.CompaniesView1.rangeSize}"
                        selectedRowKeys="#{bindings.CompaniesView1.collectionModel.selectedRow}"
                        rowBandingInterval="0" id="tCompanies"
                        summary="Companies"
                        width="100%"
                        rowSelection="single"
                        binding="#{CompanyBackingBean.companiesTable}">Page Def:
    <attributeValues IterBinding="CompaniesView1Iterator" id="Id">
      <AttrNames>
        <Item Value="Id"/>
      </AttrNames>
    </attributeValues>I should be able to get the Id attribute value of the current selected row using "#{bindings.Id}", right? Well, it doesn't work for me. Any ideas?
Thanks

How can I adjust the file names when using the "export layers to files" Script in photoshop?

Currently the standard set up adds "_0000s_0001_" in front of the layer names that I need the new files to use. I'm processing hundreds of images so I'd like to avoid selecting and deleting the extra characters one by one. Any way to automate this or set it correctly before exporting?

http://forums.adobe.com/thread/688851?tstart=0

How to determine the positioning order when using tab key?

Hallo,
in my jspx-page i want to define the order which the cursor jumps when the user is using the tab key.
i don't know how to? in html there i can use tabindex. which way i must go?
Any help is appreciated.

I found that tabindex is not applicable. But i think it is an important point for better handling.
Is there no easy way to do it?

How to resolve the error -1073807339 when using Agilent LAN/GPIB Gateway (E5810A)?

Dear Sir/Madam,
Appreciate that you could advise me on the following error occur when connect power meter E4419B to computer via E5810A LAN/GPIB Gateway(remote interface) & run with Labview:
-1073807339
VISA Write in E4419_read_power.vi
I have added 5s timeout to Labview program but the result as previous.
There no error occurs when the power meter to computer via USB/GPIB interface(82357B).
Is it related to E5810A driver or the program I wrote?
How to resolve it?
Attachments:
E4419_read_power.vi ‏16 KB

Hi.
I'm experiencing the same problem when connecting a laser controller (New Focus Vortex TLB-6000) via the Agilent E5810A to a PC.
There are no problems when connected through a regular serial port, but timeouts arise every few seconds through the E5810A. I have another controller (SRS LDC501) which works very well with a second Agilent console.
Have you managed to find a solution to this problem?
Thanks,
Orel.

How to switch the keyboard language when using a bluetooth keyboard?

When using the on-screen keyboard I have the little globe to switch languages, but when using a bluetooth keyboard the on-screen keyboard is hiden.
I want to be able to write in different languages using the bluetooth keyboard, also the auto-correct gets in the way if I write in a different language than english and it tries to change the words to the closest similar english word.
Help!

I see that now Tom, I'm sorry to confuse things. I think my problem might have been that I had the keyboard too far away from the phone, and so when I looked back from the keyboard to the phone, the screen indication of the languages had already disappeared from the screen. Because I have more than one language with Roman characters installed, I thought that no change was occurring from that sequence of commands, since I wasn't getting Korean. But now that I see your correction, and watch the screen closely, I see that you're right. I apologize. (And of course, I'm grateful to have a simpler way of switching languages!)

How to get the displayed message when using FM: ABAP4_CALL_TRANSACTION

Hi,
I am calling FM ABAP4_CALL_TRANSACTION from MS-Excel. This FM works perfectly for me except the system messages that SAP returns are not always understandable or intituative. My question is there another FM or Table that I can use to convert the data from MESS_TAB to a more meaningful message for the users?
Examples listed below:
Normal T-Code Message
FM Message in MESS_TAB
Real Meaning
Fill in all required entry fields
COBL-RMVCT
Field COBL-RMVCT is a required field
Document 400000000 was posted in 130
4000000000 130
Document 400000000 was posted successfully
Thanks for your Help

