How To auto mount ACFS at reboot

Hi,
Has anyone tried to automount the ACFS mount point at boot...?
Thanks in advance.

Hi,
user10912686 wrote:
and the solution is ?
I use grid infrastructure standalone.
If it's impossible or not support, why it's possible to use acfs filesysteme on grid infrastructure standalone, but impossible and unsupport to mount the FS ?It's not supported but it's possible...look this:
Oracle ACFS Filesystem managed by OHAS on Oracle Restart
http://levipereira.wordpress.com/2011/07/28/oracle-acfs-filesystem-managed-by-ohas-on-oracle-restart/
P.S: I am replying to those who have the it doubt.
Regards,
Levi Pereira

Similar Messages

  • How to: Auto mounting and recheck on a Mac

    Hello all, i've been using the below for a couple of months on my WD, its worked great in all that time and havent had an issue.  The reason I started using this was so that my PLEX software would always be able to access my WD and stream, as they are located on difference machines. I have no idea if anyone has found a better way, but for me this is the best I could initally find and then adapt to make it more centric to my needs. We're going to make an automator application, so on your desktop goto 'GO -> Applications -> Automator'When Autormator loads up, click new doccument and then select 'Application'. We want application because we can make this process automatic on log in, and as an application we wont need the automator software to load up. With the new application, search of 'AppleScript' in the search bar and then drag across Applescript into your work flow. Copy and paste the below into the box, changing what your need.  If you only want to mount one share, then its just { "ONESHARENAME" } without the need for a comma. property myDisks : {"YOUR", "SHARE", "NAMES", "HERE"}
    set mountedDisks to paragraphs of (do shell script "/bin/ls /Volumes")
    repeat with aDisk in myDisks
    if aDisk is not in mountedDisks then
    mount volume "afp://YOUR.WDMYCLOUD.IP.HERE/" & aDisk as user name "USERNAME" with password "PASSWORD"
    end if
    end repeat If you were to save this now, whenever you double click the application it would mount the said shares for you without needing you to log in or select which shares you want to mount. The reason I use AFP (this scipt works with SMB too for windows users BUT....) is that it is unbelieveably faster than SMB, however, I did notice that the connection would randomly unmount itsself if it hasnt been used for a couple of hours - which makes sense I suppose, but for my system - it needs to be ALWAYS mounted.  So with just two more steps we can make it so the script will automatically check every 10 minutes for the shares, and if they arent mounted then it will remount them again wihtout any human intervention or popups. STEP 2).  Drag another blank applescript underneath the one we just created.  Paste in it; on run {input, parameters}
    delay 300
    return input
    end run  Delay 300 is how many seconds it will wait before redoing the check. STEP 3).We now need to make this loop infinitely for an always on system, or atleast always doing it whilst you are using the computer. Where you initally searched for the term 'Applescript', delete that off and search for 'Loop'.  Drag the loop option below the two applescripts and select the options;"Loop automatically" and for everytime write -1 -1 is importnant as this makes the loop cycle infinite, then finally the last setting is "use the original input".  Save it as an Application somewhere, then goto your System settings, USER, Login items, click the + to add one, and search for where you just saved this application and.. Success!   Everytime you log in or start the mac, it will initiate this always on script .  Hopefully someone else finds this useful.  The inital part of the script was found on the internet somewhere, I cant find the link now to give credit, it was adpated for multiple shares and the log in section.  

    cpt_paranoia wrote:
    Interesting workaround, but, like Raphael, this puzzles me: > I did notice that the connection would randomly unmount itsself if it hasnt been used for a couple of hours - which makes sense I suppose Unmounting autonomously doesn't make any sense to me. But who knows what's in the mind of the Ghost of Steve Jobs...My Mac Mini does not have the random unmounting nor have I ever encountered the Ghost of Steve Jobs, although Quality Assurance has gone down a notch as I notice the askewness of some fonts in the calendar since the passing of Jobs and this random unmounting could be the QA of a thousand people working on Yosemite rather than a hundred. RyLeTo wrote:
     Im personally very very happy with the WD, I think its hugely versatile and its been on 24/7 for over a year and I have never had a problem since I stopped installing 3rd party software via terminal.My sentiments exactly. For me I never had a problem since I stopped installing the latest firmware and impatiently rebooting when the white light stayed white.  Everyone remember to give RyLeTo a Kudos to ensure his trapping allegiance as a future FREE Volunteer WD tech supporter. 

