How to avoid * in summary of ALV?

RFKOFW00 output shows * in the totals line - in front of the Company Code.
How to avoid this?
I went into debug but am not able to pinpoint how this is getting populated even thoug the ALV input table does not have a *.
Thanks
Ven

hi here is a sample code with totals check it,
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
           t_outtab                = it_ekko .
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
regards,
venkat.

Similar Messages

How to avoid multiple selection in ALV tree control?

Hi,
Experts,
I want to avoid multiple selections on Alv tree control after pressing control keyboard button(Ctrl). Even by pressing Ctrl keyword button i want to select only one row of a Alv tree control.i have used cl_salv_tree class for it is there any method to achieve this please pass some code/idea on it.
Thanks in advance,
Shabeer ahmed.

I haven't tried it before but it should help.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01]

How to avoid the Summary Fields in CrossTab

Hi all,
I have created a report using crosstab view,,,in that i have selected two fields in the value column..but in the summary field i need to select only one column....
but i cann't select only one field in the summary..Is that possible....if so please help me on this.....
Thank You,
Katchsathish

Hi Kuldeep,
Condition 1:
If you try to take one Dimension and one measure like Year and sales revenue using e-fashion demo universe then new column inserted will be nested when using cross tab where the measure values will be spread across multiple columns.
In this case you have to use condition to refer individual column names like
=[Sales revenue] Where([Year]="2001" )+ [Sales revenue] Where([Year]="2002")
and calculate the sum.
Select the measure column in the cross tab then click the u201CInsert Sumu201D button it will display the sum in the last column of the cross tab then you can modify the formula generated to specify the condition which columnu2019s sum you want o display in that column.
Ex: Use e-Fashion universe and take Year and sales Revenue turn it to cross tab and follow the process I mentioned.
Condition 2:
However if you use one dimension and multiple measure like the one you are using where you are trying to calculate sum of col1+col2 and so on. In this case you can directly insert the column and calculate the sum of column referring their names.
Ex: Use e-Fashion universe and take objects Year, Sales revenue. Quantity sold, Discount, margin here you can directly sum individual column values like sales revenue, quantity sold and discount +margin by inserting the column in between the columns using u201Cinsert Columnu201D
I Hope this helpsu2026
Thanksu2026
Pratik

How to avoid color printing in alv

Hi All ,
I am using alv standard print functionality to take printout.
My problem is when i am taking printout in color printer its printing key fields in blue color in background and i want printout in black&white whether i am using color printer.
Thanks

Hi Sandeep,
Try if this works
After giving print (Ctrl+P) you will get a popup to select the printer.
Click on properties
Expand the node "Output"
Select "Supress Colors"
Chosse the checkbox "Supress Colors/Shading in printout"
Regards

How to avoid blank column display in output in ALV TREE

how to avoid blank column display in output while decreasing the length of other columns in ALV Tree.
Example: please refer to BCALV_TREE_01 and see the output, then decrease the length of all columns . Then you can see a blank column appearing in screen at last, i.e in container. so how to avoid that.
Thanks for reply.
Edited by: morpeous on Jul 1, 2009 1:53 PM

Hi,
Check BCALV_TREE_02 on how to hide columns.
Thanks & Regards,
Anand Patil

ALV List Output: How to avoid data statistics from printing in Background

Hi,
I am running an ALV list display in Background mode and the output is showing the data statistics first and then the actual output of the ALV...
I dont want the data statistics to be printed..
How to avoid that.. is there any to do it...

Hi Neela
If you are using the good old REUSE_ALV_GRID_DISPLAY function module, you should be able to suppress the List Info if SY-BATCH is 'X' using the IS_PRINT parameter.
MOVE 'X' TO is_print-no_print_listinfos .
Presumably there is a similar parameter using classes.
Cheers
Lyal

How To avoid column heading for only total line in ALV list Display

Hi,
How To avoid column heading for only total line in ALV list Display.

