How to automate the functionality of Oracle Mobile - Thick client  USING  OATS

Hi Guys ,
We have a Oracle Mobile - Thick Client installed  on a windows 7 machine and  when used OATS  its not recognizing  the way to automate. the attached is the snap shot . Please advise the way or protocol to automate the Oracle Mobile.
Thanks

Hi Vinod,
Thanks alot for your help in this regard
Requesting you to please clarify here which BADI is the relevant one.PFB the screenshot for your easy reference.Because we found nearly 4 BADIs related to this scenario.Please through some light here once.
Thanks in Advance!
Regards,
Lakshmi S

Similar Messages

  • How to see the Source IP Address of a client using ACE One-armed-mode to load balance HTTP proxy request

    I'm using an Ace 4710 Appliance deployed in One-Armed mode, using Source NAT to loadbalance HTTP request to a couple of Proxy servers.
    Everything is working fine, but the thing is that I can't see the Clients IP addresses on Proxy's logs, so I can't keep track of them.
    The Interfaces and Nat configs are:
    interface vlan 200
      description Server-Side-VLAN
      bridge-group 5
      nat-pool 5 10.1.1.5 10.1.1.5 netmask 255.255.255.0 pat
      service-policy input VIPS
    interface vlan 300
      description Client-Side-VLAN
      bridge-group 5
    interface bvi 5
      ip address 10.1.1.3 255.255.248.0
      description Client-Server-Virtual-Interface
    ip route 0.0.0.0 0.0.0.0 10.1.1.1
    and the policy map looks like this
    policy-map multi-match VIPS
      class Port80
        loadbalance vip inservice
        loadbalance policy Port80
        nat dynamic 5 vlan 200
    Resource assignment:
    sticky ip-netmask 255.255.255.255 address both RESOURCE-CLASS
      timeout 5
      serverfarm Service80
    Any suggestions will be appreciated,
    Thanks

    Hi Kanwal,
    Thanks for your quick reply,
    I've already tried this but it didn't work. The problem is that I don't manage the proxy servers so I rely on their skills to see the logs.
    The Proxies are Squid. Do you know if they need to do something else on the servers to see that field of the HTTP header?
    But I'll try again tomorrow and let you know how it goes.
    Thank you again.

  • How to automate the Acrobat Reader plugin in Internet Explorer

    Hi,
    I have been trying to figure out how to automate the Acrobat Reader plugin in Internet Explorer. My goal is to find a way to allow users of our web application to print PDFs to the default printer without having to go through the plugin's GUI. Our application includes a browser helper component, and I had hoped it would be possible to use the IWebBrowser2 interface's get_Document() method to get at some sort of interface to the plugin (as is possible for, say, a Word document hosted in Internet Explorer) and then use this to print the document. However, this does not work: get_Document(), when called on an IWebBrowser2 instance with a PDF loaded, returns E_NOINTERFACE. I also tried calling the IWebBrowser2 interface's ExecWB() method with OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, and PRINT_DONTBOTHERUSER, and printed a blank page rather than the PDF.
    Is it possible to do what I am attempting? Like I said, my core goal is to print a PDF from within Internet Explorer without requiring user interaction. I'd appreciate any suggestions as to how I might accomplish this -- it doesn't _have_ to be by automating the plugin (maybe that is a the wrong approach... though it sure would be nice if the plugin provided access to its object model via IWebBrowser2->get_Document()).
    Thanks in Advance,
    Steve Mckinney
    Senior Developer
    Paxon Corporation

    IF that were entirely true, then the whole purpose of this thread is moot (automating printing server side). It is possible to load the file via URLs using the following html code:
    "<"body>
    "<"OBJECT id="pdf"
    type="application/pdf"
    width=800
    height=600 >
    "<"param name="src" value="http://localhost/pdfs/vorder_nc.pdf"/>
    "<"/OBJECT>
    "<"script language="JavaScript">
    function waitLoad()
    setTimeout("printFile()",2000);
    function printFile()
    var objPdf = document.getElementById('pdf');
    objPdf.PrintAllFit(1);
    "<"/script>
    "<"/body>
    So, if I used php or some other scripting language on the server to fill in the name of the pdf, I can load it via a URL, wait a couple of seconds for it to load, and then print it without user interaction. I wish that the LoadFile method would load a URL so that when it returns, I know it is loaded and I don't have to put faith in a timer that may not be enough for a large file.
    This is the situation I'm in. This way works but I don't like the timer. I'd rather have the plugin let me know when it's loaded. Is there another method that can help me do what I want?
    Thank again.