  • Auto mount CIFS

    I know that there are many post and solutions regarding how to auto mount CIFS shares.... but for some reason I cannot get any of them to work.
    Here is what I know.
    1) I used to use fstab.  But not fstab requires root access to mount CIFS Shares
    2) I have tried smbnetfs as described here: [url= https://wiki.archlinux.org/index.php/sa … c_mounting ] Samba .  This results in extremely slow browsing to the network share and my credentials being denied.  It is possible that I have not set up the ~/.smb/smbnetfs.auth file correctly.  I also get the message:
    WARNING: Unkown libsmbclient version: 4.1.6
    SMBNetFS may not work as expected.
    3) I have tried autofs Autofs with no luck.
    4) I would be willing to mount from the terminal or a script file.  However, when I mount with
    sudo mount -t cifs //networkstorage/01_media  /home/user/Network/01_media -o username=xxxx,password=xxxxx
    I do not get rear/write privileges.
    5) I know the CIFS share is set up correctly.  Because if I brows to the share using thunar I can mount the location (with password and username) and get full read write access.
    Can anyone suggest what is the best method for mounting.  So that I can begin trying to fiqure out how to make it work for my system.  Or if I could get some advice on what I am doing wrong in the terminal so that I could get R/W privileges.
    Thanks!

    You tried the fstab, but you didn't specify what youactually put in the fstab.  There is an option which should enable you to mount the cifs filesystem as a normal user... it is the same option as any other filesystem.  Have a look at the mount man page, as it has the information you are looking for.
    I don't know what smbnetfs is or how one would use that, but from a quick gander at the package info it appears to be a fuse filesystem.  You also didn't give even a hint of what happened when you tried autofs, or in what way you failed.
    I think what you might really be looking for is an automounting daemon though.  I'm not sure how they work with network shares that require a password, but you might want to have a look.  This would be how the DEs handle automounting.  In particular, there is udev{,2} that seems to be the most common solution.

  • How to turn off auto mounting of server on boot?

    I've got an old MacPro that is running Mavericks but is having an issue where the finder constantly crashes and restarts. I think it may have to do with a an old server (an external Mac mini) that would mount when the MacPro booted up because I now get an error message telling me that the Mac Pro can no longer find that server (which makes sense as it is no longer there). If I leave the error window open and don't click 'ok', the Finder remains intact and the crash loop does not begin. If I click 'ok' in the server connection error window, the problems begin.
    …So, where do I "turn off" this auto mounting of the old mac mini on boot? I've looked in my Login items in the system prefs and no such task is there, and I can no longer recall how i even set up this automount function.
    Thanks for any help you can offer.
    Mark

    Repair Disk.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair.Macintosh HD.
    Click First Aid.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Click Restart.

  • How Do I find out what app is auto-mounting a network share and stop it?

    I have a new laptop, the 13" rMBP.  I installed Steam and wanted to use the network share on my server to store the game files.  Everything went OK.  I closed Steam, disconnected the share and shutdown my laptop.  When I opened my laptop later on at work, it started to try and mount the network share.It keeps on going it.  I removed the Steam app and all files related to Steam that I could find.  I've looked at fstab, auto_home, auto_master and a large list of other files and directories and I *still* cannot find the offending file that's auto-mounting the share.  It's really frustrating.
    The share auto-mounts when I am home but not on the desktop or in finder.  I find it by looking at /Volumes/ in terminal.  If I mount the share manually under /Volumes/ it shows as Games-1 and mounts on the desktop under Games.
    Does anyone have any ideas on where I should be looking to find the offending process/file/daemon?
    Thank you!
    Trevor

    thanks for the reply but are you sure about this? What difference would it make? Why 5 apps?
    Even if it does work, which I doubt, at some point, I will have to resync ALL my apps again and surely the same thing will happen again, and I will be none the wiser. I still won't know which app it is. There must be a way of finding this out.
    Any ideas?
    What is really freaking me out is how it is connecting to my carrier (who is charging me) with Cellular data switched off.......?
    Thanks again.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • How to setup ivman to auto-mount ntfs partition using ntfs-3g

    Hi,
    I use ivman/pmount to auto-mount removable devices,
    but for ntfs partitions, it mounts by type "ntfs" which can not support "write"!
    But I can not figure out how to config ivman to do that,
    can someone help me, please?
    BR,
    bsdson.tw

    Hi,
    I use ivman/pmount to auto-mount removable devices,
    but for ntfs partitions, it mounts by type "ntfs" which can not support "write"!
    But I can not figure out how to config ivman to do that,
    can someone help me, please?
    BR,
    bsdson.tw

  • GNOME: How to get usbstick to auto-mount

    Hi there,
    This quite puzzles me. A few months ago, a friend of mine gave me his usbstick, and the thing just auto-mounted when plugged into a free USB port. Now I got my own stick, but no auto-mount, and mount /dev/sda1 doesn't work either ("no block device"). hotplug, dbus, hal, and udev are running. Do I need a special udev rule or something?
    Is there an easy, step-by-step guide somewhere how to set up Arch linux to (auto-) mount usbsticks? The Wiki entry isn't very helpful.
    Thanks,
    -Sascha.rb

    OK, forget it. The usbstick was broken, got a new one, works out-of-the box as it's supposed to ...
    First time I heard of a broken usbstick, though. Just my luck.

