How to allow multiple wildcard elements in biztalk schema

Hi,
In my input xml, I can have one or more unknown elements in the xml. I know I can use <xs:any> in my schema for each of these elements but it does not work when there is unknown number of these unknown elements occuring in the input xml.
I know the location in xml where these unknown elements appear but I dont know how many times they appear in each location.
Any help on how to allow it would be very appreciated
thanks
manibest

Hi manibest,
You're trying to find a technical workaround on how to handle this in schema. But we have to understand that schema is to defining the structure and content of XML and you want a schema which is not going to define the content/structure of your
XML, its basically a flaw to conceive a Schema which has no relation to the XML.
Anyway what do you mean by " xml accepted by the schema"  - As mentioned in the
other post you have raised today, if you don't enforce XML validation and if you don't bother about mapping this unknown fields across to the outbound schema or if your orchestration's processing is not bound to these unknown elements then you can
do use it.  
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

  • How to allow multiple selection of nodes in a JTree

    How to allow multiple selection of nodes in a JTree ?
    Thanks
    S.Satish

    By default when you create new instance og JTree the selection model is multiple selection. And if you want to change it you use next:
    tee.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
    or
    tree.getSelectionModel().setSelectionMode(TreeSelectionModel.CONTIGUOUS_TREE_SELECTION);
    or
    tree.getSelectionModel().setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
    Hope will help!

  • How to allow multiple instances of air desktop application

    hi all
    Adobe air desktop application only allow single instance of
    application. How to allow multiple instances like in other desktop
    applications?.
    thanks

    Thanks a lot morgair, i will check with exe4j tool.
    Actually the problem is, thread is not waiting for second request.
    thatswhat i thought it may because of thread.
    Thanks & Regards
    Sudha

  • How to remove Existing dll while deploying biztalk schemas

    Hi Friends,
    How to remove Existing dll while deploying biztalk schemas.
    am getting error property schema dll is being used by other person.just like that..
    Thanks & Regards
    Rajiv

    Goto BizTalk admin console -- > If you know the BizTalk application where this dll is already deployed, select that application. Otherwise select "All Artifacts" --> Select "Resources" folder --> And remove the dll of the above property schema project
    by right clicking on the Artifacts and select remove
    Other option is go to "Schemas" folder of the above BizTalk application (again in admin console),  --> select the schema ---> right click the schema you wan to remove  (Property schema) and click remove.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to allow multiple domains under Access-Control-Allow-Origin

    Hi,
    We have a domain where will get CORS request from another domain hosted on seperate DC. We can't set
    Access-Control-Allow-Origin as * due to security concerns & IIS can't take more than 1 value at a time. Kindly suggest how to pass multiple httpheader  for
    Access-Control-Allow-Origin.
    Regards,
    Dhiraj

    Hello Dhiraj,
    This is not the suitable forum for your question, you may post in
    IIS forums for more help.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How To Delete Multiple Query Elements in a Transport

    Guys,
    How do you delete Multiple Query Elements in a transport in DEV? Or it's not posible.  I tried to select multiple but only one is being deleted.
    Thanks,
    Recca

    Hi Recca,
    As Nanda said, just go to tcode SE03..Click Unlock Objects (Expert Tool)..Paste your TR number (one at a time) then click Unlock..
    Go back to SE10 and delete your TR numbers..
    Regards,
    Loed

  • How to allow multiple users login to a MAC PRO without interruption?

    I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
    Objective:
        One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
        The users have their own workspace, and they will not interrupt each other.
    What I tried:
        I created two mange accounts on the MAC.
        Account 1 was used to directly login on the mac desktop.
        Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
    Problem:
    When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
    If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
    Question:
    I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
    If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
    Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
    If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
    If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
    I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
    Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
    Thanks you very much for your kindly help.

    I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
    However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

  • How to allow multiple-session changes to fields in a PDF using Reader 7

    Good morning
    We used Adobe LiveCycle Designer ES 8.2 to create a seminar registration form that people can download from our website.
    The idea is they fill it in and email it back as an attachment.
    There are some browser plug-in issues - e.g. in Internet Explorer I can fill in the form and save it to my PC, and the PDF created on my PC contains the data I entered. If I do the same thing in Firefox, the saved file is empty (the data isn't saved).
    But the real problem is, if I open the PDF in Reader 9 (at work) I can fill in the form, save, re-open and make changes.
    With Reader 7.0 (at home), if I enter data and save and re-open, I get a message as follows:
    "The document contained certain rights to enable special features in Adobe
    Reader. The document has been changed since it was created and these rights
    are no longer valid. Please contact the author of the original version of this
    document."
    ...meaning, with Reader 7.0 I only get one chance to fill in the form.
    Is there a way of creating the PDF that allow users with earlier versions of Reader to have more than one crack at it?
    e.g. would saving the file for Reader version 7 solve the issue?
    thanks in advance
    PS: I didn't do the form, not sure how it's done, and I don't have Reader 7 where I am now.

