How to attach search help to a particular feild in the selection screen..

Hi all,
how can we put a search help for a field in the selection screen.
i have to attach search help for this.
SELECT-OPTIONS: s_xabln FOR qals-mblnr. "GRS No

Find out the respective search help and use like this...
Parameters : p_pernr type pa0001-pernr MATCHCODE OBJECT prem .
Here PREM is the search help for PERNR

Similar Messages

How to attach search help in a particular field in se80 screen

Hi All,
Can any one tell me how to attach a search help in a particular field in a screen.
Wat search help is used to display material no and description
Thanks in Advance
Regards,
Priya

Hi Priya,
In the Screen Layout, Double click on the field on which you wish to attach the search help.
In the properties window you can specify the search help for that field.
Search help for Material No. is MAT1.
You can find it in the Table structure (SE11) , "Entry help/check" tab.
Regards,
Himanshu

Hi how to attach search help to a field

hi all,
how to attach search help to a field.

hi
Attaching a search help to a field
A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
Attach search help to a data element / table or structure field / screen field / check table.
Conventionally search helps are attached to table fields or data elements. We shall see the same.
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
In this case, the search help is only available for this screen.
IF YOU WANT TO ATTCH A SERACH HELP TO THE SCREEN FILED THIS IS THE CODE
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
* IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
* SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
* PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
* FIELD_TAB =
* RETURN_TAB = RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
REWARD IF USEFULL

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

How to attach search help in field BEDNR in table EKPO

Hello, Experts!!!
I have a problem in attaching Search Help in field BEDNR in table EKPO.
Can anyone share something about this.. I've been dwelling on this for some time now,
but still wasn't able to find a solution.
Any thoughts would be highly appreciated.
Thank you!!!
Ellainne22

Hi,
I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
or go for modification & change the dataelement.
Regards,
Gokul

HOW CAN I PLACE 2 PUSHBUTTONS SIDE BY SIDE ON THE SELECTION-SCREEN?

i want to place 2 buttons but using my code, the other goes below the first. Can anyone help me?

hi,
write as below
selection-screen: pushbutton 10(30) text-003 user-command
clk1 modif id sg1,
pushbutton 50(50) text-004 user-command clk1
the push buttons appear in the same line.
reward if useful,
thanks and regards
Edited by: hema bobbili on May 23, 2008 6:58 AM

How to get search help for 2nd parameter based on the 1st parameter value

Hi all!
 I have 2 parameters (material no, revision level). I have created a search help for revision level. It has an importing parameter :material no. and one exporting parameter : revision level.When I checked it, it's giving the revision values only for the specified.
In my report , I have kept these 2 materials in my selection screen.For revision level , I have added the matchcode object which I have created. When I pressed F4 for revision level, it's giving all the values irrespective of the material no. in the first parameter. How to solve it? Please suggest.

Hi,
Try this code filling internal table fields,
DATA: BEGIN OF values,
 OID TYPE ZCL_OBJECT-OBJECTID,
 ODEC TYPE ZCL_OBJECT-OBJECT_DESC,
 END OF values,
 W_FIELD(10).
DATA: ZCL_PROJECT-PROJECTID type zcl_project-projectid,
 ZCL_OBJECT-OBJECTID(5).
DATA: progname TYPE sy-repid,
 dynnum TYPE sy-dynnr,
 dynpro_values TYPE TABLE OF dynpread,
 field_value LIKE LINE OF dynpro_values,
 values_tab LIKE TABLE OF values.
CALL SCREEN 100.
*& Module VALUE_PROJECTID INPUT
 text
*MODULE VALUE_PROJECTID INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'ZCL_PROJECT'
 fieldname = 'PROJECTID'
 dynpprog = progname
 dynpnr = dynnum
 dynprofield = 'ZCL_PROJECT-PROJECTID'.
*ENDMODULE. " VALUE_PROJECTID INPUT
*& Module VALUE_OBJECTID INPUT
 text
MODULE VALUE_OBJECTID INPUT.
 CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = progname
 dynumb = dynnum
 translate_to_upper = 'X'
 TABLES
 dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
W_FIELD = FIELD_VALUE-FIELDVALUE.
SELECT OBJECTID
 OBJECT_DESC
 FROM ZCL_OBJECT
 INTO (VALUES-OID,
 VALUES-ODEC)
WHERE PROJECTID = FIELD_VALUE-FIELDVALUE.
 APPEND VALUES TO VALUES_TAB.
ENDSELECT.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'OID'
 dynpprog = progname
 dynpnr = dynnum
 dynprofield = 'ZCL_OBJECT-OBJECTID'
 value_org = 'S'
 TABLES
 value_tab = values_tab.
ENDMODULE. " VALUE_OBJECTID INPUT
*& Module INIT OUTPUT
 text
MODULE INIT OUTPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'ZCL_PROJECT-PROJECTID'.
APPEND field_value TO dynpro_values.
IF SY-UCOMM = 'BACK'.
 LEAVE program.
ENDIF.
IF SY-UCOMM = 'ANS'.
 LEAVE TO SCREEN '0'.
ENDIF.
ENDMODULE. " INIT OUTPUT
START-OF-SELECTION.
WRITE: / field_value-fieldvalue,
 W_FIELD.
LOOP AT VALUES_TAB INTO VALUES.
 WRITE / VALUES.
ENDLOOP.
if sy-subrc <> 0.
 WRITE / field_value-fieldvalue.
endif.
Plzz reward points if it helps

How to add * wild card to a specific field on the selection-screen.