  • How to wrapped the function and procedure

    Hello friends,
    I wanna know that how to wrapped the procedure and the
    functions in oracle i know little bit about the
    wrapping but how can i unrapped the procedure of function
    plz help me i am realy thx to you.

    You can not un-wrap a procedure/function once it has been wrapped.
    look at the following documentation for the wrap utility:
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/c_wrap.htm

  • OB52 Posting Period Close:  Does anyone know how to automate the close?

    Does anyone know how to automate the FI Period Close (trans code OB52)?  Currently, the business users go into the screen and open and close any periods manually.  For the MM period close, we are able to do so because we found the program to use in the batch job.  For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created.  Does anyone know of the actual program used for the FI period close?

    Use program RFPERIOD_OPEN.  It may help.  For further details you may check the following thread.
    RFPERIOD_OPEN

  • How to store the images in Oracle?

    Hi,
    I am a new developer, trying to find out how to store the images in Oracle. Is there anyway that I can store the images in Oracle and insert them into my html file?
    Thanks!
    Sarah

    There is a simple image example available from OTN.
    From the OTN main page, go to Products --> interMedia --> Sample Code. The name of the example is "Load rich media content with a browser."
    This example loads and retrieves an image from an Oracle8i database through a web page using the Oracle interMedia Web Agent.
    Hope this helps.
    null

  • How to get the function name/ID  of the current page

    HI,
    I searched the forum and google, but it is not clear on how to get the function name of the current page.
    I have 4 functions in my self service A ,B,C,D (seeded page links ) they all have to go to a page called hhhPG. Based on which function user is clicks I have to show the data in hhhPG.
    so my question is how to get the function name ? I mean I need to know if user click on link A , B, C or D link and came to this page.
    I found below in one forum and also there is getfunctionID in pageContext , but I do not know what to pass to getfunctionid("???") to get value.
    FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
    Or is there a better way of know where user is coming from ? like geturl....
    Please help, I need this ASAP.
    Thank you.

    Use below to find out how the user came into the page
    FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
    boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
    boolean isFunc2 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME2"));
    boolean isFunc3 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME3"));
    boolean isFunc4 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME4"));
    So one of them will be true based on the function the user came in.
    Write your logic based on these flags.
    Regards,
    Peddi.

  • How to get the function name in controller class

    Hi experts ,
    I am new to the OAF framework.
    i have created the two functions and bot he the function have the same controller class .i want to capture the function name or function id in the controller class.
    can you please let me know how to get the function id or function name in the controller class.

    Hi apurba,
    Thanks for the quick reply.
    i am trying to get the function name from the FunctionSecurity class,
    However in FunctionSecurity class there is no such method defined as getFunctionName();
    my requirement is ,i have two functions functionA and functionB defined.
    both the function has the same controller class.in controller class ,i need to get the function name ,based on the function name
    i will redirect the page to respective page.
    looking forward for you response.
    appreciate your help
    Thanks,
    KT

  • How to automate the flatten transparency in illustrator?

    How to automate the "Flatten Transparency option" in illustrator via javascript. Please share with me.
    Thanks

    I'm looking for the same thing.
    app.executeMenuCommand('Flatten Transparency'); works in CC but all it does is it brings up the window and you still have to click OK to make the script continue.
    Before anyone asks why do  you want to do it etc. In print thereare instances where you have to open and edit (not text) large numbers of pdfs to change colours, outline fonts etc otherwise there's trouble on print devices.
    My script for instance looks for 100K blacks and replaces them with rich black, looks for empty text frames, overprint, bleed settings, clipping paths etc.
    The only way to edit successfully a pdf without fonts is to place it and flatten transparency outlining fonts and then work on it.
    So back to the point. After the window pops up, is there a way to simulate a keystroke like "Enter" or maybe app.executeMenuCommand('Flatten Transparency'); takes arguments like:
    app.executeMenuCommand('Flatten Transparency',preset_name);...?
    Anyone? Adobe SDK team? :-)