Hi,
to change colunm header field catlog is built
look at the example below
Changing column text headers
use this to change, hide, or alter the ALV columns
CLEAR: gt_fcat.
READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
*TEXT1 is your field name
 ASSIGNING <gtfcat>.
IF sy-subrc = 0.
 <gtfcat>-coltext = 'Date Type'.
 <gtfcat>-no_out = ' '.
 <gtfcat>-tooltip = 'Date Type Text from IT0019'.
 <gtfcat>-seltext = 'IT0019'.
keep seltext to '' if u want to hide
ENDIF.
regards
austin

How to avoid extended checks for the events used in ALV.

Hii,
I hav delvpd an alv report in which i hav used events for which i haven't declared PERFORM for the same. but when i had checkd in the Extended program checks it says that form interface is not called directly.. check for dynamic PERFORMS...
how to avoid this error in the extended check program.

Another option can be calling the routine from the program itself with a check that never satisfies.
like:
if 1 = 2.
perform top_of_page.
endif.
form top_of_page.
endform.
Regards,
Joy.

How to avoid db file parallel read for nestloop?

After upgraded to 11gr2, one job took more than twice as long as before on 10g and 11gr1 with compatibility being 10.2.0.
Same hardware. (See AWR summary below). My analysis points to that Nestloop is doing index range scan for the inner table's index segment,
and then use db file parallel read to read data from the table segment, and for reasons that I don't know, the parallel read is very slow.
AVG wait is more than 300ms. How can I fluence optimier to choose db file sequential read to fetch data block from inner table by tweaking
parameters? Thanks. YD
Begin Snap: 13126 04-Mar-10 04:00:44 60 3.9
End Snap: 13127 04-Mar-10 05:00:01 60 2.8
Elapsed: 59.27 (mins)
DB Time: 916.63 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 4,112M 4,112M Std Block Size: 8K
Shared Pool Size: 336M 336M Log Buffer: 37,808K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 15.5 13.1 0.01 0.01
DB CPU(s): 3.8 3.2 0.00 0.00
Redo size: 153,976.4 130,664.3
Logical reads: 17,019.5 14,442.7
Block changes: 848.6 720.1
Physical reads: 4,149.0 3,520.9
Physical writes: 16.0 13.6
User calls: 1,544.7 1,310.9
Parses: 386.2 327.7
Hard parses: 0.1 0.1
W/A MB processed: 1.8 1.5
Logons: 0.0 0.0
Executes: 1,110.9 942.7
Rollbacks: 0.2 0.2
Transactions: 1.2
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 75.62 In-memory Sort %: 100.00
Library Hit %: 99.99 Soft Parse %: 99.96
Execute to Parse %: 65.24 Latch Hit %: 99.95
Parse CPU to Parse Elapsd %: 91.15 % Non-Parse CPU: 99.10
Shared Pool Statistics
Begin End
Memory Usage %: 75.23 74.94
% SQL with executions>1: 67.02 67.85
% Memory for SQL w/exec>1: 71.13 72.64
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
db file parallel read 106,008 34,368 324 62.49 User I/O
DB CPU 13,558 24.65
db file sequential read 1,474,891 9,468 6 17.21 User I/O
log file sync 3,751 22 6 0.04 Commit
SQL*Net message to client 4,170,572 18 0 0.03 Network

Its not possible to say anything just by looking at the events.You must understand that statspacks and AWR actualy aggergate the data and than show the results.There may be a very well possibility that some other areas also need to be looked at rather than just focussin on one event.
You have not mentioned any kind of other info about the wait event like their timings and all that.PLease provide that too.
And if I understood your question corretly,you said,
How to avoid these wait events?
What may be the cause?
I am afraid that its not possible to discuss each of these wait event here in complete details and also not about what to do when you see them.Please read teh Performance Tuning book which narrates these wait events and corresponding actions.
Please read and follow this link,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#i18202
Aman....

How to avoid database logon dialog on every action of refreshing reports

I am using Crystal reports 208 SP2 and has a database connection to oracle database. Connection is esablished and report retrieves desired data, The problem is when ever i open this report ( which has this connection set) and do a refresh, the report the LogOn dialog pops up.
How to avoid or save this log on info such that it does not pops up the LogOn dialog when i open the report and do a refresh(F5).?

