How to alter value for processes in Oracle 10g XE

Im installing weblogic server 11g. Im getting the error
RCU-6083:Failed - Check prerequisites requirement for selected component:SOAINFRA
Please refer to RCU log at C:\stageSOA\rcuHome\rcu\log\logdir.2010-06-18_17-04\rcu.log for details.
RCU-6107:DB Init Param Prerequisite failure for: processes
Current Value is 40. It should be greater than or equal to 200.
RCU-6092:Component Selection validation failed. Please refer to log at C:\stageSOA\rcuHome\rcu\log\logdir.2010-06-18_17-04\rcu.log for details.
I have read in a forum this this command will work
alter system set Processes=300 scope=spfile;
where should I write this command. I have tried the SQL command line. But it says its invalid

One thing I detected here as a bad practice, you blindly issued the command "ALTER SYSTEM ... SCOPE=SPFILE" and later on you asked why you were not able to see the change.
It lets me know that you applied a change without even bothering to find out what it was about. Please make sure next time you blindly apply a command this doesn't start with "DROP ...." or you may face a hard time.
~ Madrid
http://hrivera99.blogspot.com

Similar Messages

Maximum value of Processes in Oracle 11g

Hi,
In our application, we do get the following error frequently.
ORA-12516, TNS:listener could not find available handler with matching protocol stack
When i searched about it, I learnt that the processes /sessions used might be exceeded.
So, I'm trying to alter the values of the system parameters - Processes & sessions for my DB.
The following link says the maximum value for PROCESSES is 'operating system dependent'
http://docs.oracle.com/cd/B28359_01/server.111/b28320/initparams188.htm#REFRN10175
The DB Host machine is Windows Server Enterprise and its 32-bit machine.
The DB is *"Oracle Database 11g Enterprise Edition Release 11.2.0.1.0"*
Can you please help me find out the maximum value of the PROCESSES parameter that we can set for this OS?
Let me know if my understanding of the issue is wrong.
Regards,
Tamil

Hi,
I checked the v$resource_limit table,
Resource Name    CurrentUtilization Max_Utilization Initial_Allocation Limit_Value
processes     119          150     150     150
sessions     124          158          248     248
I could see the current value for processes is 119 here. When i checked v$process few hours back, it was 145.
I could not use the command "ulimit -a" as its a DB installed in Windows box.
Can you help me to find out how i can find the value for Windows OS?
Thanks,
Tamil

How to set value for selectOneChoice

Hello,
How to set value for selectOneChoice defined as:
<af:selectOneChoice label="Label" id="soc1" binding="#{DepositorMergingBean.socSurnameComponent}">
<f:selectItems id="si1" value="#{DepositorMergingBean.socSurnames}"/>
</af:selectOneChoice>
where socSurnames is List<SelectItem> - manually filled list of SelectItem(SomeObject, (String)text_description), so - SOC is filled manually (no binded iterators, etc..)
Neither socSurnameComponent.setValue( new Integer(0) ) nor socSurnameComponent.setValue( socSurnames.get(0) ) do not help.
Thanks in advance.

this.selectOneChoice.setValue(selectItems.get(2).getValue());Try as per the following sample:
SelectOneChoiceTest.JSPX:
<af:form id="f1">
<af:selectOneChoice label="Select One Choice" id="soc1"
binding="#{SelectOneChoiceTestBean.selectOneChoice}">
<f:selectItems value="#{SelectOneChoiceTestBean.selectItems}"
id="si1"/>
</af:selectOneChoice>
<af:commandButton text="Set Selected Value" id="cb1"
actionListener="#{SelectOneChoiceTestBean.onClick}"/>
</af:form>
SelectOneChoiceTestBean.java:
import java.util.ArrayList;
import java.util.List;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.view.rich.component.rich.input.RichSelectOneChoice;
public class SelectOneChoiceTestBean {
private RichSelectOneChoice selectOneChoice;
public SelectOneChoiceTestBean() {
super();
private List<SelectItem> selectItems;
public void setSelectItems(List<SelectItem> selectItems) {
this.selectItems = selectItems;
public List<SelectItem> getSelectItems() {
selectItems = new ArrayList<SelectItem>();
selectItems.add(new SelectItem("One", "One"));
selectItems.add(new SelectItem("Two", "Two"));
selectItems.add(new SelectItem("Three", "Three"));
return selectItems;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
public void onClick(ActionEvent actionEvent) {
this.selectOneChoice.setValue(selectItems.get(2).getValue());
Thanks,
Navaneeth

How to estimate value for LogBufParallelism

how to estimate value for LogBufParallelism.
Are there any dependencies between LogBufParallelism and LogFlushMethod ?