  • How to automate the data load process using data load file & task Scheduler

    Hi,
    I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
    I have created Data_Load.bat file but rest of the process i am unable complete.
    So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
    Thanks

    To follow up on your question are you using the maxl scripts for the dataload?
    If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
    If you are using maxl use this as the batch
    "essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

  • How to automate the exchange rates in BI

    Hi Guys
    can any one let me know the step by step approach of how to automate the exchange rates in BI...I know that if we right click in source system and say transfer exchange rates ..we will get those values ....But I want to automate this process in BI with a Process chain...I have created a start variant and connected it to a ABAP process type and calling the RSIMPCURR programm in sync..local....Do I need to call any Program event ? Iam not able automate this..please advice step by stepp
    After ABAP process type do I need to create any other steps ?
    regards

    Hi,
    All you have to do is to define the ABAP Process as new process variant, call mode syncronous, called from local, program name RSIMPCURR, and define a program variant for example number 12 and create it, there you select the update exchange rates., go to attributes, give a meaning and save all. You can automate the start of the porocess chain and select it as period job.
    Regards
    MK

  • How to automate the data flow to content servers?

    We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!

    What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
    I can't see a reason to automate that process
    Regards
    Juan

  • How to modify the database by Oracle-ridc-client

    How to modify the database by Oracle-ridc-client

    First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
    While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

  • How to identify the locks in oracle db objects? i dont have access to check

    How to identify the locks in oracle db objects? i dont have access to check the v$lock or v$ objects. i dont have dba access. what are the symptoms for table, row or objects lock? how v guess it would be lock?
    Thanks in advance friends..

    I believe you will have to call your DBA on the phone in that case.
    You can query something with a select ... for update nowait.
    If it raises an exception you can handle it within a when section.
    -- Running in one session
    SQL> create table t1 as select 1 col1 from dual;
    Table created
    SQL> select * from t1 for update nowait;
          COL1
             1
    SQL>
    -- now running in a different session
    SQL> select * from t1 for update nowait;
    select * from t1 for update nowait
    ORA-00054: resource busy and acquire with NOWAIT specified
    SQL> set serveroutput on
    SQL>
    SQL> DECLARE
      2    CURSOR cur1 IS
      3      SELECT col1 FROM t1 FOR UPDATE NOWAIT;
      4    v_col1 NUMBER;
      5    locking_error EXCEPTION;
      6    PRAGMA EXCEPTION_INIT(locking_error, -00054);
      7  BEGIN
      8    OPEN cur1;
      9  EXCEPTION
    10    WHEN locking_error THEN
    11      dbms_output.put_line('Busted locking my rows!');
    12  END;
    13  /
    Busted locking my rows!
    PL/SQL procedure successfully completed
    SQL> Now, surely you won't be able to tell anything else other than there was something locked there.
    But none of the details you would find in the views.

  • How to debug the function separately which is added in the package

    Hi Friends, I want to know how to debug the function separately, by taking it from package,. and i dont no where to add begin and end. and dont no how to give input to the function. ANd how to find the error which is detected from production, so i want to find from which statement its failing. So please guide me to proceed further. thanks in advance.

    { FUNCTION fn_get_trail_id (p_incr PLS_INTEGER DEFAULT 1) RETURN PLS_INTEGER IS
    p_trail_id tb_xop_orders_trail.trail_id%TYPE;
    BEGIN
    IF p_incr >= 1 THEN
    SELECT sq_xop_trail_id.NEXTVAL INTO p_trail_id FROM DUAL;
    RETURN p_trail_id;
    ELSIF p_incr = 0 THEN
    SELECT sq_xop_trail_id.CURRVAL INTO p_trail_id FROM DUAL;
    RETURN p_trail_id;
    END IF;
    END;
    -- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
    BEGIN
    ppr_openlog('AQ');
    ppr_request_lock(v_cb_handle, v_cb_lock);
    pr_xop_log_errors('AQ: ==== cb started ('||descr.msg_id||') ====');
    my function is like this, how i can i in clude it in declare statement, and how to assign values for that.. and where i have to include "begin".plz help me

Maybe you are looking for