    CtDave wrote:
    Reader enable the form then users of Adobe Reader will be able to fill in and save.
    Be well...
    Shouldn't one use Acrobat to enable the form?

  • How to allow multiple values in a single blank cell in WebI report

    Hi
             I am working in BO XIR2. I have a scenario as follows.
    In a single cell (blank cell from template) i need to display multiple contact persons. When I drag the contact person name into the blank cell, I am getting an error: MULTIVALUE). Please let me know how to use a function so that I can show two or three contact person names in a single blank cell.
    I tried to use Replace and Char function as follows to bring Carriage Return functionality to the cell.
    Replace([Contact Person]; ";" ; Char(13)) but this did not work.
    Thanks in Advance.

    BOUser11:
    I know this thread has been answered. I recently came across a scenario where I happen to populate multiple values in a single blank cell(from templates). But the only catch being that if user enters multiple values for a prompt you can show them in a single cell eg: =UserResponse("Enter value(s) for Branch:"). would be the formula for the blank cell. Afetr the user selects three values say A, B,C, webi puts it in the format of A;B;C. in a single cell.
    In your case try giving that as a prompt to the user or answer that multi prompt some how and when u use the above formula it should suffice your requirement.
    Let me know if you have tried.
    Thanks,
    karthik

  • How to allow multiple output parameters in a user-defined service operation???

    I have creating a self-defined service operation “LDAPAddUser” to connect to LDAP server to create user accounts. I want to get 2 output parameters after executing the operation. One is the result (Boolean data type) and one is the error message (String data type). However, since Java only support one return value in a method, it seems that only one output parameter can be returned. May I have the suggestion so that multiple parameters can be supported in this case? Here is the extracted code
    In Java program,
    public Boolean addUser(String url, String aName)
    In file "component.xml",
         <operation name="addUser" method="addUser" orchestrateable="true" anonymous-access="true">
      <hint>Add a new user</hint>
         <input-parameter name="url" type="java.lang.String" required="true" title="LDAP URL">
         </input-parameter>
              <input-parameter name="aName" type="java.lang.String" required="true" title="Admin Login Name">
         </input-parameter>
              <output-parameter name="Result" title="Result" type="java.lang.Boolean">
              </output-parameter>
    Besides the boolean return value, I want to get another return value (string data type). Any suggestion ?

    I've returned multiple values to LiveCycle by using a complex object as an intermediatory.
    For example if I need to return two strings (firstName and lastName), I'll first build a single class (name) with two string attributes (private String firstName; private String LastName) and add getters and setters to my "name" class for each.  My service class method will return an object of type "name".
    for example  public name mymethod(String GUID, String username, String password).......
    Then in the component.xml you can return the two strings as long as you use the binding type "Bean":
    <output-parameter name="firstName" title="First Name" binding-type="Bean" property="firstName">
                        </output-parameter>
    <output-parameter name="lastName" title="Last Name" binding-type="Bean" property="lastName">
                         </output-parameter>

  • How to allow multiple apps to read from same udp port?

    hello all!
    when i'm trying to open the same udp socket from two different applications, i get error 60 :
    "Address in use".
    i know for sure that it is possible.
    but how i do that with labview ?
    thanks.
    guy.
    Solved!
    Go to Solution.

    I agree with Adnan that this is not really possible with the normal mechanisms. The OS needs to know which application should get the data. An exception are e.g. packet sniffers (such as Wireshark) that intercept the network traffic at a lower level and passively listen in.
    Please provide some details on what "other applications" have done this.
    LabVIEW Champion . Do more with less code and in less time .

  • JPA: how to organize multiple databases having the same schema definition?