If you are going to use logbufparallelism
please make sure to use a release >= 11.2.1.7.0, as there was a bug related to using logbufparellelism in previous releases:
In previous releases, the replication agent could crash and invalidate the database when the replication agent was reading close to the end of the in-memory logs. This problem could occur when the value of the connection attribute LogBufParallelism was greater than 1. In that case, one particular log record could cause a log strand reader to block and cause other strand-readers to read records in an incorrect order. This problem has been fixed. (BugDB 10174319 and 10176689)
The suggestion is that you can set to any value up to the number of processors or cores that you have.
Most people though I usually choose to set it something slightly lower than that if they want cpu(s) to be used other processes on the machine.
There is no dependency with LogFlushMethod, but there is one for LogBufMb:
If you change the value of LogBufParallelism, you also may need to change the value of LogBufMB to
satisfy the constraint that LogBufMB/LogBufParallelism >=8
Jim

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to assign values for more than one field

Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
      Assign (fieldname) to <l_field>.
      <L_FIELD> = 'ZB'. " value according to your requirement
      Assign (fieldname1) to <l_field1>.
      <L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
Brahmaji

Hello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD

How to alter user defined objects in oracle

Hi all,
Can any one tell me how to alter user defined objects in oracle .
Thanks,
P Prakash

prakash wrote:
Hi all,
Can any one tell me how to alter user defined objects in oracle .
DROP
then
CREATE
Handle:      prakash
Email:      [email protected]
Status Level:      Newbie (80)
Registered:      Feb 3, 2011
Total Posts:      185
Total Questions:      67 (65 unresolved)
so many questions & so few answers.
How SAD!
Edited by: sb92075 on Sep 22, 2011 9:22 AM

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

How to bind values for input parameters from an adf table?

Hi,
The version I am using is
Jdev TP4 11.1.1.0.0
I need to know how to bind values for input parameters to methods.
I have created an af:table and I have a button created using a method which is outside the af:table. This method needs to take input parameter values from the column values in the table.
When I have an adf form instead of the table the binding works.
Any help?
Thanks.

Hi Balaji,
you need to bind you table to a backing bean and call a method in the backing bean when you hit the button. In the method you get the selected row from the table and have access to the columns of it. Then call the the method with the parameters.
To bind the table to a bean select the properties of the table, go to behavior section and look for the advanced section 'Binding' property.
Select the small down arrow at the right side and click edit. In the dialog select or create a bean and property for the table.
Go to the button properties, look for 'Action', again select the small down arrow and click 'Edit'. Select the bean which holds the table property and create a method for the button.
The method look like    public void bearbeitenQuelle(ActionEvent actionEvent)
        // Add event code here...
        RichTable lTable = getYourTable();
        Object lData = lTable.getSelectedRowData();
        FacesCtrlHierNodeBinding lNB = (FacesCtrlHierNodeBinding) lData;
        YourViewRow lRow = (YourViewRow ) lNB.getCurrentRow();
    }Hope the get you started
Timo

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

How much concurrent conection is allowed in oracle 10g XE?

How much concurrent conection is allowed in oracle 10g XE?

Hi,
>>How much concurrent conection is allowed in oracle 10g XE? I think that the default value on Oracle XE for the SESSIONS parameter is 40.
Then, if you will need more concurrent sessions accessing the database, you need increase this value using alter system command for this parameter.
Cheers

How we create new data base in oracle 10g express edition

hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM

How do we find instance name in ORACLE 10g

Hi All,
How do we find SID name in Oracle 10g
Thanks in advance
Pandiarajan

Apology accepted.
But yes, of course I was harsh (not at you, actually, but at the plonker who thinks he can tell me that 'echo $something' is "not right").
Do you know how many questions could be answered here if people weren't forever debating perfectly acceptable answers? If people actually stopped to read what had been written before deciding to add their tuppence-worth? If people stopped to think, "well, that's not how I would answer it... but it's good enough".
I see so many threads here where 58 people dive in to a thread to say, 'Me too'. Another 42 will dive in to say, 'that's not right' when actually it is. And another 137 or so will usually chime in to say nothing very much except to demonstrate that they didn't understand something that was explained a lot earlier on quite clearly. Threads go on and on, when actually all that was sought originally was a simple answer to a technical issue. God knows why it happens.
I have no problem at all being asked for clarification. I have no problem at all being corrected and having someone point out that actually that parameter doesn't exist, you made a typo, that's not the command to achieve X. When I am technically wrong, I would expect nothing less. But where so much of my time gets wasted is demonstrated in this thread perfectly. I answered the question in one post. It might not have been a perfect answer. There are many different ways of coming up with the answer on Windows, for example, and yet I didn't mention the registry at all or the Control Panel/System applet for checking environment variables once. And yet, despite all of that, in answer 1 there was sufficient information to make the OP happy. But no, that's not enough to shut some people up (and I am again not referring to you at this point).
I don't know what it is. Some sense of, maybe, in a democracy my opinion is as good as yours even if it's entirely unnecessary, potentially confusing and adds absolutely nothing to the outcome? A desire on the part of some people to boost their post numbers?
Too right I'm harsh. I am results-driven. I am here because I want to help others. Not because I think my opinions deserve a hearing even though the answer was posted ages ago. When I see something that looks like the opposite of that -grandstanding, look how clever I am, my opinion counts too- yeah, it annoys me somewhat. And largely because I usually end up having to untangle the confusion caused by unnecessary "contributions" from others.

Can cold backup be taken for ASM managed oracle 10g databases

Can cold backup be taken for ASM managed oracle 10g databases
Pls help

do we still need to take cold backupYou need to take backup. Hot or cold depends on how your DB is running (archivelog or not).
Will we have file permisions for copyng Use RMAN and don't worry about that.

How to alter value for processes in Oracle 10g XE

Similar Messages

Maybe you are looking for