Hi Don,
Thanks for the reply. To try your suggested approach, i need some clarifications .
_Problem summary:for refrence, _
I am following the steps mentioned below to establish a database connection, and fetch the data.
1) I am using Oracle drivers for configuring the ODBC data source. As part of configuration i will specify the Oracle server name
2) In crystal reports, Using "Database" menu, i open "Database Expert" dialog and "Make New connection" by specifing the data source mentioned in step 1). During this process, (ODBC)logon information will be filled in. The user ID and password used has all the rights to access the tables in the database. Logon will be successful and connection is established.
3) Further i use the database table from the "Database Expert" on to the report and refresh(F5) to fetch the data.
After step 3, I close the report and reopen it. Now trying to refresh the database logon dialog pops up. I need to avoid this pop up
Requesting Clarification:;
1) You have specified "When you connect you have the option to use Trusted Authentication, check this option on". Where is this option. Is it in the crystal reports or is it available during data source configuration. Kindly specify.
2) Here "Enterprise logon info that has been configured on the Oracle server." implies the oracle database login information right? If yes, this login details are available and i am using this logon information(i.e. UseriD and Password) during database connection.
If No, Is "Enterprise logon info " is something which should be specifically enabled by DBA in oracle11g configuraion.
Kindly suggest.
Edited by: R Guru on Oct 17, 2009 7:32 PM

How can we sort records in alv, give example

how can we sort records in alv, give example

Hi
Setting Sort Conditions
It is possible to set sort conditions for the table data. This is achieved by filling an internal table of structure LVC_T_SORT which consists of the sort criteria. To have an initial sorting, pass it to the parameter IT_SORT of the method set_table_for_first_display.
FORM prepare_sort_table CHANGING pt_sort TYPE lvc_t_sort .
DATA ls_sort TYPE lvc_s_sort .
ls_sort-spos = '1' .
ls_sort-fieldname = 'CARRID' .
ls_sort-up = 'X' . "A to Z
ls_sort-down = space .
APPEND ls_sort TO pt_sort .
ls_sort-spos = '2' .
ls_sort-fieldname = 'SEATSOCC' .
ls_sort-up = space .
ls_sort-down = 'X' . "Z to A
APPEND ls_sort TO pt_sort .
ENDFORM. " prepare_sort_table
Preparing the table for sorting settings
We have two important points to tell about this topic. First one is that, be ready for a short dump if any one of the fields given to be sorted is not in the content of the field catalog. Secondly, when you make ALV Grid to sort data, by default it vertically merges fields having the same content. To avoid from this for all of the columns, you can set no_merging field of the layout structure to X. If you want to disable merging for just some columns, set no_merging field of the field catalog row corresponding to that column.
You can get and set sort criteria applied whenever you want by using methods get_sort_criteria and set_sort_criteria, respectively.

Sort Using FACTORY CLASSES
Sorts CL_SALV_SORTS
we can add some sorting to the ALV grid. Create the object reference variable and receive the object using the GET_SORTS method of the GR_TABLE object. Next, add the sort by calling the ADD_SORT method of the GR_SORTS object.
report zalvom_demo1.
data: ispfli type table of spfli.
data: gr_table type ref to cl_salv_table.
data: gr_functions type ref to cl_salv_functions.
data: gr_display type ref to cl_salv_display_settings. data: gr_columns type ref to cl_salv_columns_table.
data: gr_column type ref to cl_salv_column_table.
data: gr_sorts type ref to cl_salv_sorts.
data: color type lvc_s_colo.
start-of-selection.
select * into table ispfli from spfli. cl_salv_table=>factory( importing r_salv_table = gr_table changing t_table = ispfli ).
gr_functions = gr_table->get_functions( ). gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ). gr_display->set_striped_pattern( cl_salv_display_settings=>true ). gr_display->set_list_header( 'This is the heading' ). gr_columns = gr_table->get_columns( ).
gr_column ?= gr_columns->get_column( 'CITYTO' ). gr_column->set_long_text( 'This is long text' ). gr_column->set_medium_text( 'This is med text' ). gr_column->set_short_text( 'This is sh' ).
gr_column ?= gr_columns->get_column( 'CITYFROM' ). color-col = '6'.
color-int = '1'.
color-inv = '0'.
gr_column->set_color( color ).
gr_sorts = gr_table->get_sorts( ).
gr_sorts->add_sort 'CITYTO' ).
gr_table->display( ).
Regards
Ravish

Reward if useful to you
Message was edited by:
Ravish Garg

How to avoid to print decimals in the output

Hi,
Please suggest me how to avoid getting decimals in the output.
The variable that i am using is RKMNG. While declaring it i have used it in this manner, rkmng type p decimals 0.
but this only avoids fetching the data with decimals, when i am trying to print this value to the output using ALV FM, the decimals are appearing.
Please can u provide me how to remove these three decimals that are appearing in the output.
Thanks,

do this :
data : lv_var like i.
move rkmng to lv_var.
print lv_var.