Hi Karim,
when you have the parameter to generate the message, you can use the following RFC function module:
BAPI_MESSAGE_GETDETAIL
The module has the following interface:
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(ID) LIKE BAPIRET2-ID
*"     VALUE(NUMBER) LIKE BAPIRET2-NUMBER
*"     VALUE(LANGUAGE) LIKE BAPITGA-LANGU DEFAULT SY-LANGU
*"     VALUE(TEXTFORMAT) LIKE BAPITGA-TEXTFORMAT
*"     VALUE(LINKPATTERN) LIKE BAPITGA-LINKMASK OPTIONAL
*"     VALUE(MESSAGE_V1) LIKE BAPIRET2-MESSAGE_V1 OPTIONAL
*"     VALUE(MESSAGE_V2) LIKE BAPIRET2-MESSAGE_V2 OPTIONAL
*"     VALUE(MESSAGE_V3) LIKE BAPIRET2-MESSAGE_V3 OPTIONAL
*"     VALUE(MESSAGE_V4) LIKE BAPIRET2-MESSAGE_V4 OPTIONAL
*" EXPORTING
*"     VALUE(MESSAGE) LIKE BAPIRET2-MESSAGE
*"     VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*"      TEXT STRUCTURE BAPITGB OPTIONAL
Best regards
Thomas

How to get the log information when using a class?

Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
    private static final Log LOG = LogFactory.getLog(AClass.class);
    public void logit(){
        LOG.debug("This is the debugging log.");
public class AClass{
    public static void main(String[] args) {
        LogClass l=new LogClass();
        l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.

jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know.

How to display the master TOC when using Context help in a merged document

I use Robohelp 10. I have created a large Merged Webhelp project and I have set out the project master with nothing in it other than merged projects place markers.
This is the layout of the generated projects etc.
Generate
          Master.htm
             Redirect.htm (Home page is a redirect to Project 1 Home Page - not in TOC)
mergedProjects
          Project1
              Home Page.htm
          Project2
               Redirect.htm (Home page is a redirect to Project 1 Home Page - not in TOC)
          Project3 etc.
                Redirect.htm (Home page is a redirect to Project 1 Home Page - not in TOC)
I can get the help to work great when I call up the master page, which shows the TOC for the whole project and the default home page. And from the breadcrumb the home link goes to the home page and shows the Main TOC
However when I call a page using context help ID I get a single frame with the selected page. The link to show the TOC shows the TOC but it is the top of the merged project and not the master TOC. The home link in the does display the home page but again the displayed TOC is the one of the current merged project.
The question is :
How can I get the Master TOC to show all the time regardless of what page I call using a context ID or how can I create a link that will take me back to the Master TOC?
I remember when I created a previous help file for chm output I had to modify all the ali files in order for the redirect to work throught the master chm. Surely this is not the case with webhelp?
TonyC

I am sorry that I didn't get back to all you guys that took to answering my very promptly. Unfortunately I was not in a position to answer to the suggestions made. as I was away from my computer which had Robohelp on.
Anyway, I did try a couple of scripts mentioned, but didn't really have any success i achieving what I need to do.
I set up a redirect which redirected to the main home page. I tried setting the home page in a main sub-project - so the redirect when from any sub project
Generate
     Master-project.htm (Home Page = Help_Welcome.htm)
merged Projects
SubProject1
            [Home Page = home_redirect.htm (a redirect see below) ]
     SubProject 2
            [Home Page = home_redirect.htm (a redirect see below) ]
     SubProject 3
            [Home Page = home_redirect.htm (a redirect see below) ]
home_redirect.htm (a redirect use by sub-topics)

//]]></script>
This setup works fine as long as I call the master page. The TOC is as I would want. However if I call an ID from my application I get the required page to display and I can get the TOC to show. The problem is that the TOC is from the current sub-project and not the master project as I would want.

How to kill the yellow outline when using setFocus?

Hi...
I tried using:
btnname._focusrect = false;
It did kill the yellow outline but then I can't navigate using the up/down/right/left key anymore. How to solve this problem? I have been researching days on this.
Please help!
Thks!

Hi Kartik,
I tried:
_root._focusrect = false;
It did remove the outline but I could not navigate using the arrow keys anymore, I can only "tab" through the buttons. I need to use the arrow keys as this is for a presentation using a remote control.
As for:
_global._focusrect = false;
It didn't work.
I still don't understand why removing the yellow outline also means removing the arrows functions?...mmmm
Thks...

How to change the search provider when using the Firefox Home Button Search feature?

In Firefox itself I have configured duckduckgo as my default search provider.
But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that?
I like the Firefox Home Button Search (or whatever it's called) otherwise, but it's annoying that it does not use the default from Firefox.
I use the Google Now Launcher.

''philipp [[#answer-704494|said]]''
<blockquote>
...usually it will be enough to switch the default engine in firefox back and forth once to work around the issue...
</blockquote>
Thank you, problem resolved

How to adjust the image captured when using Shift Ctrl Command 4 shortcut

Similar Messages

Maybe you are looking for