  • How do I stop a CCC partition auto mounting in Lion

    I have an external USB drive with 2 partitions. The first partition has a CCC Clone of my drive before Lion. The second is used for Time Machine. This drive auto mounts on boot which is fine but the CCC partition causes problems with the App Store as it sees Apps that I installed in the Clone backup as installed on Lion. The easy way for me to fix this is just to eject the CCC partition but I have to do this every time I boot. Is there a way of just stopping this drive from auto mounting on boot and manually mounting if need be. Any help would be appreciated. Many Thanks in advance.

    I just upgraded to the latest version of Lion--I don't know why it didn't change the info. under my Apple icon.  And I know I can uncheck the box while signing off, but you have to do it each time--I'm looking for a way to uncheck it and recheck whenever I want, the way the dock options are supposed to work (although it doesn't for me anymore with Lion).
    Checked the Users and Groups--the only login items listed are basically 4 apps that I had back when I had my PC and I no longer have them--I may have had Growl for awhile but I deleted it.  There are yellow triangles by them.  No other apps listed there.
    I guess I'll have to uncheck the box each time I sign off.  Tedious, but that's the way it is.  Wish I had Snow Leopard back!
    Thanks for your suggestions though--just wish they worked.

  • How to stop auto-mount of server?

    I am trying to troubleshoot an issue on a client's iMac that I am providing tech support for. It was originally configured by another IT person who is now unable to be contacted.
    The iMac seems to have some sort of auto-mount in operation that periodically connects to a shared folder hosted on another iMac on the network, but with the incorrect permissions. If I eject the server, it reappears soon afterwards on the Desktop. It looks like this:
    Double-clicking the icon brings up a message that the Shared files can't be accessed because of insufficient permissions.
    I have looked in the Login Items, Startup Items, LaunchAgents and LaunchDaemons but can't find any evidence of any script or plist that might be causing this auto-mount behaviour.
    Can anyone shed any light on this?
    Cheers,
    Greg

    Great idea! However, I actually need access to a Shared folder on that Mac (with correct permissions). You'll see from my screenshot above that the same folder appears twice, once with the proper shared volume icon (with full access and correct permissions), and once with the 'folder with red bar' icon without any access (and incorrect permissions).
    I might try deleting all keychain entries relevant to that shared folder and see if that helps.
    If anyone else has any ideas, they would be gratefully received.

  • How do I mount an airport drive for multiple logged in users

    I have a large shared drive for itunes storage.  I have 4 users and if I mount the drive for one user, if another user logs in it gets -1 appended.  Is it possible to mount the drive for a single mount point for all users?

    Hi,
    Old thread I know, but I'm having a very similar problem. Did you find a solution?
    For anyone else that could possibly help:
    I have a network attached storage with a shared drive on it (call it 'shared'). I have an iMac (Mavericks) with two user logins (call them 'me' and 'her'). I have the drive auto mounting on first login for each user with a basic script:
    tell application "Finder"
              mount volume "smb://me:[email protected]/shared"
    end tell
    All good so far. The problem is whoever logs in first after a reboot gets the drive named "shared" whoever logs in second gets "shared-1". Doesn't seem like a problem except programs reference the drive, so whoever has "shared-1" gets an ! next to every song in the shared iTunes library.
    Does anyone know of a way to get two users on the same machine to mount the same drive (with different credentials) and not have OSX append the "-1"?
    Cheers.

  • External hard drive and SD card won't auto mount

    I am using MBP with retina on Yosemite. MacBook Pro (Retina, 15-inch, Late 2013).
    On Maverick, all my external drives used to auto mount. The same was true just after Yosemite was installed. Lately, only my Time Machine hard drive auto mounts and others don't, e.g. my backup drive that I use with Super Duper! and my camera SD card. I have to go to disk utility and mount them manually. I did not see any option for auto mount in disk utility.
    Could you please guide me on how to get auto mount back?
    Thanks in advance

    I have been dealing with this same issue for the past several months. Running a Macbook Pro (Mid 2010) with OS X Yosemite 10.10.1. This problem occurs when I plug in Firewire, USB, or SD card. The external hardware appear to be working fine, it has to be either a setting, or a quirk that needs corrected with Yosemite. I have run all OS systems since Snow Leopard. Never had this problem. Anyone have any ideas?