Hello,
How to add a * WIld card to a field in selection screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_STCTS FOR G_STCTS OBLIGATORY, "NUMBER SCHEME
S_AT20A FOR G_ATTR20A, "SUBSTANCE ID
SELECTION-SCREEN END OF BLOCK B1.
I need to add Wild card functionality to Number scheme field S_STCTS on selection-screen.
Any suggestions would be apprecaited..
Regards,
Kittu

Hi Kittu,
Here is one sample code:-
select-option : s_name like kna1-name1.
start-of-selection.
if s_name-low = '*'.
select * from kna1 into table it_kna1.
elseif s_name-low = 'pat*' or s_name-low = 'pat'.
select * from kna1 into table it_kna1 where name1 like 'Pat%'.
endif.
In case of wild card Select should be :-
select * from <dbtab> where <field> like 'P%'.
You can also use RANGES in your Code.
E.g. RANGES: R_OBJNR FOR JEST-OBJNR
R_OBJNR-SIGN = 'I'.
R_OBJNR-OPTION = 'CP'.
R_OBJNR-LOW = 'K1*'.
R_OBJNR-HIGH = 'K2*'.
Hope this helps.
Thanks & Regards
Jitendra Gujarathi

Attaching Search Help to a field

HI All,
Can anybody please tell me how to attach search help to a particular field??
Thanks.

hi
good
Attaching to a Table Field or Structure Field
The search help can be used by all screen fields that refer to the table field or structure field. The search help parameters and the fields of the table or structure must be assigned to one other in this type of attachment.
If an export parameter of the search help is assigned to a table field, the contents of this parameter are returned to the corresponding screen field as soon as the user has selected a line of the hit list in the input help. If an import parameter of the search help is assigned to a table field, the field contents are used for the value selection (see Value Transport for the Input Help).
Normally some parameters of the search help cannot be assigned to a table field. The assignment is thus left open for some search help parameters. A constant or any other field that is searched for in the module pool when the input help is called can also be assigned to a search help parameter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/1b70bfc32111d1950600a0c929b3c3/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/1b70c2c32111d1950600a0c929b3c3/content.htm
thanks
mrutyun^

Attaching Search Help to Standard Field

Hi,
In QAPP table, i want to attach customized Search Help to USERN2 field. So i take access key for that data element but still it's not modifiable mode.
so can you please tell me how to attach search help to that field.
Regards,
Pushkar.

Hi,
Goto to the table QAPP, goto the entry help/check tab and in that keep the cursor on the field USERN2 and press the search help button below the tab and you can insert the search help only if you have the access key to changes.
Reward if useful.
Thanks,
Muthu.

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

How to include Search Help which has been created using SE11

Hi all,
I have created the custom search help in SE11. What is the way to include it in my code? Thanks in advance.

Hi Mil,
There are different ways of using the search help created by SE11 depending on the kind of application you are using.
1. Search help can be attached to a DATA ELEMENT under the tab FURTHER CHARACTERISTICS.
Now wherever this data element will be used, automatically the search help will be available on the output screen. e.g. in selection screen using parameters statement etc.
PARAMETERS: P_VAL1 TYPE Z_DATAELE.
2. Search help can be also attached to database table fields directly in the tab Entry help/check. Now wherever this database table field is used e.g. in SELECT-OPTIONS statment, the search help will be automatically available on output selection screen.
3. Also, search helps can be directly used in the programs using function modules and event.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
Here in the module, you can use following function module for fetching the search help on the screen.
F4IF_FIELD_VALUE_REQUEST
4. Search help can be direclty attached to the selection screen statements like SELECT-OPTIONS using MATCHCODE object extension
SELECT-OPTIONS: LP_STATS FOR TJ30-ESTAT MATCHCODE OBJECT ZH_TJ30 NO-EXTENSION NO INTERVALS.
Hope this sort out your issue.
PS If the answer solves your query, plz close the thread by rewarding each reply.
Regards
Message was edited by:
Sapna Modi

How we can attach search help directly to the table field / structure field

Hi All,
Can you please let me know the step by step procedure of How we can attach search help directly to the table field / structure field.
Regards,
jaya

Hi Jaya,
1. Create a search help using SE11.
2. Include this search help in the field of table in SE11. There is a tab in the table defination where you can specify the search help.
Even you can specify search help at data element level, screen field level.
Reward points if useul.
Regards,
Atish

How to use search help in layout of se51

how to use search help in layout of se51.

Hi,
One of the important features of screens is that they can provide users with lists of possible entries for a field. There are three techniques that you can use to create and display input help:
Definition in the ABAP Dictionary
In the ABAP Dictionary, you can link search helps to fields. When you create screen fields with reference to ABAP Dictionary fields, the corresponding search helps are then automatically available. If a field has no search help, the ABAP Dictionary still offers the contents of a check table, the fixed values of the underlying domain, or static calendar or clock help.
Definition on a screen
You can use the input checks of the screen flow logic, or link search helps from the ABAP Dictionary to individual screen fields.
Definition in dialog modules
You can call ABAP dialog modules in the POV event of the screen flow logic and program your own input help.
These three techniques are listed in order of ascending priority. If you use more than one technique at the same time, the POV module calls override any definition on the screen, which, in turn, overrides the link from the ABAP Dictionary.
However, the order of preference for these techniques should be the order listed above. You should, wherever possible, use a search help from the ABAP Dictionary, and only use dialog modules when there is really no alternative. In particular, you should consider using a search help exit to enhance a search help before writing your own dialog modules.
Input help from ABAP dictoinary
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
Field Help on the Screen
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa6135c111d1829f0000e829fbfe/content.htm
Field Help in Dialog Modules.
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards,
Vara

How to attach search help to a particular feild in the selection screen..

Similar Messages

Maybe you are looking for