How to avoid merged columns on conversion

Dear All,
I have built some reports using Oracle Developer Report Suit. All is well and working fine but when I send report output to Excel file I am facing following two issues:
1) It goes always to .xls file which is excel 97 format and having limit of maximum 65 thousands rows. Can I convert report to excel 2010 .xlsx file as my reports sometime contains large number of rows?
2) When I convert into excel all information comes normally with proper format but some of report columns occupy multiple excel columns which is causing difficulties in sorting and other function in excel. How to avoid it?
I would be glade to hear from you guys to resolve above issues.
Thanks!

Zia wrote:
1) I have a detail report which contains more than 100 thousands rows. This report is already on menu and available to users. User have got an option on menu that they can select output either 'screen' or 'spreadsheet'. If user select option as 'spreadsheet', report open in excel file but in old excel and truncating excessive rows as .xls have limitation of maximum 65 thousands rows. I do not want to use 'csv' format as directly conversion into excel is more convinient for users. If report contains less than 65 thousands rows then everything is fine and no issues with the report. I hope I could explain real problem this time.65 thousands rows is the limitation of that version u use. I use Microsoft Office 2010 where limitation is 1048576 is a sheet.
One solution is uninstall the present Office version and use Office 2010.
2) Regarding second point, I have a summary report which is all fine and showing desired output in desired format. But when user want output in excel file, some of report columns occupy more than one columns and causing difficulties for users. Actually users do need to convert few reports into excel and work with formulas in excel but in this situation they have to do lots of changes in format before applying formulas. A sample screen shot of a report and converted report in excel file both can be seen on this link [https://skydrive.live.com/?cid=573511bde4261fe6#cid=573511BDE4261FE6&id=573511BDE4261FE6%21120]
I'm not sure about the solution. Most probably you have more space in repeating frame and cause this thing happen. shorter the space in the frame and try.
Hope this will help you.

How to avoid duplicates values from alvgird see below code

how to avoid duplicates values from alvgird see below code
in below query docno no is repeated again and again
how i can avoid duplication in this query.
select * into corresponding fields of table itab
 from J_1IEXCHDR
 inner join J_1IEXCDTL
 on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
 where J_1IEXCHDr~status = 'P'.

Hi Laxman,
after that select statement
select * into corresponding fields of table itab
from J_1IEXCHDR
inner join J_1IEXCDTL
on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
where J_1IEXCHDr~status = 'P'.
if sy-subrc = 0.
delete adjucent duplicates from itab comparing <field name of itab internal table>
endif.
this will delete your duplicate entries.once you done with this call the alv FM.
 call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'IT_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 i_grid_title = 'Purchase Order Details'
I_GRID_SETTINGS = I_GRID_SETTINGS
 is_layout = wa_layout
 it_fieldcat = it_fieldcat
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
 it_sort = it_sort
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
 it_events = it_event
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
 tables
 t_outtab = ITAB
exceptions
 program_error = 1
 others = 2
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Thanks
Vikranth Khimavath

How can i suppress columns in ALV ?? Will reward points.

Hello Gurus, how can i suppress column in ALV when i`m using the transparent table:
CALL METHOD grid->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZIANEXE'
        is_layout        = wa_layout
        is_variant       = wa_variant
        i_save           = 'U'
        IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
      CHANGING
        it_outtab        = itab[]
        it_fieldcatalog = fieldcat.
Please help.

in the fieldcatalog you are providing there is a field NO_OUT use this.
Loop over internal table and check fieldname. If fieldname = column you want to hide, NO_OUT = 'X'.
Edited by: Micky Oestreich on May 8, 2008 12:06 PM

How to avoid * in summary of ALV?

Similar Messages

Maybe you are looking for