  • Disable Gnome auto mount for one specific UUID

    I am using Gnome 3 (gnome disk utility,udisks,udev stack i think).
    I have a device (Garmin Edge 800) that I am only going to use in Virtualbox so I want to prevent it from automatically mounting in Gnome. However I want other devices to auto mount as normal so disabling auto mount entirely isn't an option.
    The device got two UUIDs and previously I could write a HAL fdi policy to ignore devices with those UUIDs, but now that HAL is deprecated I am not able to figure out how to do this.
    Last edited by lessthanjake (2011-06-29 09:56:30)

    There's probably a udev config file somewhere (udev wiki perhaps) but you can do it with fstab "noauto" that's what I do for partitions I don't want to auto mount.

  • Working auto-mount?

    Hi all,
    I have a xfce4 desktop installed. I want an automount service. I tried autoFS, with the following settings:
    auto.master
    /media /etc/autofs/auto.custom --timeout=15
    auto.custom
    disc -fstype=auto,ro,nodev,nosuid :/dev/cdrom
    Backup -fstype=auto,user,rw,async,umask=000,gid=users,noatime,nodiratime :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
    ## Backup -fstype=ext4,user,rw,async,umask=000,gid=users,noatime,nodiratime :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
    Shared -fstype=ntfs-3g,user,rw,async,umask=000,gid=users,noatime,nodiratime :/d ev/disk/by-uuid/565AF3085AF2E421
    ReaderCard -fstype=vfat,flush,user,rw,async,umask=000,gid=users,noatime,nodirat
    ime :/dev/disk/by-uuid/0102-0304
    ##ReaderInt -fstype=auto,async,nodev,nosuid,umask=000,gid=users :
    ## Other medium here
    # floppy -fstype=auto,async,nodev,nosuid,umask=000 :/dev/fl
    The files are formatted following the instructions. The partition Backup, however, does not come up ("no such file or directory", even when root).
    Backup is ext4 and it's kept on an external hard drive, the same of Shared. Mounting it manually works. I have tried with simpler options (as simple as
    Backup -fstype=auto :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
    with no results. Autofs won't do.
    As an alternative I have tried xfce volume manager, but that doesn't work with ANY external device.
    Please help. Thank you.

    That would be a solution - if it worked. I tried that too. The Arch wiki just glances on the setup, solving the whole question with a one liner "Thunar-volman's automount doesn't work currently because of the hal to udev switch, Sept 2010"
    The section on udev is obscure, mentioning to check policykit to "properly start your session".
    However the policykit page is also obscure, containing no mention about starting X session properly or even improperly for what matters.
    The default setting produces no result at all.
    Nowhere I was able to find a five-lines working example of set up. I have used Linux daily since 2000 (and I know it should not take more than 5 line explanation to setup an auto-mount).
    I am really embittered by this interpretation of "the arch way". The documentation on certain core tools such as policykit is completely insufficient and the defaults do not solve basic problems (hours to set up a basic auto-mount? incomplete wiki pages referring each other?).
    Arch could be a perfect desktop distribution with just a pinch of attention to put the obvious features, when correctly disabled by default, at easy reach through complete examples. (Shutdown buttons? Same story: one line reference to policykit, dbus and other 10 tools with not the barest explanation about how to use them in synergy for the purpose. Result? Manual shutdown for the moment).
    If you could provide a working setup for thunar volume manager I'll be happy to use and add it to the wiki.
    Thank you.

  • Stop Auto Mount of SMB Home Folder

    For awhile, I tried SMB home folders for network users.  This worked poorly, so i went back to using AFP.
    However, for most users, their  network home folder is now getting auto mounted by SMB at login.
    I've checked WGM manager to make sure they have AFP homes and that no SMB home is assigned.
    I've checked the users control panel to see if there is an automount setup there.  Nothing.
    Where else could auto mount information be stored and how can I find it to wipe it out?

    Normally it would be a matter of changing the server to register the AFP share as an auto mount for user home directories, then you have to use Workgroup Manager to reconfigure each user to select the new share location which should now be listed in the Home tab in Workgroup Manager.
    If you only do the first step the user account will still be set to the original settings.
    Is this using Open Directory and a Mac file server? The process might be more complicated if your using Windows Active Directory, and typically a Windows server does not do AFP.

Maybe you are looking for