How to apply sap license for Sap Netweaver AS Java

Hello guys,
May i know how to apply sap license for SAP Netweaver AS Java? Appreciate the reply, thank you
regards,
wei how

Hi Lee,
check below link:
http://help.sap.com/saphelp_nwce10/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
Thanks
sunny

Similar Messages

Apply the SAP license for the HA from the Application itself

Hi Experts,
i want to apply the SAP license for HA installation from the application itself i mean from the transaction slicense
but my question is:
should i run the SAP application on node A and apply license there useing tcode SLICENSE
and then switchover the resources and run the application on the node B and apply another one there or what?
Note: this installation based on ABAP AS only
if there are any other ways please let me know?
Thanks
Sherif
Edited by: Sherif Eid on Jan 24, 2008 10:54 AM

Sherif,
First, Install the license to CI;
Second,Swich CI to another node (backup server), and install another licence.
Joseph

Membership & license for SAP training Institute

Hi SAP Gurus,
I wanted to know how can I get the license for SAP Training institute.
On what basis SAP is giving the set up for consultant Company for Ex.
I am recruiting few consultants and providing the services to some companies then what may be Cost ( Rate of charge ) overall to take license .
Pls help in this matter.
GOD BLESS You .
Nancy.

Nancy
Try this:
How to Partner with SAP
http://www.sap.com/usa/partners/howtopartner/index.epx
Education Partners:
http://www.sap.com/usa/partners/categories/education/index.epx
Categories and Levels:
http://www.sap.com/usa/partners/categories/levels.epx

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

How to create OSS note for SAP?

Hi,
How do I create OSS for SAP? Any step by step or notes related?
appreciate your help!!!!!!
Thanks,

Hi Afi,
If you are looking for creating an oss message with SAP follow the path
http://service.sap.com/notes --> Report a Product Error --> select your system --> Enter the search term ( related to your issue) and componenet ( if its basis BC , change management BC-CTC , if its for solution manager use SV-SMG or the sub component )
Now it will show the related oss notes and if that notes are not helpful you can create a message with SAP by clicking create message.
Thanks
Prince Jose

How to know print program for SAP Script

Hi friends,
how to know print program for SAP Script form name ?

Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
                       out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
    where id = in_tab-value.
if sy-subrc = 0.
    read table out_tab index 1.
    move scustom-name to out_tab-value.
    modify out_tab index sy-tabix.
else.
    read table out_tab index 1.
    move 'No name' to out_tab-value.
    modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
   READ TABLE out_par WITH KEY 'NAME1'.
   out_par-value = l_name1.
   MODIFY out_par INDEX sy-tabix.
endform.

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How you complete impact analysis for SAP Universe

hi,
i want to know that how to how you complete impact analysis for SAP Universe

EdPC-SCB,
have you tried enabling auditing?
- Yes, audit log only shows user's activities which isn't useful for us. Please let us know any audit log that might be helpful .
For most of the servers listed in the CMC there is an "Audit" tab. I'd say if you have the disk space in your database for Auditor available, then if in doubt turn it on (at least for a while) to see if it exposes what you are seeking to find out --that'd be the quickest way. The documentation (xir2_bip_auditor_en.pdf) doesn't offer much in helping you to see a correlation between ticking on an Audit option in a Server and how it will populate in the Auditor DB -- most of us just hunt and peck until we get what we want. Once you have the good stuff in each of the Servers ticked on you'll be able to track down which report recieves which object. To help youself out initially, you should run every report that you can find so Auditor will get seeded.
thanks,
John

How to print double sided for SAP without exporting

Hi Friends,
Could you explain me that how to print double sided for SAP without exporting? Thanx.

Hi,
As per your query this is printer facility not to SAP. You have to define your printer in double printing by default and get all the printout both side from any software like SAP,Excel,Word etc.
Anil

How to find backend user for sap bw on Hana

Hi expert,
how to find backend user for sap bw on Hana , which are used to communicate with Hana.
Many Thanks.

Hi There,
Goto DB02,
Click on SQL Editor:
Execute the below Query:
select :session_user from dummy;
Regards,
Krishna Tangudu

How to apply Structural Authorisations for Report

Hi All,
We are using structural authorisations in our project and it is working fine for all processes. But we are facing problem for reports.
Kindly guide on How to apply structural authorisations to SAP Standard Reports and Custom reports.
Thanks & Regards,
Prashant

Hi Prashant,
Yeah LDB is a good way of implementing Structural auth. Apart from that you can assign the Authorization Group in the Z-report attribute. So users who are part of this group only can access this report. This also applies to the standard reports as they are already assgned to standard Authorization Groups.
Br/Manas

How to renew my license for Photoshop cs2?

I bought a Photoshop cs2 disk years ago and used to work with it without any problem. However, now the dialog appears saying that I should apply for a new admission to use the license, and , moreover, that I may use a telephone channel. Here, I finally got to a web site for a chat with you. Could you help me how to activate my present license?

Dear Trevor and John,
Thank you for your kind advice. I have realized that cs2 is no longer
supported.
Since my old iBook G10 is also going to be out of date, I will replace it
for a more recent type with appropriate new soft wares. Thank you again for
you assistance.
S.T.
2013/12/1 John Waller <[email protected]>
Re: How to renew my license for Photoshop cs2?
created by John Waller <http://forums.adobe.com/people/John+Waller> in *Photoshop
General Discussion* - View the full discussion<http://forums.adobe.com/message/5888623#5888623

How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

In this forum, we can't help with purchasing issues.
My suggestion is to call that phone number.

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

How to apply sap license for Sap Netweaver AS Java

Similar Messages

Maybe you are looking for