    Hi there,
    I'm new to Java EE but I could finish some test projects on GlassFish 3 / Java EE 6 platform.
    Now it's time to build the actual system and I need some help in that.
    So, I can't really tell you the exact purpose of this system but let's look at the following example which is very close to what I need.
    Say there is a database schema definition (DDL) for Oracle 11g and this schema is storing the inventory of a shop. So tables like product, category, price etc
    Say there are 50 shops, and I'm getting a new database for each shop every month holding their inventory.
    So every month I'm receiving a SQL file with INSERTs (DML) for every shop for the DDL I mentioned above.
    I'm getting 50 SQL files for the 50 shops every month, so in a year you're talking about 600 SQL files to import.
    If it was php/MySQL I could import them into a separate database each, call it shop1_May11, shop2_May11 etc reflecting the shop name and the month in the database name.
    This is my question how you guys think I should achieve this in Jave EE / Oracle.
    As the DDL is the same I thought to create an Entity for each table and use the Java Persistance API to create the databases and then I'd import the month/shop specific SQL files.
    But this means I'm gonna create 50 new schemas in Oracle every month?
    Or what's the best way to achieve this?
    Thanks in advance
    Edited by: 833519 on May 18, 2011 5:28 AM
    Edited by: 833519 on May 18, 2011 5:29 AM
    Edited by: 833519 on May 18, 2011 5:31 AM

    JPA helps a lot in persisting and retrieving data that has relationships without having to worry about the relationships at a sQL level.
    So you get a java programmer that builds relationships using Java classes (the entities) and a persistence provider worries about the sql required to materialize those relationships.
    You seem to be using SQL inserts for persisting the data and you want to generate the reports from SQL as well.
    You can use it but you won't be gaining much of its advantages for this project.
    Consider reporting applications like the jasperserver for the reports.
    Also, I have seen people get away with using one database for this type of thing and just adding a clientid (and optionally branchid) to each table.

  • How to get only mandatory elements of BO schema using XAI Inbound service

    Hi Folks,
    I create a XAI Inbound service for a BO and I just want to generate the WSDL xml request schema with only mandatory fields of that BO.
    How to acheive this? Is it possible and is there any solution already for this?

    Hi Folks,
    I create a XAI Inbound service for a BO and I just want to generate the WSDL xml request schema with only mandatory fields of that BO.
    How to acheive this? Is it possible and is there any solution already for this?

  • How to have multiple windows of same app under JSF 1.1

    I know this has been addressed in JSF 1.2, but does anyone have a good solution in JSF 1.1 concerning how to allow multiple application instances to be opened in different browser windows at the same time? I work for a large financial services company and we have multiple instances of the same application up when working with more than one customer or account at the same time.
    We�ve figured out a way to use a custom variable resolver and property resolver to provide an application instance scope that works with managed beans; however, we are struggling with how to handle the JSF component tree. We can replace the StateManager or ViewManager, but we will be running under a vendor implementation of JSF and do not want to outright replace their implementation. We wanted to simply define our own manager, decorate the viewId with additional information, and then pass it on to the default manager. The big issue is that while the restoreView methods take the viewId, the writeState methods do not. This seems like a pretty big show stopper to us. If we have to wait until JSF 1.2, it will be a long wait. Any ideas?
    Thanks.

    The way I'm thinking of doing this is to use nested beans. So for example, I'd have an "AccountBean" written as a JSF managed bean, but this is not what I'd declare in faces-config. Instead, I'd have an "AccountMgr":
    <managed-bean>
    <managed-bean-name>acctMgr</managed-bean-name>
    <managed-bean-class>AccountManager</managed-bean-class>
    </managed-bean>AccountManager would have a map of AccountBean objects. In my pages, I'd reference the acctMgr:
    #{acctMgr.accts[acctEditor.acctId].firstName}If anyone has a better idea, I'd love to hear about it.

  • How to upload multiple files in Webdynpro using File upload Screen Element

    Hi Experts,
          Can anybody tell me how to upload multiple files/pdfs in webdynpro using file upload screen element, and also please tell me what is the maximum storage limit of RAWSTRING data type,Advance Thanks.
    Regards,
    Sandesh

    Hi Sandesh,
    this is simply not supported, not in WebDynpro nor in standard HTML.
    A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
    I hope it will  help u..
    ----------------------OR-------------------------
    As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
    http://scn.sap.com/docs/DOC-2270
    ----------------------OR-------------------------
    You can use Table UI element.
    Regards,
    Deepak Singh

Maybe you are looking for